Best Fysetc in 2026

Motor Model: 42-34 Nema 17, widely work for Most 3D Printers (like CR-10 Series Z-axis or Ender-3 X/Y/Z-axis), machinery and equipment.

High torque -Holding torque up to 0.35Nm. Low loss stators have better high speed performance.

Size: 42mm X 42mm X 34mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable.

3D Printer insulation Heat Bed Accessories: Strong sound insulation and absorption performance, heat-resistant, fire prevent, durable, healthy, cold-resistant, waterproof, low thermal conductivity, shock absorption and antisepsis.

Function: Apply to 3D Printer Heated Bed, aluminum substrate, PCB hot bed, silicone hot bed bottom.

Dimensions (L*W*H): 300 x 300 x 8mm ( 12"x12"x 0.3" ); compatible with 3D Printer Crealty CR-10/ CR-10S/ Ender 3 max (Build plate 310mm size).

Size: LW 200 x 140(7.8x5.5 inch) x 0.1mm, widely compatibility with ELEGO Mar/Mars2 Pro/Mars3/ANYCUBI Photn/Photn M3/PhotonMono 4K/Phrozn Sonic Mini 4K/Crealty Halot-one/LD-002R/LD-002H/Voxela Proxima 6.0/Longe Orange/Wanhao UV/Monopric Mini Deluxe SLA/Nov 3D LCD SLA DLP 3D Printer or other same size 3D Printer frame.

High-Quality Fep Film: Heat resistant and durable quality. Perfectly smooth, scratch-free, perfectly cut, chemical resistant, UV stable, and more durable.

High light transmittance: 95% light transmittance ensures the high stability of UV lightning to support precise printing.FEP melts at high temperature, passes through the extrusion equipment, and is poured into a similar plane to form with uniform thickness.

Model Number: 10M Rubber Opening Timing belt, 3d printer accessories.

Upgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Arc tooth minimizes the chance of the belt slipping, runs quieter. Nice smooth movements.

Wide range of applications: Widely used in 3D printers, such as ender 5 plus, Vorn Series, Prus MK3S, Anycubi Vyperr, milling machines, gear forming machines, drilling machines, CNC lathes, hobbing machines, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, any diode laser, and other mechanical transmissions.

Wide Compatibility: Work well on all 3D Printer hot bed, including spring steel build plate, aluminum or glass bed, PEI sheet, 3d printer stickers etc.

Convenience: Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water.

Help in 3d printing: Paste it on hot bed beforce printing, strong adhesion to the hot plate, perfect first layer. It is easier to remove the printing models.

3D Printing Build Surface Great Upgrade Heatbed Plate Sheet: can install on a hoted bed and glass platform, just fit for PLA TPU Wood filament, not for ABS PETG filament.

2 in 1 Plate: the A plate is flexible, it is easy to move it away from build platform and take away printed models, New version B plate about 1.2mm/0.047inch, much thicker than that 0.7mm with strong adhesive, stick on the build surface

Please Kindly Note: the plate is magletic, the temperature (recommended from 50 to 75 degrees centigrade) should not exceed 80 degrees. so it works well for PLA TPU Wood, not suitable for ABS PETG filament. if the heatbed temperature is beyond 80 degree, it will lose magletism or turn to be bent.

Upgraed universal Adjustable Filament Holder: New Design, this new version can steadily stay on the desk, also can be mounted on the bracket. It can meet different usages, convenient. The base provides some weight and the 4 pads can prevent skids, the rollers turn very smoothly.

Apply to all printing filament, Suit for 0.5KG 1KG PLA ABS 1.75mm 3.0mm 3d printer filament, especially Heavy TPU filament.

Widely Used for all 3D printers, including CR-10S S4, Ender 3 etc.

Application：Excellent 3D Printer heat sinks with back adhesive: Work well for 3D Printer Reprap MKS Gel stepper motor driver and other motherboard.

Quality: High quality and durable with long service life. These sinks are beloved by our favorite engineers for their low cost, ease of use and low thermal resistance!.

Ｍaterial: Adopting special design and Anodized aluminium material to achieve faster heat dissipation. The fins increase the area of board and improve the cooling effect.

3D Printer replace accessories, ribbon Cable Breakout Adapter Board for Meg i3 Meg S etc 3D printer part.

Simple, high-quality, smart and high-precision.

With connector cable

Wide Adjust Range: this newest 3D Printer filament roller has a Wide adjustment range from 23mm-116mm/0.9inch-4.5inch to adapt to different filament reels, more flexible and practical. Suit for 0.5KG 1KG 3KG PLA ABS 1.75mm 3.0mm 3d printer filament. Here is about the installation Video --- https://www.amazon.com/live/video/0bb9ae15ce694f2e9c621263cf7f3e73?ref_=asvh_vdp

Material: this 3KG spool holder is made of high quality SPCC and Plastic, sheet metal Processing technology, fine workmanship, draws and slides smoothly to avoid jamming and winding of the spool. Make it more Stable, Durable, has a Long time lifecycle.

