Best Gliston in 2026

After Our Several Tests,These Glue Sticks's Best Melt Time is 5-8 Minutes for 100w Glue Gun, Adhesive Cooling Time about 2 Minutes is the best Working Time for Car Dent Repair

Black Color Glue Sticks is Suit for Relatively Soft on Car,Some Parts More Harder Please Choose Yellow Color Glue Sticks

Glue Sticks is the Standard Size ,Suit for all Standard Glue Gun

PRO 2 in 1 SLIDE HAMMER: Long T dent remover tool is a labor-saving pulling mode via slide hammer hit to repair dents of all sizes with perfect effect and high efficiency. Short T tool is a strenuous pulling mode which repairs the dents of all sizes by your own strength, the effect is simple and quick. You will have different DIY auto body dent removal experiences.

HIGH QUALITY MATERIAL: T bar slide hammer dent puller made from tempered high carbon stainless steels and standard stainless steel. The 16 pure black glue tabs are all made of high-reliability plastic and they are thickened and widened. So this paintless dent kit will very durable and no worried it break.

EASY to OPERATION: Most of the dent remover can be finished in half hour, it can save your much money and time, in addition, the auto body dent repair set can be used unlimited time. The paintless dent repair kit is great for any person to operate, even the girl can easily repair.

Widely Used: Paintless Dent Puller Kit can be used for the car dent and any other metal surface like refrigerator, washing machine, etc.(Tip: Not suitable for creases or corners dent).

Professional Dent Repair Kit: The Golden dent lifter specifically designed can adjust more 1 cm height and more 3.8cm width both for small dent and big dent , 21pcs different shape and size pulling tabs which are made by PA materials supplied for fixing various shapes of dents.

Easy to use: Dent Removal Kit lets you repair the dents anywhere anytime by your self,since the accessories of Paintless Dent Repair are not complicated at all.Only three steps then you can repair a dent. Step 1: Place the tab which full with glue in the dent. Step 2: Use the dent lifter to pull the dent out. Step 3: Remove glue by alcohol and plastic shovel. Support one-handed operation, suitable for repairing small dents.

Gorilla All Weather Waterproof Duct Tape is designed for outdoor repairs that need to stand up to extreme weather conditions with a permanent bond

Made with an incredibly strong, permanent, butyl adhesive and a weather resistant shell, this tape withstands even extreme weather conditions

Works in hot and cold temperatures with a service temperature range of -40° F to 200° F; Application temperature above 40° F

Plasticbonder: Is A Quick-Set, 2 Part, Urethane Adhesive System That Provides Strong, Lasting Repairs And Works On Thermoset, Carbon Fiber Composites, Thermoplastics, Coated Metals, Concrete & More.

Count On Us: For More Than 40 Years, Our Products Have Earned A Loyal Following From People Who Take Pride In Their Work. With Each Product We Innovate, We Continue To Provide The World'S Strongest Bond For Your Projects.

Simple To Use: J-B Plasticbonder Has A 1:1 Mixing Ratio, Sets In 15 Minutes And Can Be Sanded After 30 Minutes. With A Tensile Strength Of 3770 Psi, Plasticbonder Cures To A Hard, Permanent Bond.

PERMANENT PRO RESULTS: Permanently attaches side moldings, trim and emblems to the interior and exterior of vehicles

WEATHERABLE: High strength double-sided adhesive withstands weather and impact. Temperature use range is -40F to 250F

EASY TO USE: Cut, apply, press. That's it. No tools required. Avoid mess of liquid adhesives

PERMANENT: Creates a permanent bond that instantly seals out air, water, and moisture.

INDOOR / OUTDOOR USE: Gorilla Waterproof Patch & Seal tape works great on indoor and outdoors repairs and even under water.

EXTRA THICK: Has an extra thick adhesive layer and UV resistant backing.

STRONG SUCTION FORCE - This dent puller kit's maximum horizontal suction is 130 lbs, and the maximum vertical suction is 80 lbs.

PREMIUM MATERIAL - The handle of the suction cup dent puller is made of solid ABS which has extremely hardness, is welded to the sucker so firmly that the handle will not break easily, is solid and durable, has a long service time. The soft rubber pad is gentle on dent surfaces and won’t scratch the paint.

EASY TO USE - Clean and heat the dent with hot water, start operation from the shallow concave line then press hard and make sure the suction cup fits seamlessly, gently pull the suction cup up by using the handle, the dent surface will be pulled up with the dent puller.

PERMANENT: Creates a permanent bond that instantly seals out air, water, and moisture.

INDOOR / OUTDOOR USE: Gorilla Waterproof Patch & Seal tape works great on indoor and outdoors repairs and even under water.

EXTRA THICK: Has an extra thick adhesive layer and UV resistant backing.

PROFESSIONAL GRADE: Recommended by many OEMs

TWO-PART EPOXY ADHESIVE: Provides extended work-time or rapidly cured with heat

EXCELLENT ADHESION: For use on a wide variety of plastic and metal substrates

PROFESSIONAL GRADE: Recommended by many OEMs

TWO-PART EPOXY ADHESIVE: Provides extended work-time or rapidly cured with heat

EXCELLENT ADHESION: For use on a wide variety of plastic and metal substrates

Use to replace rotted or chipped away wood; cracks and other cosmetic defects in window and door sills, frames, railings, furniture, etc.

