Best Gm Genuine Parts in 2026

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)

GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors

GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

Repair leaking A/C system, restore A/C function

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional

GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle

Briggs & Stratton 395051R

Bulk 25-feet

7/16-inch outer-diameter by 1/4-inch inner-diameter

Replaces Briggs & Stratton Service Part #283207 (Fuel Hose), and #95162S (Clamps)

Genuine Briggs & Stratton Part

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

¼ inch inside diameter (.64 CM) and ½ inch outside diameter (1.27)

Custom Extra long 6 Foot Length (1.82) can be cut to size for all your applications

Net Weight: 8oz (227g) per cartridge

Height: 7. 25” Diameter: 2. 6”

Cartridge has a Notched Collar providing easier alignment in portable gas burners!

ID: 3/8inch (10mm),OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi. Burst Pressure: 1160psi. Temperature Range: -40°F to 257°F. Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/Oil/grease/water and air,etc.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 11.12 mm (0.44 inch), Outer Diameter: 17.2 mm (0.68 inch)

Working Temperature: -40°F to +300°F

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 5.56 mm (0.22 inch), Outer Diameter: 11.17 mm (0.44 inch)

Working Temperature: -40°F to +300°F

ID: 1/2inch (13mm);OD: 0.75inch(19mm).Material: NBR.

Working Pressure: 217psi.Max Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 4.7inch(120mm).

Applicable Medium: 1/2 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

For selected engines that contain a fuel see-through fuel filter design Designed to exact OEM standards, Manufactured and tested to help deliver optimum performance

ID: 3/8inch (10mm);OD: 2/3inch(17mm).Material: NBR.

Working Pressure: 300psi.Burst Pressure: 1160psi.Temperature Range: -40°F to 257°F.Minimum Bend Radius: 3.9inch(100mm).

Applicable Medium: 3/8 id fuel line can work with diesel/biodiesel/gasoline/oil/grease/water and air,etc.

25 Feet of multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line

Can be used with unleaded gasoline, diesel fuel, gasoline blends of ethanol (E-10), E-85 and sour gas

Inner Diameter (ID): 5/16" (.3125") | Outer Diameter (OD): .56"

ID: 5/16". OD: 0.43inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000 psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID: 13/32". OD: 0.543inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

ID:5/16". OD:0.465inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 3000psi. Bursting pressure: 10000psi.AN6 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium: 6AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc

Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch)

Working Temperature: -40°F to +300°F

Resistant to 180 degree heat.

Resistant to oil and gas.

Adhesives & Sealants

Country of manufacture: United States

Manufacturer: Rectorseal

ID: 3/8 inch, OD: 5/8 inch, 6 AN NBR liner hose fuel injection 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 6Mpa, Handles temperature ranges of -40 to +275 degrees F

【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!

【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.

Formulated to begin working on contact to lift and remove unsightly grime, yellowing and waterline stains

Very effective at removing rust stains or leaf stains from fiberglass or painted surfaces

Will not harm the surface being cleaned and is an ideal preparation for polishing the hull

The more an engine is driven, the more carbon deposits can build up on fuel injectors, intake valves and ports

Gumout High Mileage Fuel Injector Cleaner is specially formulated to remove carbon deposits from engines with more than 75,000 miles

Cleans fuel injectors, intake valves and ports to restore performance, fuel economy and prevents future carbon build-up, which reduces emissions

Assortment and Functional: 4 different sizes fuel hose, I.D. x O.D.- 0.08" x 0.14", 3/32" x 3/16", 1/8" x 3/16", 1/8" x 1/4". Versatility small diameter hoses, multiple sizes, more alternative.

Wide Use Parts: For Poulan, Craftman, STIHL, Husqvarna 2 cycle small engine fuel Line. Used on chainsaw / string trimmer / blower / weedeater / weed whackers and more.

Quality Material: Excellent and durability tygon petrol fuel line, resist oil and gas, fearless against corrosion, swelling, hardening and low temperature, essential for small engine repair.

ALL-IN-ONE FUEL: Ditch the gels, bars, chews, and pills and go all day with just Tailwind. Tailwind mixes with water to meet your calorie, hydration, and electrolyte needs, no matter how big a day’s in front of you.

NO GUT BOMBS: Sipping Tailwind provides steady, small doses of fuel that pass right through the stomach. The composition of Tailwind’s fuel matches what the gut is made to absorb, so Tailwind enters your system quickly, without taxing the digestive tract and causing stomach issues.

TASTY ALL DAY: If you don't like the taste, you won't drink it. That's why Tailwind has light, clean flavors that taste better the longer you go.

[Size] ID of 10an fuel hose:0.56"(14.22mm),OD:0.78"(19.8mm). Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F(-40°C to 125°C); Min bending radius:101.6mm.

[Application] 10AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel, etc.

Package includes the following 4 different size fuel line hose,Please undetand that there maybe 1-3 cm dimensional deviation due to manual measurement.

The Size of small engine fuel lines: I.D. x O.D: .080" x .14", overall length: 4 feet; I.D. x O.D: 3/32" x 3/16", overall length: 4 feet; I.D. x O.D: 1/8" x 3/16", overall length: 4 feet;I.D. x O.D: 1/8" x 1/4", overall length: 4 feet.

Fuel lines will degrade over time and these replacements are perfect for bringing your small engines back to life.High-quality petrol fuel line kit - oil, gas and corrosion resistant.

[Size] ID of 6an fuel hose:0.34"(8.63mm),OD:0.54"(13.71mm).Length:10ft.

[Parameter] Working pressure:500psi,burst pressure:2000psi; Temperature range:-40°F to 257°F (-40°C to 125°C);Min bending radius:63.5mm.

[Application] 6AN nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, and fuel,etc.

Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications.

Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes.

Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance; The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability.