Best Gallopmax in 2026

【𝐖𝐇𝐀𝐓 𝐘𝐎𝐔 𝐆𝐄𝐓】---One 360° rotatable, caliper press tool that can be used in any direction, and it is more efficient and easier to handle than most brake caliper presses. Two large push plates that can apply force evenly. Two caliper hooks to protect the brake fluid lines and calipers. A comprehensive instruction manual.

【𝐔𝐍𝐈𝐕𝐄𝐑𝐒𝐀𝐋 𝐁𝐑𝐀𝐊𝐄 𝐂𝐀𝐋𝐈𝐏𝐄𝐑 𝐏𝐈𝐒𝐓𝐎𝐍 𝐓𝐎𝐎𝐋】The brake caliper press tool is compatible from 1.5 inch to 3 inch. Thus, brake caliper compression tool can be compatible with 99% of twin and quad piston fixed calipers, as well as single and twin piston floating calipers. After installing the magnetic plate it is more suitable for six-piston fixed calipers. Admittedly, this tool can repair the brake pads of several cars, thus making the most of its value.

【𝐄𝐀𝐒𝐘 𝐓𝐎 𝐔𝐒𝐄】The adjustment switch allows quick switching between expansion and compression modes. The operating handle allows the centrally located ratchet to spread the force evenly in a parallel manner. At the same time, the extended handle and double riveting make use of the process both easy and stable. The brake piston can be compressed effortlessly in seconds. TIPS: BOTH SPREADER PLATES NEED PRESSURE TO START THE RATCHET.

Hook Coilover Adjustment Tool -- Made of sturdy carbon steel material, quenching and hardening HRC44-88, strong hardness, not easy to deformation.

Premium Craftsmanship -- Rust-proof powder coated shock spanner wrench set with non-slip handle for efficient and comfortable work, long-term use.

Universal Spanner Wrench Set -- 22-26, 28-32, 34-36, 38-42, 45-52, 55-62, 68-72, 78-85, 100-110mm, 9 sizes of shock wrench for most shock suspensions and coils.

Hook Coilover Adjustment Tool -- Made of sturdy carbon steel material, quenching and hardening HRC44-88, strong hardness, not easy to deformation.

Premium Craftsmanship -- Rust-proof powder coated shock spanner wrench set with non-slip handle for efficient and comfortable work, long-term use.

Universal Spanner Wrench Set -- 22-26, 28-32, 34-36, 38-42, 45-52, 55-62, 68-72, 78-85, 100-110mm, 9 sizes of shock wrench for most shock suspensions and coils.

Tool used on Knorr Bremse Calipers type SB SK SN typically found for Volvo Peterbilt DAF Foden MAN Mercedes Scania BOVA plus BPW SAF Trailers.

113826 OEM Replacement 11point x 3/8 D 26 mm long.

Our brake caliper socket replaces the original which was manufactured from Chrome Vanadium

QUICKLY FIT BRAKE PADS: Use the ABN Universal Caliper Disc Brake Screw-In Wind Back Rewind and Piston Compression 12-Piece Tool Kit Set to replace front or rear brake pads by rotating the piston back into caliper for fitting of new brake pads without damaging the pistons or seals; Choose the end that matches your caliper, insert the plate from the sliding handle end of the assembly using the center hole to get the plate over the thrust bolt assembly, align the two pegs with the screw-in caliper

COMPATIBLE: Universal for all screw-type calipers that require the piston to be wound back into the housing (not compatible with hollow pistons); Alfa Romeo, Audi, Austin, BMW, Citroen, Ford, General Motors (GM), Honda, Jaguar, Mazda, Mercedes, Mitsubishi, Nissan, Opel, Renault, Rover, Saab, Subaru, Toyota, Volkswagen

BUILT TO LAST: Constructed from all steel for strength and longevity; Adaptor plates with thrust bolt assembly and reaction plate are made with precision; Prevents damage to pistons and seals

✔ Premium Material -- Universal brake caliper press tool constructed from carbon steel and heat treated for strength and durability, not easy to bent. Rivet-reinforced non-slip handle, safer, comfortable and effectively extended service life.

✔ Feature -- Coming with 2 caliper hanging hooks suspend the caliper, brake hoses, and other parts for easy inspection of other car components when brake repair. It would be good for at home garage brake jobs.

✔ Professional Brake Caliper Tool -- Used for pressing automotive disk brake caliper pistons back into bore when replacing brake pads, not for drum brakes. Easy to use with the ratcheting feature.

【𝐖𝐇𝐀𝐓 𝐘𝐎𝐔 𝐆𝐄𝐓】---One 360° rotatable, caliper press tool that can be used in any direction, and it is more efficient and easier to handle than most brake caliper presses. Two large push plates that can apply force evenly. Two caliper hooks to protect the brake fluid lines and calipers. A comprehensive instruction manual.