Features a convenient 1:1 mixing ratio, resin and hardener are easily mixed by hand

Will not shrink or become brittle after curing

Accelerates Body Repair: One of your body repair tools designed to speed up repairs

Body Fillers Addition: A necessary part of your car care kit for better hardening results

Finishing Putties Addition: Can be mixed with finishing putties to deliver a long-lasting repair

CURES FAST One-part adhesive sealant requires no mixing, typically cures in as little as 24 hours so you can get back on the water faster

SEALS ABOVE AND BELOW WATERLINE – Ideal for joints, rub-rails, access plates and other areas shielded from the sun

LONG LASTING FORMULA Tough polyurethane polymer resists weathering and salt water

DURABLE YET FLEXIBLE: For automotive plastic panel repair and for matching OEM seam sealers

TWO-PART EPOXY: Adhesive is automatically metered for proper ratio

EASILY SANDABLE: Ready to sand in 15 minutes for a smooth finish without rework

3" Custom Shop Spreader, 50 Pack

Flexible Spreaders / Squeegee for easy autobody filler application

Tool for applying fillers, putties, glazes, and caulks

3" Custom Shop Spreader, 10 Pack

Flexible spreader / Squeegee for easy autobody filler application

Tool for applying fillers, putties, glazes, and caulks

Kit includes re-usable body filler mixing board

1 each 4", 5" & 6" Spreaders

1 each gallon size goop scoop for scooping out body filler from can and for scraping sides of can to get it all out

6" Custom Shop Spreader, 50 Pack

Flexible spreader for easy autobody filler application

Tool for applying fillers, putties, glazes, and caulks

DESIGNED SPECIFICALLY for spreading filler, putty, spackle, caulk or glaze

THREE SIZES in each pack ensures that you'll always have the right size filler spreader to create your best work in auto body repair

3-PACK features 3" X 4", 3" X 5", and 3" X 6" size spreaders

USE WITH Bondo Fiberglass Resin for strong waterproof repairs

USE TO REPAIR holes or cracks in fiberglass, wood and metal

CLOTH PATTERN provides reinforcement for a strong repair

[QUICK FIX] - The K Tool International Q bond adhesive comes with 2 Q bond adhesive bottles, 1 plastic adhesive powder and 1 metal adhesive powder. Adhesive forms to rock solid form within 10 secs after application.

[REINFORCING POWDER-PLASTIC] - The reinforcing plastic powder(black lid) is used most commonly for Bumpers, Grills, radiators and many more.

[REINFORCING POWDER-METAL] - The reinforcing metal powder is used most commonly for any aluminum adn metal surfaces along with grey plastics.

5" Custom Shop Spreader, 10 Pack

Flexible Spreader / Squeegee for easy autobody filler application

Tool for applying fillers, putties, glazes, and caulks

【Easy To Use】Car dent removal tool is the ideal tool for moving flat objects in any home garage or professional body shop; Just put the car dent puller suction cup on a object surface and pull the handle up, so easily repaired car dent; If the dent is large, using two dent puller at the same time may be more effective

【Widely Application】: The suction cup is a great car dent removal tool;In addition,this suction cup dent puller is good at moving furniture, glass, tile, etc;And it can be used as the door/window handle, cell phone holder, and so on

【High Quality】The car dent puller are made of durable ABS material,durable natural rubber and strong metal core;Dent removal kit thickened natural rubber on the bottom to provides strong suction and seamless; The soft rubber pad is gentle on surfaces and won’t scratch the paint

PREMIUM MATERIAL:The handle of the suction cup dent puller is made of solid ABS which has extremely hardness, is welded to the sucker so firmly that the handle will not break easily, is solid and durable, has a long service time.The soft rubber pad is gentle on dent surfaces and won’t scratch the paint.

STRONG SUCTION FORCE:This dent puller kit's maximum horizontal suction is 140 lbs,and the maximum vertical suction is 90 lbs.

Unique design:Paintless dent repair kit is ergonomically designed and has the convenience of single stroke pump operation. One hand buckle design,precise structure, the pull strong and lasting, not easy deformation.

DO-IT-YOURSELF auto repair kit fixes dents, dings, deep scratches and more

KIT CONTAINS Cream Hardener, a Self-Adhesive Metal Body Patch, a spreader and the original Bondo Body Filler

SPREADS EASILY, cures in just 20 minutes so that it can be sanded and painted

EASY DO-IT-YOURSELF KIT to repair holes and scratches on automobiles, boats and more

100% WATERPROOF seal for long-lasting, durable repairs

STRONG AND VERSATILE FORMULA for multiple surfaces including concrete, wood, fiberglass, and metal

Damplifier Butyl Sealant Tape is a premium grade, butyl rubber sealant tape that is pliable, sticky, and tough enough for any project. This putty tape is double sided to flexibly seal a variety of gaps.

This sound deadening tape belongs in your tool box. Waterproof, chemical resistant, temperature resistant to 200°F, very pliable to flatten or stretch – often preferred over caulk, glue, or other sealant tape.

At 1/2” wide and 1/4" thick, Damplifier putty tape will seal thicker gaps, but is flexible to flatten out as thin as you want. Clean surface before applying. Adheres to metal, wood, glass, and masonry.

Dura-Gold premium black dry guide coat cartridge with applicator pad kit. Extra-large 7 ounce (200 grams) size. Several times more guide powder than other brands contain.

Instantly identify scratches, body filler pinholes, and other surface defects. Saves time and labor by preventing over-sanding and minimizing the re-work of a repair.

No aerosols, no solvents, no over-spray, and no masking. Dry guide coat works by giving a black contrast to the surface which identifies any defects, and the defects only will be removed during the sanding process. Dry guide coat works with either wet or dry sanding methods.