Best Geekstory in 2026

★【High Quality】：Resistance Tolerance: ±1%; Power: 1/4w. 1/4w metal film and thicker metal pins for better connection, low temperature coefficient and stable performance, which help you complete the electrical experiments faster and smoother

★【Applicable】：The resistor set can be applied to Arduino projects and other electronic and electrical experiments

★【Easy to Use】: Each ohm resistor is individually wrapped and the additional labeling of each variety guarantees you maximum convenience - no long searches necessary for easy organization without reading ribbons, and 20 pcs per plastic bag. Our different value resistor assortment kit will meet all your needs

BN-880 is suitable for Open source flight controller, not for flight control with SCM

Bn 880 gps module is dual module compass, with and electronic compass IC HMC5883L

Bn 880 gps module has flash to save configuration. So you do not need to reset next time when you use it

VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.

The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.

It is a magntized antenna,if get the GPS signal,please use the GPS module outdoor,If you want to use the GPS module indoor,please install GPS signal amplifier in your room

Voltage: 3.3-5V, Memory chips: AT24C32 (storage capacity 32K)

Clock chip: high-precision clock chip DS3231(there are 3 different chips for this clock module, DS3231N,DS3231SN and DS3231M, we send it by randomly.

About battery type: Battery is not included, you can use CR2032 or LIR2032 battery

With Center Frequency 1575.42MHZ

IPEX Connector

DC 3V - 5V voltage, 10mA power

Optical fingerprint sensor secure your project with biometrics. This fingerprint module can be used for fingerprint collection, fingerprint registration, fingerprint comparison and fingerprint search, it's easy to use, so its perfect for any project

Fingerprint sensor module can work with any microcontroller which with serial port: such as compatible with arduino, 51, avr, stm32, pic, arm, msp430

Package Includes:1 X Optical Fingerprint Reader Sensor, 2 X Cable. You can enroll new fingers directly - up to 240 finger prints can be stored

This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales

The sensor is a group of half-bridge strain gauge, there are 3 ways to use it

This module uses 24 high precision A/D converter chip hx711, specially designed for the high precision electronic scale

PACKAGE：You will get 2pcs BMP390 Sensor+4pcs SH1.0mm 4P Cable

HIGHLIGHT：The BMP390 has better precision than ever, which makes it excellent for environmental sensing or as a precision altimeter. It can even be used in either I2C and SPI configurations.

UPGRADE：It is is the upgrade to the BMP280 and BMP388 - with a low-altitude noise as low as 0.1m and the same fast conversion time.

This BE-180 GPS Module using the latest 10th generation chip When you use it for Raspberry Pi, there is no driver needed. Here is connection with RPi, red to 3.3v, black to gnd, green to txd, white to rxd.

The TX LED flash means gps module output normally. The PPS LED flash means gps module locate your place.

Data Level : TTL or RS-232, Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable.

BN-808 USB GPS Module support windows and linux system, not for android and IOS system.

BN-808 USB GPS receiver uses the latest eighth generation chip (M8030-KT). The Receiving Format: GPS, GLONASS, BDS, GALILEO, SBAS and QZSS. default GPS+GLONASS+SBAS+QZSS combined positioning. If you need high accuracy, it is recommended to use GPS+GLONASS+SBAS+QZSS+GALILEO or GPS+BDS+SBAS+QZSS+GALILEO combined positioning mode, and have 72 Searching Channel; Frequency: GPS L1，GLONASS L1，BeiDou B1，SBAS L1，Galileo E1

You need to install the driver to use BN-808 USB GPS Module on Windows system, but it is plug and play on Linux system

BS-708 USB GPS Module support windows and linux system, not for android and IOS system

BS-708's chip is G7020-KT. The Receiving Format: GPS,QZSS and SBAS, and have 56 Searching Channel; Data Level: Default USB level; Data Protocol: USB, TTL or RS232, Default NMEA-0183

You need to install the driver to use BS-708 USB GPS Module on Windows system, but it is plug and play on Linux system

VK-162 GPS support windows and linux system, not for android and IOS system. It is NOT plug and play for most device. You must install driver before make it work.

If you have any issue when using our product,or you need product use documentation, please click “Geekstory”, click “Ask a question” to em-ail us

You can get 2 x VK-162 GPS Receiver. The cable length is 190cm. The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.

Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.

±1% Tolerance range: Maintaining Sccuracy Over Time

Product: 1 ohm 1/2w (0.5watt) -100 pcs

Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.

±1% Tolerance range: Maintaining Sccuracy Over Time

Product: 120 ohm 1/4w (0.25watt) -100 pcs

BOJACK resistor assortment kit contains 1000pcs resistors with variety values. Enough quantity for your DIY project and experiments

These resistor kits including 25 different values: 1Ω，2.2Ω, 3.3Ω,4.7Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 120Ω, 150Ω, 220Ω, 330Ω, 470Ω, 1KΩ, 2KΩ, 2.2KΩ, 4.7KΩ,5.6KΩ, 7.5KΩ,10KΩ, 22KΩ, 47KΩ, 100KΩ,1MΩ, to fulfill your variety requirement

Upgrade version resistors with ±1% tolerance range, 1/2w film and thicker metal pins to have a better connection and stable performance features which help you finish the electrical experiments project faster and more smoothly

BOJACK resistor assortment kit contains 300 pcs resistors with variety values. Enough quantity for your DIY project and experiments

These resistor kits including 30 different values: 1Ω,2Ω,2.2Ω, 3.3Ω,4.7Ω,10Ω,22Ω,47Ω,68Ω,100Ω,120Ω, 150Ω, 220Ω, 330Ω, 470Ω, 560Ω, 1KΩ,2KΩ, 2.2KΩ, 4.7KΩ,5.6KΩ, 7.5KΩ,10KΩ,15KΩ, 22KΩ, 47KΩ, 100KΩ,220KΩ,470KΩ,1MΩ to fulfill your variety requirement

Upgrade version resistors with ±1% tolerance range, 2W film and thicker metal pins to have a better connection and stable performance features which help you finish the electrical experiments project faster and more smoothly

BOJACK resistor assortment kit contains 1000pcs resistors with variety values. Enough quantity for your DIY project and experiments

These resistor kits including 25 different values: 1Ω，2.2Ω, 3.3Ω,4.7Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 150Ω, 220Ω, 330Ω, 470Ω, 1KΩ, 1.5KΩ,2KΩ, 2.2KΩ, 4.7KΩ,5.6KΩ, 10KΩ, 15KΩ,22KΩ, 47KΩ, 100KΩ,1MΩ, to fulfill your variety requirement

Upgrade version resistors with ±5% tolerance range, 1/2w film and thicker metal pins to have a better connection and stable performance features which help you finish the electrical experiments project faster and more smoothly

More humanized design with 50 pcs frequently used resistors (100, 220, 1k, 10k Ohm) and 25 pcs seldom used resistors. Color Code Guide helps you read the resistance

Perfect pin (0.022 inches, 0.55mm), #24 lead SWG (Stand Wire Gauge), perfect for breadboard in electronic projects

±1% tolerance, 1/4w, metal film.

Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.

±1% Tolerance range: Maintaining Sccuracy Over Time

Product: 1K ohm 1/4w (0.25watt) -100 pcs

Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.

±1% Tolerance range: Maintaining Sccuracy Over Time

Product: 1K ohm 1/2w (0.5watt) -100 pcs

BOJACK resistor assortment kit contains 1000pcs resistors with variety values. Enough quantity for your DIY project and experiments

These resistor kits including 25 different values: 1Ω，2.2Ω, 3.3Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 120Ω, 150Ω, 220Ω, 330Ω, 470Ω, 560Ω, 680Ω, 1KΩ, 2KΩ, 2.2KΩ, 4.7KΩ,5.6KΩ, 10KΩ, 22KΩ, 47KΩ, 100KΩ,1MΩ, to fulfill your variety requirement

Upgrade version resistors with ±5% tolerance range, 1/4w film and thicker metal pins to have a better connection and stable performance features which help you finish the electrical experiments project faster and more smoothly

Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.

±1% Tolerance range: Maintaining Sccuracy Over Time

Product: 10K ohm 1/2w (0.5watt) -100 pcs

Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.

±1% Tolerance range: Maintaining Sccuracy Over Time

Product: 4.7K ohm 1/4w (0.25watt) -100 pcs

Metal Film Resistor: Excellent Noise Suppression, Moisture-Proof, High Temperature Resistance And Long Working Life.