【𝐔𝐍𝐈𝐕𝐄𝐑𝐒𝐀𝐋 𝐁𝐑𝐀𝐊𝐄 𝐂𝐀𝐋𝐈𝐏𝐄𝐑 𝐏𝐈𝐒𝐓𝐎𝐍 𝐓𝐎𝐎𝐋】The brake caliper press tool is compatible from 1.5 inch to 3 inch. Thus, brake caliper compression tool can be compatible with 99% of twin and quad piston fixed calipers, as well as single and twin piston floating calipers. After installing the magnetic plate it is more suitable for six-piston fixed calipers. Admittedly, this tool can repair the brake pads of several cars, thus making the most of its value.

【𝐄𝐀𝐒𝐘 𝐓𝐎 𝐔𝐒𝐄】The adjustment switch allows quick switching between expansion and compression modes. The operating handle allows the centrally located ratchet to spread the force evenly in a parallel manner. At the same time, the extended handle and double riveting make use of the process both easy and stable. The brake piston can be compressed effortlessly in seconds. TIPS: BOTH SPREADER PLATES NEED PRESSURE TO START THE RATCHET.

【APPLICATION】The brake caliper press is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches. Ratchet brake piston caliper works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers.

【ADVANTAGE】Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons.

【FAST& EFFECTIVE】Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”

【Simple & Easy】Specifically designed for compressing automotive brake calipers, simply insert it into the caliper and force the handle to retract the pistons for easy replacement of the brake pads.

【Hassle-Free】Features a 360-degree rotation design and reversible operation, allowing you to push the piston back from any angle and position without wasting time or effort.

【Damage-Proof】The dual-sided steel plates ensure even pressure distribution when compressing the piston, providing stability and preventing any potential damage to the piston.

★Material:The brake caliper piston is made of high quality steel, high strength, corrosion resistance, economical and practical, with long service life. The ratchet brake piston is equipped with 2 additional steel plates.

★Multipurpose: This brake caliper press is suitable for most brake caliper ratchets, four piston calipers for trucks and commercial vehicles, as well as single piston and double piston floating calipers.

★Features:The brake caliper is more time-saving and convenient to use than most other brake caliper presses. Ratchet technology provides 360 degree full rotation so that the spreader can be placed in any position. The centering ratchet screw produces a uniform force as it compresses the piston to ensure proper alignment and prevent damage to the brake assembly.

【Multifunction】The brake caliper press tool is compatible from 1.57 inch to 2.76 inch, works on double and four-piston fixed calipers, as well as single and two-piston floating calipers, is ideal for automotive brake pump adjustment.

【360-Degree Ratcheting & Switch】360° brake caliper press tool allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates, and to prevent damage to your brake components, adjustment switches allow for quick switching between extended and compressed modes, turn the plates anticlockwise to retract, and clockwise to expand.

【High Quality Thickened Push Plate】Brake piston compressor wrenchtwo large push plates is made of 45 gauge steel, which has excellent strength and toughness, and external black oxide finish resists rust and corrosion, for long term usage, because of ratcheting mechanism, both spreading plates need pressure to start the ratchet.

★Material:The brake caliper piston is made of high quality steel, high strength, corrosion resistance, economical and practical, with long service life. The ratchet brake piston is equipped with 2 additional steel plates.

★Multipurpose: This brake caliper press is suitable for most brake caliper ratchets, four piston calipers for trucks and commercial vehicles, as well as single piston and double piston floating calipers.

★Features:The brake caliper is more time-saving and convenient to use than most other brake caliper presses. Ratchet technology provides 360 degree full rotation so that the spreader can be placed in any position. The centering ratchet screw produces a uniform force as it compresses the piston to ensure proper alignment and prevent damage to the brake assembly.

Work of Single, Double, and Four Side Piston Brake.

Easy to install, easy to remove. Ratchet technology gives a full 360-degree swing so that the spreader may be placed at any position.Ideal for most large trucks and commercial vehicles with quad piston calipers.

Brake cliper hook Keeps calipers up and out of the way when servicing suspension components, brakes, etc

PRACTICAL DISC BRAKE PISTON TOOL -- Use the 3/8" Disc Brake Piston Remover Tool for changing your rear disc brake pads or rotors; Removes and installs disc brake pistons; Realigns piston slots (where applicable) to back of brake pad; Rotates piston back into caliper.

3/8-Inch DRIVE FOR MOST CARS -- Use with a 3/8-inch square drive ratchet to rotate the pistons back into the cylinder, can fit rear disc brake piston on most cars and light pickup trucks.

HOW THE BRAKE PISTON WORK -- This cube tool rotates pistons back into brake calipers when replacing brake pads on vehicles with rear wheel disc brakes; It removes and installs disc brake pistons, realigns piston slots to the back of the brake pad, and rotates the piston back into the caliper.

