Best Garbage Commander in 2026

Made in 2 pieces so arm swivels allowing cans to move smoothly without binding around curves

Simply hook 1 end to the front lift handle of the first can and the handle of the second, repeat for joining more cans in a chain

Heavy 11-gauge steel construction, laser-cut, formed for consistent quality then powder coated in a matte black finish for durability

Our UBL-MT can carrier can also be used as a bolt-on mounted hook as well as ball mounted

Single can units have a 12" support arm length, and hooks that lock the cans handle in place, adjustable from 9" to 10" inside widths to accommodate today's large wheeled containers. 64 or 96 gal.

The UBL-MT will raise the operating height 8" and extends it out an additional 8" beyond the attaching point of the towed vehicle

The Combo Hitch can be used as a haul pin hitch, on handled lawn and garden equipment, or even wheeled garbage cans

The most universal adaptor for lawn and garden as well as garbage cans

Quick installation, install and remove in seconds, lightweight at only 1 lbs.

The DR-MT is ideal for when you have two cans a week. If you have one or an odd number of cans we suggest using the SR-MT along with the Can Couplers.

Adjustable upright adds 2”, 4” & 6” of additional height above the receiver hitch, and extends out 8”

Double can unit’s support arm can be set for either 36” or 40” length, with over 12 different hook placements, to accommodate today's large wheeled containers. 64 or 96 gal.

Our UBL-BA can carrier can also be used as a bolt-on mounted hook as well as ball mounted

Ball mounts allow the cans to pivot smoothly around curvy driveways during transportation

The UBL-BA will raise the operating height 8" and extends it out an additional 8" beyond the attaching point of the towed vehicle

No hitch needed, works by hooking to the center latch on most cars and SUVs trunk latch

2 layers of padding protect car bumper, pad extends up to 29 inches

Hooks are 5 inches beyond the bumper and swivel allowing cans to go around curves without binding

Official Agency 6 Product

Fits 2" Receivers - Innovative block design has a working load limit of 13,000 lbs*. Fits all standard 2 inch receivers and 3/4 screw pin shackle rings. Shackle Block includes 2 pin mounting points for vertical block configuration and 1 pin mount hole for horizontal block configuration. *This assembly includes a shackle rated at 9,500 lbs. Do not exceed the lowest Working Load Limit (WLL) of any component (ex: vehicle, hitch receiver, etc)

Complete Assembly - Includes hitch pin and D-ring shackle. Everything you need for offroad recovery

DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 600 lbs. tongue weight, 7,500 lbs. weight distribution capacity and 750 lbs. weight distribution tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling

Custom designed to be compatible with factory bumper of 2007-2018 Jeep wrangler (Both 2 door & 4 door models.)

For Rubicon X & 10th Anniversary models reinstall using factory hardware

2 inch receiver with ratings of 3500 Lb Gross Trailer Weight; 350 Lb Tongue Weight.

★ PERFECT FITS 2" HITCH RECEIVERS - Lab Test at 41918lbs Max Breaking Strength - Over double the weight of standard truck

★ NEVER RUST - Double protection, Electro-galvanized and Powder coated, safty locked with LIBERRWAY Shackle hitch receiver, don't risk your life to connect you tow strap to 2'' ball.

★ DUAL HITCH PIN HOLES - Give you the flexibility to connect the shackle horizontally or vertically, can be connect your tow strap for Vehicle Recovery.

AMERICAN OWNED, FAMILY OPERATED - Join the Rhino Family & Support a USA based Father/Son Business!

DON'T RISK YOUR LIFE - Use a RHINO SHACKLE Instead of Connecting your Tow Strap to Hitch Ball

WE VALUE OUR CUSTOMERS - Your Time is Valuable, We've Made Installation Quick & Simple for you!

AMERICAN OWNED, FAMILY OPERATED - Join the Rhino Family & Support a USA based Father/Son Business!

DON'T RISK YOUR LIFE - Use a RHINO SHACKLE Instead of Connecting your Tow Strap to Hitch Ball

WE VALUE OUR CUSTOMERS - Your Time is Valuable, We've Made Installation Quick & Simple for you!

Custom designed to be compatible with factory bumper of 2007-2018 Jeep Wrangler JK (Both 2 door & 4 door models.) Not compatible with JL.

2 inch receiver with ratings of 3500 Lb Gross Trailer Weight; 350 Lb Tongue Weight.

Black powder coated for long lasting corrosion resistance.

STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories

HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength

REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar

Designed to complement today's trucks, vans and Sport utility vehicles, attach directly to the frame with no drilling or welding necessary

2 inch square receiver tube opening and solid all-welded Construction for maximum strength and durability

The A-Coat base with Black powder coat finish is resistant to adverse weather conditions and corrosion, ensures an attractive appearance for years to come

AMERICAN OWNED, FAMILY OPERATED - Join the Rhino Family & Support a USA based Father/Son Business!

