Best Genuine Dexter in 2026

Fits Dexter 3.5K Axles with Electric Brakes

Kit Includes 1 Left-hand & 1 Right-hand to Service 1 Axle

Size: 10"x2-1/4"

【GOOD SEAL】- These glad hand gaskets are fine workmanship, soft touch and smooth surface, provide good seal and compatibility. Each seal is perfect for all standard glad hands. And our seals with a tapered base for easy installation, just insert the bottom part to the glad hand. Perfect for your truck.

【LONG SERVICE LIFE】- These glad hand o rings are made of high quality rubber. They're durable, good elasticity, high toughness, good torsion and tear resistance, resist oils, chemicals and water. the o-rings have good aging resistance, work well under long-term weather changes.

【20 PIECES PACK】- Glad hand seals bulk, they are packed in a fine bag. Abundant quantity can meet various use and replacement requirements in your daily work, and you can also share them with others. Carry seals with the vehicle and replace them immediately when necessary.

【GOOD SEAL】- These glad hand gaskets are fine workmanship, soft touch and smooth surface, provide good seal and compatibility. Each seal is perfect for all standard glad hands. And our seals with a tapered base for easy installation, just insert the bottom part to the glad hand. Perfect for your truck.

【LONG SERVICE LIFE】- These glad hand o rings are made of high quality rubber. They're durable, good elasticity, high toughness, good torsion and tear resistance, resist oils, chemicals and water. the o-rings have good aging resistance, work well under long-term weather changes.

【55 PIECES PACK】- Glad hand seals bulk, they are packed in a fine bag. Abundant quantity can meet various use and replacement requirements in your daily work, and you can also share them with others. Carry seals with the vehicle and replace them immediately when necessary.

Pair of 12" x 2" TruRyde electric brake assemblies with parts

5 Hole Mounting. Comes with mounting bolts, nuts, and lock washers

Works with 5,200 lbs., 6,000 lbs., and 7,000 lbs. Al-Ko, Dexter, Lippert and Quality Trailer Axles

For use on trailers with an existing electric brake system

Activates trailers brakes upon separation from tow vehicle to ensure a safe stop of the trailer

Push to Test: LED's indicate fully charged, charging or (needs) recharge

Pair of 10" x 2.25" TruRdye electric trailer brake assemblies with parts.

4 Hole mounting, comes with mounting bolts, nuts, and lock washers

For Alko, Dexter, Quality, or other popular trailer axle manufacturers.

Dexter Style Backing Plate

Axle Size - 5200-7000lb

Brake Flange - 5 Bolt

Fits Dexter 3.5K Axles with Electric Brakes

Kit Includes 1 Left-hand & 1 Right-hand to Service 1 Axle

Size: 10"x2-1/4"

Use high quality aluminum and coated with paint to prevent them from rusting.And the use of high quality rubber.It can prevent air leakage efficiently.Such the gladhand of the intensity of anti-aging is very strong, be able to withstand long-term weather.

Dimension:105 x 56mm / 4.1 inch x 2.2 inch ,please check the image.

Connect size:1/2 inch FPT port.

<p> 🚚<b>DURABLE HIGH QUALITY MATERIAL</b>: Airline glad hands with high hardness steel plate with Grade 12.9; Anti rusting plated bolt with G5 Grade; Aluminum body in 6061 for long lasting; Meet or Exceeds SAE J318 standard for Automotive Air Brake Line;<br><br></p>

<p>🚚<b>NO LEAK THREADING & WITH EXTRA 2 REPLACE SEALS</b>: Leakage brings most frequent trouble for truck drivers. We have improved our manufacturing process for applying extra thread glue on the male thread of the hex handles.Beside using the durable rubber material of the glad hand seals, we also put extra 2 piece original gaskets in the pack to ensure longer working life of the glad hand. Truck drivers could replace it by hand in emergency case.</p>

<p>🚚<b>REPLACEMENT PART NUMBERS</b>: Fit most offroad trucks,trailers,semi trailers,freightliners, volvo vnl tractors, peterbilt accessories, cascadia truck.such cross refenence numbers as Velvac 035042/035045, Bendix 278850/278851, BWP M313C, Tramec 362012,Tectran 1011EF/1011SF, GLOBETECH GT-5331, HEBCO 441016, Vipar 079851, and etc.</p>

Package Dimensions: 1.016 cms (L) x 12.7 cms (W) x 13.208 cms (H)

Product Type: Auto Part

Package Quantity: 1

EASY TO INSTALL — With no actuator or hydraulic lines, installation is easier than hydraulic brakes. Electric actuator (sold separately)

SELF-ADJUSTING — Brakes self-adjust during every forward stop, providing up to 50 percent better braking distance

MULTIPLE OPTIONS - Available in left hand (road side) and right hand (curb side) and multiple wheel sizes and axle ratings

3 Year Limited Consumer Warrant

Made in USA with some imported components

Bed size: 32.5"W x 49"L x 12" H

Pair of TruRyde 12" x 2" 8-6.5" bolt circle hub and drums 25580 inner bearing 14125A outer bearing

Pair of TruRyde 12" x 2" self adjusting electric backing plates

Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.

【HEAVY DUTY ANTI-SKID HANDLES】- Our handles weighs 476g, others usually only 357g. Our handles are more durable and not easy to break. Our wide hex handles provide better grip than the small cylindrical, and provide greater leverage for ease of coupling/uncoupling air lines.