【2 Groups Of Push Boards Wider Application】This brake caliper press tool has 2 sets spreading plates, the bigger ones more fit for some sextuplet pistons fixed calipers, smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers, is designed to "push" the piston back, cannot twist and compress at the same time.

【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components.

【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates.

Professional Usage: The Caliper Wind Back Disc Brake Pad Piston Compressor Tool is used for brake pad replacement- rotating piston into the caliper for a proper fit; Works to wind back piston and provides enough clearance for new pads. Ideal for rotating piston back into caliper and exposing new pads

Universal Adapters: Includes 10 different piston adapters, universal for all screw-type calipers that require the piston to be wound back into the housing (not compatible with hollow pistons); it fits all domestic, European and Japanese cars

Long Last: All the parts are CNC machined alloy steel with rust-resistant sandblasted finish stand up to repeated use and long term service

Fit for non-destructive reset of brake piston.

Fit for most models with floating and fixed calipers,do not require an integrated handbrake function.

Made of no.45 steel,quenched at high temperature,strong and durable.

Complete disk brake service kit for most cars and passenger trucks

Includes piston and caliper tools, tubing cutter and bender, bleeding wrenches, SAE/metric hex bit sockets

Durable storage case keeps tools safe, clean and organized

Included: Brake piston calipers equipped with 2 large push plates and 2 brake caliper hooks.Hooks can hang calipers, brake tubing, and other parts to facilitate inspection of other car parts while the brakes are being repaired.The larger plates are held in place by built-in strong magnets and cylindrical pins for quick installation and removal.

High quality:Brake caliper compressor uses high strength spreading plates with 1/6 inch thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip.

Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers.

PRACTICAL DISC BRAKE PISTON TOOL -- Use the 3/8" Disc Brake Piston Remover Tool for changing your rear disc brake pads or rotors; Removes and installs disc brake pistons; Realigns piston slots (where applicable) to back of brake pad; Rotates piston back into caliper

3/8-Inch DRIVE FOR MOST CARS -- Use with a 3/8-inch square drive ratchet to rotate the pistons back into the cylinder, can fit rear disc brake piston on most cars and light pickup trucks

HOW THE BRAKE PISTON WORK -- This cube tool rotates pistons back into brake calipers when replacing brake pads on vehicles with rear wheel disc brakes; It removes and installs disc brake pistons, realigns piston slots to the back of the brake pad, and rotates the piston back into the caliper

Package Dimensions: 5.5 L x 9.7 W x 11.3 H (centimetres)

Fits multiple makes and models (contact with your vehicle for fitment compatibility information)

Package Weight: 0.189 kilograms

【Easy Operation】: The brake piston pressure tool adopts a 360° ratchet design, which can be used in any direction. The centrally located ratchet evenly distributes force in a parallel fashion as the piston is compressed to ensure proper alignment and prevent damage to the brake assembly. The extended handle can be easily extended from extended to retracted. Toggle the switch in the ratchet for positive and negative adjustments.

【Universal Disc Brake Caliper Piston Tool】: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Fits most large trucks and commercial vehicles. For two- and four-piston fixed calipers, as well as single and two-piston floating calipers. Tips for use: Both struts require pressure to activate the ratchet.

【Advanced car disc brake caliper piston retractor】: The thick push plate is made of 45# steel, which has excellent strength and toughness, and is not easy to deform. The ratchet system and adjustment switch are also #45 steel for excellent strength and durability. Chrome-plated metal handle overmolded, comfortable grip, uniform force, non-slip. Four additional caliper hangers are included to protect the brake fluid lines and calipers.

Product Type :Auto Part

Package Dimensions :12.7 Cm L X12.827 Cm W X2.032 Cm H

Country Of Origin :China

Package Dimensions: 9.8 L x 9.6 W x 5.8 H (centimetres)

Fits multiple makes and models (contact with your vehicle for fitment compatibility information)

Package Weight: 0.308 pounds

Product Type:Auto Part

Package Weight: 0.15 Pounds

Country Of Origin : China

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Manufactured to GM OE specification for fit, form, and function

Product Type:Auto Part

Package Weight: 0.251 Kilograms

Country Of Origin : China

Package Dimensions: 9.906 L X 5.842 H X 9.398 W (Centimeters)

Item Package Weight: 0.022 pounds

Country Of Origin: China

[3/8" Disc Brake Piston]: This cube brake piston tool used with a 3/8-inch square drive ratchet to rotate the piston back into the caliper

[Premium Material]: The brake piston cube is made of premium carbon steel; Anti-corrosion, sturdy, durable & longlasting

[Fitment]: This brake calliper adaptor is universally fit for most vehicles with 4 wheel 3/8" disc brakes

Raybestos Caliper Piston is designed to maximize performance and increase durability

This self-adjusting caliper piston features a corrosion resistant high-temperature synthetic lubricant and improves trouble-free operation

It improves braking and ensures safe, leak-free performance