20+ TON BREAK STRENGTH - Lab Tested and Certified 41,850lbs Capacity, #1 For Sale on Amazon!

POWDER COATED CHROMOLY STEEL - Sustain Good Looks & Anti-Rust Coating on ALL Rhino Products Guaranteed!

Custom designed to be compatible with factory bumper of 2018-2023 Jeep wrangler JL/JLU (Incl. 2020-23 diesel engine/21-23 4xe)

2 inch receiver with ratings of 3500 Lb Gross Trailer Weight; 350 Lb Tongue Weight.

Black powder coated for long lasting corrosion resistance.

★ PERFECT FITS 2" HITCH RECEIVERS - Lab Test at 41918lbs Max Breaking Strength - Over double the weight of standard truck

★ NEVER RUST - Double protection, Electro-galvanized and Powder coated, safty locked with LIBERRWAY Shackle hitch receiver, don't risk your life to connect you tow strap to 2'' ball.

★ DUAL HITCH PIN HOLES - Give you the flexibility to connect the shackle horizontally or vertically, can be connect your tow strap for Vehicle Recovery.

DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 900 lbs. tongue weight, 8,000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling

2" Receiver Tube Opening

No drilling required; Product does NOT include installation hardware.

Never exceed vehicle weight rating

DEPENDABLE STRENGTH. This trailer hitch is rated for 6,000 lbs. gross trailer weight, 600 lbs. tongue weight, 10,000 lbs. weight distribution capacity and 1,000 lbs. weight distribution tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.Drilling not required

FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling

DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing

COMPATIBILITY: Rear receiver hitch Compatible with 2007-2018 Jeep wrangler JK 2 door & 4 door (Excl. 2018 JL Models); NOTE: Wiring harness is NOT included

HUGE TOWING CAPACITY: This class 3 trailer hitch receiver is made from all-in-one, heavy duty thick tube for immense strength; Features 6,000lbs. gross trailer weight and 600lbs. tongue weight

EASY INSTALLATION: All mounting hardware is included; Comes with the hitch cover to protect the receiver tube from mud and dirt when not in use

ADD SPARE SPACE: This receiver hitch extender can extend to 7 inch length, add spare space between your bumper beam and your hitch mount bike rack or cargo carrier

RECEIVER SIZE: This trailer hitch extension bar has 2 inches by 2 inches industry-standard fit

HIGH STRENGTH: This 2 inch receiver tube is rated to tow up to 3500 lbs GTW and 350 lbs TW

COMPATIBILITY: Rear receiver hitch compatible with 2007-2018 Jeep wrangler JK 2 door & 4 door (NOT for JL Models)

HUGE TOWING CAPACITY: This trailer hitch receiver is made from all-in-one, heavy duty thick tube for immense strength; Features 3,500lbs. gross trailer weight and 350lbs. tongue weight

EASY INSTALLATION: All mounting hardware and plug & play wiring harness are included; Comes with the hitch cover to protect the receiver tube from mud and dirt when not in use

DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)

VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more

FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling

The RV Camper bumper hitch adapter 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.

Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.

The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.

COMPATIBILITY: Rear receiver hitch compatible with 2018-2022 Jeep Wrangler JL JLU 2 Door & 4 Door (Not for 2018 JK Models)

IMMENSE TOWING CAPACITY: OEDRO trailer hitch features 3,500lbs. towing capacity and 350lbs. tongue weight capacity

EASY to INSTALL: This towing hitch receiver requires no trimming or cutting of the rear bumper or fascia during installation and is the same as the production hitch (mounting bolts included)

2IN HITCH RECEIVER: With a 3,500 lb. towing capacity and a 350 lb. tongue weight, you'll be equipped for getting your gear to wherever the adventure is. Includes installation hardware & instructions.

TRAILER HITCH: Designed as a one-piece welded assembly for added strength, we've built our receiver hitch to match the towing capacity of your JK and to work with all factory equipment.

OFFROAD ACCESSORIES: Get serious about off-roading with a variety of tow hooks, hitches & kits that give yourself a way out in sticky situations. We offer steel winches, synthetic rope or steel cable & more recovery accessories.

VERSATILE ADAPTER. This trailer hitch adapter sleeve set easily inserts into your trailer hitch receiver whenever needed to adapt it from one size to another. This hitch adapter fits a 3-inch receiver and accepts a 2-1/2-inch shank.Fit Type: Universal Fit

STANDARD FIT. This trailer hitch receiver adapter set measures 3-inch x 3-inch to fit any industry-standard 3-inch trailer hitch receiver. It also accepts any industry-standard 2-1/2-inch or 2-inch shank

SOLID STRENGTH. This hitch receiver reducer adapter set is constructed from high-strength steel to ensure reliable towing for the road ahead. Its gross trailer weight ratings and tongue weight ratings are limited to the capacity of the trailer hitch