Upgrades: Adopt four U-shape wheels, width 6mm groove depth 3mm, making the movement of the consumable roll more stable and less prone to fall down.

A must spare accessory for Vorn 2.2/2.4: Hall Effect Terminal Limit Switch board. We have another Mechanical Limit Switch PCB board, please search ASIN ‏ : ‎ B09M3JVC45.

Vorn Hall effect endstop board for X/Y axis. Voltage: 5V, Terminal Connector:MX2.54(Mole-x 70543 series).

The Hall Effect board allows for contactless homing on the X and Y axis on a Voro 2. When hall sensor reaches close to magnet it produces a voltage. The circuit then compares that with a reference voltage. You need to modify the firmware by yourself.

A combination of duet3 mini5 + and Mini 2 +, for Mini 12864 LCD or 5i Smart Disply screen. For Vorn printer. Max input 28V. The firmware has been burned, only need to Set up your printer and update the firmware through the web interface. Support Wif and Ethernet by replacing the module for the switching. Supports external antenna.

Its main control chip and pin allocation are completely consistent with mini5 +. Based on same54p20 (arm cortex M4 @ 120mhz), it is fully compatible with duet3 mini5 +.

Upgrades on the power supply and IO protection, Input / output IO full with TVS protection, Automobile fuses( for hot bed input and main power input), all make it safer and more stable.

1.Stable Transmission: 5M Rubber Opening Synchronize Timing belt, a good replacement. High precision. High-strength structural design, anti-extension, anti-jumping, make the transmission more stable.

2.Upgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Arc tooth minimizes the chance of the belt slipping, runs quieter. Nice smooth movements.

3.Wide range of applications: Widely used in 3D printers, such as ender 5 plus, Vorn Series, Prus MK3S, milling machines, gear forming machines, drilling machines, CNC lathes, hobbing machines, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery and other mechanical transmissions.

5pcs/ Package

59Ncm(83.6oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x1.85" 4-wire

【Double Gear Extrusion Mechanism】The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.

【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.

【Application】This all metal dual drive extruder with motor kit is compatible with Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 5 Pro,Ender 5 Plus,CR10 Serie,Voxelab Aquila 3D printer.

Motor Model: 42-34 Nema 17, widely work for Most 3D Printers (like CR-10 Series Z-axis or Ender-3 X/Y/Z-axis), machinery and equipment.

High torque -Holding torque up to 0.35Nm. Low loss stators have better high speed performance.

Size: 42mm X 42mm X 34mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable.

45Ncm(63.7oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x1.57" 4-wire

1.8 deg. step angle(200 steps/rev)

High Torque: Usongshine stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance reactance, responsive and can avoid system error.Low loss stators have better high speed performance.

Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.

Module Size: 27mm/1.06in x 15mm/0.59in; Cable Length: 100mm/3.94in; Weight: 5g

Package Included: 1pcs stepper motor parallel modules with 1pcs 100mm cables, easy to connect.

Application: special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.

2mm pitch, 4 starts, 8mm lead

High torque nema 17 stepper motor, 400mN.m/57.1 oz.in, 42mm, 2 phase 4 wires

Come with a brass nut and 1M (39.37") motor wire

The TL-Smoother is an addon module for 3D printer stepper motor drivers

Lower vibration lower noise smoother result

The board provides flyback diodes (freewheeling diodes) for the motor outputs

High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.

Low Resistance: Usongshine stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Dimensions: 42x42x23mm/1.65""x1.65""x0.9"" ,1.8 deg. step angle(200 steps/rev),Rated current 1.0 A & resistance 3.5ohms.

High Torque: Adopting high quality motor steel material,with high torque 13Ncm(18.4oz.in), low self-inductance reactance, responsive and can avoid system error.

Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably increases the thermal conductivity of the motor. This effectively reduces the increase in temperature.

Wide Application: This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.

Double Z structure runs smoothly.

Simple assemble, no need other tools.

Cost effective upgrade kit and high performance.

Nema 23 cnc stepper motor, up to 425oz-in or 3Nm holding torque

Rated current 4.2A & resistance 0.9ohms. Step angle: 1.8°(200 steps/rev)

4-wire, 11.81" cable. Connection: Black(A+), Green(A-), Red(B+), Blue(B-)

The TL-Smoother is an addon module for 3D printer stepper motor drivers

Lower vibration lower noise smoother result

The board provides flyback diodes (freewheeling diodes) for the motor outputs

Package in 3PCS

65Ncm(92oz.in) holding torque

NEMA 17 bipolar 1.65"x1.65"x2.36" 4-wire

Good Torque Good Speed

0.35 deg. Step Angle

NEMA 17 bipolar 4-wire

High Torque Good Speed

0.067 deg. Step Angle

NEMA 17 bipolar 4-wire

Middle Size with Hight Torque

18Ncm(25.5oz.in) holding torque

NEMA 14 bipolar 1.38"x1.38"x1.34" 4-wir