Best General Wire in 2026

MULTIFUNCTION: With this multifunctional 3.5mm to male flash PC sync cable, you not only can attach the flash to the cameras Sync terminal/socket, but also can attach the flash receiver to the mololight.

COMPATIBILITY: The cable will work on most flashes that take a single pin plug.

CONNECTOR: 3.5mm Plug to Male Flash PC Sync Cord.

Us snap it on the tube, close the gate and turn in either direction

The cutter wheel is spring loaded to provide a constant cutting pressure, so you'll never accidentally crimp the tubing

The Auto Cut has long lasting hardened steel cutting wheels that are easy to replace when the time comes

General's water jets are ideal for clearing soft stoppages and ice from clogged drain lines

A removable 150 ft. Capacity hose Reel with Reel brake and swivel is mounted on a heavy-duty Frame with two 8 in. Semi-pneumatic Tires. Complete with tool box

Standard safety features include a thermal relief valve to protect the pump from heat damage, along with a back flow check valve and inlet filter. An optional spray wand is available

Power switch diaphragm, part number 136080, works on all general pipe cleaners electric floor ER207-E machines

Safe and reliable, easily installed

Made in the usa

Off camera multiple-flash photography

TTL multiple flash system

Perfectly exposed pictures

MULTIFUNCTION: With this multifunctional 3.5mm to male flash PC sync cable, you not only can attach the flash to the cameras Sync terminal/socket, but also can attach the flash receiver to the mololight.

COMPATIBILITY: The cable will work on most flashes that take a single pin plug.

CONNECTOR: 3.5mm Plug to Male Flash PC Sync Cord.

Nikon SC-29 TTL Off-Camera Shoe Cord with AF Assist - Coiled

No deductibles or hidden fees

Free ground shipping on all repairs

High grade copper wire and silver plated connectors

Designed for very fast signal transfer rate

Professional High Quality spring PC sync cable

4.2'/1.3m heavy-duty coiled cable

Features a shoe mount on the bottom of the flash connection shoe, as well as a 1/4"-20 socket

Features a built-in tripod socket at the other end where the Speedlite unit is attached to which permits to be locked onto a tripod & frees your hand from holding the off-camera flash

Compatibility: The TTL Cord for Canon for Canon R5 R6 RP R T8i T7 T7i T6 T6i T6s T5 T5i SL3 SL2 90D 80D 77D 7D 6D 5D M50 Mark II M6 Mark II M5 can be used to replace Canon OC-E3 cord. Please check the following description for flash models

NOTE: It’s fit for most Canon cameras and flashes except D2000, EOS 630 RT M10 and some flashes

A shoe mount on the bottom of flash connection shoe and a 1/4"-20 threaded Studs, allowing you mount it onto flash bracket and tripod with 1/4"-20 threaded Studs. 1.3m coiled cord design ensure you to be convenient for shooting

Six-meter-long extension cable compatible with Zoom F8, H5, H6, and Q8 Recorders

Built-in three-prong action mount

Included hot shoe adapter

For Nikon Speedlights with TTL / i-TTL Hot Shoe | Maintains Full TTL Connection

20-inch Coiled Cord Expands to 50" When Stretched | Mounts to Flash Shoe & 1/4"-20 Threaded Studs

Bonus "Neat Strap" included which keeps cord out of the way

Compatible with Canon E-TTL / E-TTL II | Straight Cord

Mounts to Flash Shoe | Mounts to 1/4"-20 Threaded Studs

Allows Off-Camera Triggering of Flash

MULTIFUNCTION: With this multifunctional 2.5mm to male flash PC sync cable, you not only can attach the flash to the cameras Sync terminal/socket, but also can attach the flash receiver to the mololight.

COMPATIBILITY: The cable will work on most flashes that take a single pin plug.

CONNECTOR: 2.5mm Plug to Male Flash PC Sync Cord.

Godox EC200 for AD200/AD200Pro Extension Head with 2M Long Cable, Easily Hold the Flash Head in Outdoor

The Godox EC200 Provides A Metal Cold Shoe with Locking Ring, and A Standard 1/4″ 20 Threaded Mounting Hole in the Base

Godox EC200 Could be Mounted on A Bracket Above or Beside the Camera. Fully Compactible with AD200 Bare Bulbs Head and Speedlite Head Functions

RF-603II adopts a global free FSK 2.4GHz wireless channel which can be suitable in many countries.

Within capacious areas, the remote control distance may reach to 100m and suitable for RF-603I.

This wireless flash trigger kit is formed by two same transceivers. It can be set to single transmit state (TX), which will be more convenient for testing flash, and can be set to transceiver state (TRX), automatically switch transmit and receive state, adopts 2 levers button design, it will realize the awakening, flash testing, focus and shutter function in "TX" and "TRX" state respectively.

Compatible with Olympus cameras with UC1 type remote port. Supported cameras include Olympus E-30, E-410, E-420, E-450, E-510, E-520, E-600, E-620, Evolt E-410, E-400, Evolt E-510, OM-D E-M5, PEN E-P1, E-P2, E-P3, E-PL2, E-PL3, E-PL5, E-PM1, SP-550, SP-560, SP-570, XZ-1.

Suitable for Pixel IR-231, RW-221, TW-282, TC-252, TF-36x Pawn trigger, TF-37x Soldier trigger.

It's compatible with Triggertrap dongle (V1, V2)

With tripod screw hole

Country of Origin: Japan

Compatible with Nikon TTL/i-TTL

Straight Cord

Mounts to Flash Shoe

Compatible with Sony ADI / P-TT

Coiled Cord

Mounts to Flash Shoe

Compatible with Sony ADI / P-TTL

Straight Cord

Mounts to Flash Shoe

Premium Grade, Made in Korea, Heavy Duty Built with Metal Reinforcement, and Metal Hot-shoe

2.4 GHz with 16 Channels, and 700ft range

Max Sync Speed 1/250s, Powered by 1x CR2450 Lithium Battery (Included).

★HIGHLIGHTS - Features a flash connector and a camera connector at the ends, allows the flash to be removed from the camera's hot shoe for creative unique and dramatic lighting, reduces the harsh shadows commonly encountered with direct on-camera flashes.

★SHOE MOUNT WITH 1/4"-20 SOCKET - Features a built-in 1/4"-20 tripod socket at the other end where the Speedlite unit is attached to which permits to be locked onto a tripod or flash shoe mount, frees your hand from holding the off-camera flash.

★CAMERA COMPATIBILITY - Compatible with Sony Camera with Multi Interface Shoe, such as Sony Alpha 7R IV, 7RIV, α7R IV, A9, A7, A7R, A7S, A7SII, A7SIII, A7II, A7III, A7RII, A7RIII, A7RMII, A7RM2, A7RM3, A6600, A6500, A6400, A6300, A6100, A6000, A99 II, A977 II, RX10 IV, RX10 III, RX1R II and more.

✔ Maintains full TTL, i-TTL and manual control, 6.5' (2 m) coiled cord

✔ Mounts to flash shoe , mounts to 1/4"-20 threaded studs, the cord comes with a cold shoe locking ring and light stand lug for use with other lighting accessories

✔ Reduce harsh shadows, the flash cord is ideal for use in a secure, studio environment or on-location shoots

Adopting quality plastic material, this product is soft and durable for long term use.

This flash sync cable provides a stable connection for your flash triggers.

3.5 mm jack plug to male flash PC sync with screw lock to provide a stable PC connection.

3.5mm male to 6.35mm male directly connect camera and flash connect flashing line.

Good contact performance, quick response of the electrode.

Plug and play, simple and convenient.

Compatibility: The TTL Cord for Nikon Z5, Z6, Z6 II, Z7, Z7 II, D7500, D7200, D5600, D5500, D5300, D5000, D3500, D3400, D3300, D3200, D850, D810, D780, D750, D700, D500, D5, D6 can be used to replace Nikon SC-28

Flashes: It fits for Nikon SB-5000, SB-800, SB-910, SB-900, SB-800, SB-700, SB-600, SB-400, SB-80DX, SB-28DX, SB-28, SB-27, SB-26, SB-25, SB-24, SB-22 and other brands of flashes work for Nikon TTL

A shoe mount on the bottom of flash connection shoe and a 1/4"-20 threaded Studs, allowing you mount it onto flash bracket and tripod with 1/4"-20 threaded Studs. 1.3m coiled cord design ensure you to be convenient for shooting

For Good Flashing Effects----High quality professional flash sync cable links between camera and flash trigger for good flashing effects

Flash sync cable integrated the camera flashing and environmental light

Can be Locked----Flash sync cable integrated the camera flashing and environmental light. With screw on locks, the cable can be locked with the PC socket of the camera

The length is 30cm (12inch), male to male PC sync cord.

If the camera does not have a PC port, please use a 'hot shoe to PC' adapter to transform.

The length is 30cm (12inch), male to male PC sync cord.