【NO-LEAK】- High hardness steel clamp plates, port thread machined by lathe, smoother. Leak proof gum on the handle thread. They ensure that glad hands are tightly connected under strong air pressure. Gaskets are made of high-quality rubber, the aging resistance is very strong, prevent air leakage efficiently. Gladhands kit is color coded red & blue for easy identification.

【WITH 2 EXTRA SEALS】- Leakage is usually caused by the wear of rubber. The extra washers keep the glad hands in excellent working condition. This is a very cost-effective solution.

Dexter Style Self Adjusting Backing Plate

Axle Size - 5200-7000lb

Brake Flange - 5 Bolt

One New 12" X 2" Trailer Brake Drum Kit 8 on 6.5" B.C. for 7000 Lbs Axl

Bolt pattern: 8 on 6.5" 8 x 1/2"-20 studs installed 2 x bearing races installed

Kit also include: 25580 inner cone bearing and 14125A outer cone bearing, Grease seal 2.25" x 3.371" seals, EZ lube grease cap with rubber plug, 8 cone wheel nuts, 1/2" - 20 thread

Premium LIBRA brand OE 10" x 2-1/4" electric trailer brake assemblies (1 left + 1 right) for one axle

works with most 3,500 lbs trailer axles in the market

Center Hole Diameter: 3", 4 holes mounting, bolt circle diameter: 4", mounting bolts installed, no nuts included

Your purchase includes One Agri-Fab 44-Inch Lawn Sweeper, 45-0492 model

Lawn Sweeper dimensions: 78” L x 55” W x 52” H | Carton Dimensions: 54.1” L x 18” W x 19.5” H | Brush to Wheel ratio: 5.6:1 | Hooper Capacity: 25 Cu. Ft. | Wheel dimensions: 12” x 3” | Wheel type: Semi-pneumatic | Pallet Qty.: 8 | Weight: 95 lbs

Height adjustment lever with easy to use indicator will never slip and assures optimum performance

Dexter Style Backing Plate

Axle Size - 3500lb

Dexter Style Backing Plate

EASY TO INSTALL — With no actuator or hydraulic lines, installation is easier than hydraulic brakes. Electric actuator (sold separately)

SELF-ADJUSTING — Brakes self-adjust during every forward stop, providing up to 50 percent better braking distance

MULTIPLE OPTIONS - Available in left hand (road side) and right hand (curb side) and multiple wheel sizes and axle ratings

Pair of TruRyde 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud)

Pair of TruRyde 10" x 2 1/4" self adjusting TruRyde electric backing plates

Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles

EASY TO INSTALL — With no actuator or hydraulic lines, installation is easier than hydraulic brakes. Electric actuator (sold separately).Fit Type: Universal Fit

SELF-ADJUSTING — Brakes self-adjust during every forward stop, providing up to 50 percent better braking distance

MULTIPLE OPTIONS - Available in left hand (road side) and right hand (curb side) and multiple wheel sizes and axle ratings

TruRyde Pair of 10" x 2 1/4" self-adjusting electric brake assemblies

4 Hole Mounting for 3,500 lbs. trailer axle. Comes with mounting nuts, and lock washers

Contains 1 left and 1 right brake assembly.

Pair of 10" x 2 1/4" 5-4.5" bolt circle TruRyde hub and drums with parts (2 5/8" from center of one stud to the center of the next stud)

Pair of 10" x 2 1/4" TruRyde electric backing plates

Works with Al-Ko, Dexter, Lippert, and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory.

2-Pack of TruRyde 12" x 2" self-adjusting electric brake assemblies. Contains 2 left and 2 right brake assembly.

5 Hole mounting for 5,200 lbs., 6,000 lbs., and 7,000 lbs. trailer axles.

Comes with mounting bolts, nuts, and lock washers

2 x trailer 5 on 4.5" hub drum kits + 2 x 10"x2-1/4" electric brakes for Dexter and other brands 3,500 lbs trailer axle

Drum Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed, Ref part #. 008-247-05, 84546

Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719" x 2.565", 2x E Z lube grease caps with rubber plug; 10 cone wheel nuts 1/2"-20 thread

Reinforced double layer standard air brake coils

Color-coded set: Includes both BLUE - Service and RED - Emergency coils

Working Length: 15' Leads 2 x 12" Meets SAE J844 and DOT FMVSS 106 Both lines are rated to -65F (-55C)

【INCLUDE】: 1 of Service Air Line and 1 of Emergency Air Line; 1 of ABS rated power line in green, 1 bracket mounting hanger to hold the 3 cables together and for easy hanging by spring tender kit (sping tender not included), 1 spiral wrapped for a clean and safety organization; Total length = 12ft

【REPLACE】: Could be used most freightliner trailer trucks, some cross reference number as follows: 42045656, 30-2151 302151, 169127, 13000, 451097, 6814.

【EXTRA 10 PIECE GLAD HAND SEALS】: 10 Extra glad hand seals were included in the package. Those are high quality silicone rubber mater with good elasticity, long duribilities, easy to replace the original ones in the glad hands. Glad hands seals are very important for good sealing for the whole 3 in 1 airline system and should be replaced frequently during driving.