±1% Tolerance range: Maintaining Sccuracy Over Time

Product: 100K ohm 1/4w (0.25watt) -100 pcs

☛Why Choose Us☚: 1. 0.5mm Fat Leg, Accurate for Breadboard 2. Clear Printed Resistance 3. Standard 5 Color Bands 4. Arranged Neatly to Avoid Bending 5. Much Better Performance than Carbon Equivalent

Power: 1/4 W Watt, Fix Resistance: 47Kohm, TOL: ±1%

Diameter: 2.3mm, Film Length : 6mm, Axial Leads End: 25mm, 100 pcs Pieces Single Fixed Resistor with Line

ALLECIN Resistors Assortment Kit contain 25 Different Values Aaxial-Lead Resistors with complete RoHS certification.

Features & Advantages : Excellent long-term stability, Perfect noise suppression, Good high-frequency characteristics, High Temperature Resistance & Long Working Life. The pulse load is stable and the adaptability to the pulse is good.

1/2W Carbon Film Resistor : 1Ω, 2.2Ω, 3.3Ω, 10Ω, 22Ω, 47Ω, 68Ω, 100Ω, 120Ω, 150Ω, 220Ω, 330Ω, 470Ω, 560Ω, 680Ω, 1KΩ, 2KΩ, 2.2KΩ, 4.7KΩ, 5.6KΩ, 10KΩ, 22KΩ, 47KΩ, 100KΩ,1MΩ with ±5% tolerance range.

☛Why Choose Us☚: 1. 0.5mm Fat Leg, Accurate for Breadboard 2. Clear Printed Resistance 3. Standard 5 Color Bands 4. Arranged Neatly to Avoid Bending 5. Much Better Performance than Carbon Equivalent

Power: 1/4 W Watt, Fix Resistance: 220ohm, TOL: ±1%

Diameter: 2.3mm, Film Length : 6mm, Axial Leads End: 25mm, 100 pcs Pieces Single Fixed Resistor with Line

☛Why Choose Us☚: 1. 0.5mm Fat Leg, Accurate for Breadboard 2. Clear Printed Resistance 3. Standard 5 Color Bands 4. Arranged Neatly to Avoid Bending 5. Much Better Performance than Carbon Equivalent

Power: 1/4 W Watt, Fix Resistance: 10Kohm, TOL: ±1%

Diameter: 2.3mm, Film Length : 6mm, Axial Leads End: 25mm, 100 pcs Pieces Single Fixed Resistor with Line

☛Why Choose Us☚: 1. 0.5mm Fat Leg, Accurate for Breadboard 2. Clear Printed Resistance 3. Standard 5 Color Bands 4. Arranged Neatly to Avoid Bending 5. Much Better Performance than Carbon Equivalent

Power: 1/4 W Watt, Fix Resistance: 330ohm, TOL: ±1%

Diameter: 2.3mm, Film Length : 6mm, Axial Leads End: 25mm, 100 pcs Pieces Single Fixed Resistor with Line

25 pcs each of the following standard values:0R,1R,1.2R,1.5R,1.8R,2R,2.2R,2.4R,2.7R,3R,3.3R,3.6R,3.9R,4.3R,4.7R,5.1R,5.6R,6.2R,6.8R,7.5R,8.2R,9.1R,10R,12R,15R,18R,20R,22R,24R,27R,30R,33R,36R,39R,43R,47R,51R,56R,62R,68R,75R,82R,91R,100R,120R,150R,180R,200R,220R,240R,270R,300R,330R,360R,390R,430R,470R,510R,560R,620R,680R,750R,820R,910R,1K,1.2K,1.5K,1.8K,2K,2.2K,2.4K,2.7K,3K,3.3K,3.6K,3.9K,4.3K,4.7K,5.1K,5.6K,6.2K,6.8K,7.5K,8.2K,9.1K,10K,12K,15K,18K,20K,22K,24K

,27K,30K,33K,36K,39K,43K,47K,51K,56K,62K,68K,75K,82K,91K,100K,120K,150K,180K,200K,220K,240K,270K,300K,330K,360K,390K,430K,470K,510K,560K,620K,680K,750K,820K,910K,1M,1.2M,1.5M,1.8M,2M,2.2M,4.7M,

You don't need to read color bands,Each value is individually labeled and packaged