Best Street Bike Fuel Lines in 2026

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

¼ inch inside diameter (.64 CM) and ½ inch outside diameter (1.27)

Custom Extra long 6 Foot Length (1.82) can be cut to size for all your applications

【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!

【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.

Gas line replacement

Low permeation 5/16" (8mm) inside diameter fuel line hose

Durable, flexible, long lasting fuel line

Gray color helps reduce potential for vapor lock on warm days and exposure to sunlight.

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.

Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches

The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications

Kit features professional- quality tool with ergonomic clamp-type grip

Innovative clamp-block design makes joining nylon to nylon barbed fittings easy

Straight and elbow connectors included to tackle the most popular applications

This is Red Color!

Tube length: 100cm

Inner diameter: 5mm

For 50cc 110cc 125cc 150cc 250cc Baja 90cc BA150 Chinese ATV Four Wheeler Pit Dirt Bike

Package:1pcs Red Hose Tube Line and 1pcs Fuel Filter and 6pcs Spring Clips+1pcs Shut Off Valve Petcock

Fits most Chinese brands and some Japanese brands such as TaoTao, Roketa, Baja, SunL, BMS, SSR, KMD, NST, Buyang, Coolsports, AIM-EX, Roketa, Kazuma, Honda, Redcat, Eagle, etc.

Upgraded replacement - the replacement fuel lines in this kit are made of stainless steel for added corrosion resistance

Pre-formed fit - these lines are already shaped to fit specific applications for easier installation

Complete kit - includes brackets and fittings for thorough repair

Inner diameter: 8mm; Outer diameter: 14mm; Adapt to temperature: -30 ° C -120 ° C; Wall thickness: 3.4mm/0.13".

The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

Easy to use and install;Good to replace it at regular intervals,extra 10 Pcs Mini Fuel Hose Clamps Adjustable with screw-tightening hose clamps for more robust applications. could save you a lot time to find proper clamp in local market.

Package Included:2 x Gas Fuel Filter +1 x Hoses Tubing+4 x Tubing Clips

for Mini Moto Dirt Bike Honda Suzuki Yamaha ATV Moped Scooter

Fuel hose line length: 99cm-100cm

[Excellent performance]: Disc brake conversion tool, brake hose for motorcycle, directly provide brake pressure to the brake calipers, improve brake sensitivity and braking force, and effectively shorten the braking distance

[High Quality & Durable]: The brake line for motorcycle is made of braided steel and PVC outer layer to ensure the motorcycle brake line durability and security

[Double Protection]: The outer layer is PVC wrapped, which has good heat insulation function; The inner layer of the motorcycle brake line is stainless steel casing to effectively avoid problems such as tubing expansion and damage

1/8" Fuel Line Gas Hose Size: 3.5mm*7.5mm, length: 3 feet; 3/16" Gas Line Fuel Hose Size: 4.5mm*8.5mm, length: 3 feet

0.22"*0.4" Fuel Gas Line Hose Size: 5.5mm*10.3mm, length: 3 feet; 1/4" Fuel Hose Gas Line Size: 6mm*12mm, length: 3 feet

5/16" Fuel Line Gas Tube Hose Size: 7.3mm*12.5mm, length: 3 feet

Type:Gas Tank Rebuild Kit,Gas Lines Fuel Hose

Works For Most Chinese 2-Stroke Scooters & Pocket Bikes,mini chopper, G-scooter, Visa GS43, Zomma TY ROD II go kart, Zooma Stand-up scooter.

22 Inch Long Fuel Lines. Comes With Black Grommet & 2 Fuel Lines.

Ready to install - these braided stainless steel and PTFE flexible fuel lines are already cut to specific length for standard cab GMC Sierra and Chevy Silverado pickups, with all brackets and connectors

Full length - these lines are made to the correct length for the specified vehicle, but flexible so they're easier to route than rigid lines, saving replacement time

Upgraded materials - high-strength, corrosion-resistant braided stainless steel protects PTFE hoses for reliable longevity under all conditions

Replacement O-rings for P/N 1521

’02-'16 Fuel Injected Electra Glides, Road Glides, Road Kings, Street Glides & Trikes, ’01-'16 Fuel Injected Softails, '04-'16 Fuel Injected Dynas & ’07-'16 Sportsters

Cover up the plumbing on your fuel injected bike with this two-piece streamlined beauty.

Model:X1 X2 X7 X8 Cat Eye Zooma

Package include: 1 x Gas Tank Rebuild Kit

Works For Most Chinese 2-Stroke Scooters & Pocket Bikes. Works For Cobra & THS As Well.

The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced.

The 6AN PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel line length: 25Ft, Inner Diameter: 5/16". Outside Diameter: 0.465inch. Please measure before purchase!

25Ft 6AN braided fuel injection line kit includes fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, 2pcs 6AN to 1/4"NPT hose adapter fitting, 2pcs 6AN to 3/8" hose adapter fitting, 1pc 6AN to 5/16" hose adapter fitting, 1 pc AN6 to 3/8"quick disconnect male.

A direct O.E.M. replacement vacuum operated fuel valve

This vacuum operated fuel valve has the highest fuel flow of any vacuum style fuel valve on the market

These valves feature the same high-quality, lustrous chrome finish as the Power-Flo line

【Product Color】Green / Red

【Product Specifications】9.5m Length 5mm ID Fuel Hose Line Pipe

【Product Fitment】Fits Many Chinese Made 50cc-160cc Pit Dirt Bikes Including Stomp Demon X, WPB, Orion, M2R, Lucky MX, Thumpstar, Explorer, Braaap, Atomic, Pitpro, Pitster Pro, DHZ, SSR, Piranha

Oil Hose Length: 900mm/35.43"

The inner layer of the motorcycle brake braided line is stainless steel casing to effectively avoid problems such as tubing expansion and damage.Plastic Tube,non-flammable,low permeability,durable for long time use

Brake Oil Hose Line in simple design,easy to install and direct fit with two M10 ends(10mm installing hole) ,long flexible brake hoses fit for most of motorcycle,bikes,scooter,Motocross,Street Bikes,Etc

[Double Protection] The brake steel throat adopts PA12 nylon pipe, which is wrapped with stainless steel braid +PU outer layer. The hydraulic clutch oil pipe is corrosion-resistant, rust free and has a longer service life.

[Size] The Line ends' banjo inner diameter is 10mm / 0.39". The two side banjo bend is 28 degree and 90 degree, Oil Line Length: 110cm / 43.31"

[Unique Design] With banjo ends design, you can install it on the vehicle. The Line provides a fashionable look for the motorcycle's brake system.

SPECIFITION: The two side banjo bend is 28 degree and 28 degree. Banjo inner diameter is 10mm / 0.39".

DURABLE MATERIAL: The brake hose is made of braided steel and PVC outer layer to ensure safety driving.

EXCELLENT RACING PERFORMACE: Very low friction performace to improve brake sensitivity and braking force, and effectively shorten the braking distance.

[High Quality Material] The fuel pipeline is divided into three layers: the inner pipe, the outer pipe, and the intermediate reinforcement layer. The inner and outer pipes are made of rubber, and the intermediate reinforcement layer uses special rubber impregnated wire for fuel pipes. Oil resistant, cold resistant, ethanol resistant.

[Cuttable] The fuel pipeline hose is flexible and customizable, and you can tailor it to fit all your purposes according to your needs.

[Durable Clamp] The kit contains 10 hose clamps made of high-quality spring steel, which are durable and reusable. Tight connections can prevent liquid leakage and make fuel flow more stable and safe.