Best Helix Racing Powersports Fuel Lines in 2026

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

¼ inch inside diameter (.64 CM) and ½ inch outside diameter (1.27)

Custom Extra long 6 Foot Length (1.82) can be cut to size for all your applications

【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!

【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.

Complete kit specific to motorcycles with Flathead, Knucklehead, Shovelhead and Panhead engines as well as V-Twins operated in hot climates or with wide clearances

*2007-up H-D motorcycle with the 96-inch and larger Twin Cam engines, users must purchase one extra bottle of Primary Chain Case Oil to meet this engine’s 38 oz (45 oz dry) capacity, compared to the 32 oz wet capacity of a Milwaukee-Eight, Evolution or V-Twin case

Includes 5 quarts of 20W60 Motorcycle Oil, 1 quart of V-Twin Transmission Oil with ShockProof, 1 quart of Primary Chain Case Oil, 1 bottle of Fuel Injection Cleaner for Powersports, a sticker kit, a Red Line Oil embroidered hat and a versatile funnel

1/4-inch I.D. x 3 Foot Clear Tygon Premium Fuel Line

Original Saint-Gobain Fuel Line

5 Feet

ID: 3/16"

Low permeation 5/16" (8mm) inside diameter fuel line hose

Durable, flexible, long lasting fuel line

Gray color helps reduce potential for vapor lock on warm days and exposure to sunlight.

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.

Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches

The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications

▶ WORRY-FREE COMBINATION ◀ The Package includes 3.28 Feet ID 1/4” inch Fuel Line; 5 x Hose Clamps. The dimensions of the two parts are compatible with each other. You can use them directly without additional purchases.

▶ Thickened Tube wall ◀ Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. The thick tube makes you feel at ease, no worries about leakage.

▶ LONG SERVICE LIFE ◀ Due to the high-quality nylon material, the average service life can reach 5 years. It is more durable than most products on the market.

COMPATIBILITY: 3/8 Barb Female Fuel Line for Yamaha/Mercury Outboards and Mercury Fuel Tank Side - Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7

FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends

DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant

The Package Includes:1×5 Feet(1.5m) 1/4" 6mm ID fuel line,6 × 2/5" ID 65 Manganese steel spring hose clamps,The dimensions of the two parts are compatible with each other,You can use them directly without additional purchases.

Wall thickness is 3mm:Contains 3 layers of material:1.The outer layer is Chloroprene rubber with good elasticity;2.The middle layer is Nylon Braided,Which increases the working pressure (300PSI / 2MPa) and the maximum burst pressure (1200psi / 8MPa);3.The inner layer is NBR,which can increase oil resistance,acid and alkali resistance,and resist various corrosive liquids.The thickened tube makes you feel at ease, No worries about leakage.

Our fuel line's main material is: NBR (copolymer of butadiene and acrylonitrile),Which makes our fuel line more resistant to high/low temperature (- 30 °C~120 °C) and aging compared with other common fuel lines,It will not crack and its performance ↑ 50%.No matter in extremely cold areas or high temperature desert, It will always accompany your vehicle to arrive the destination safely

ID: 1/4"

OD: 3/8"

5' Length

✅ Fuel lines are essential when it comes to the well-being of your fuel system - SO PREVENT LEAKAGE with our durable fuel line hose

✅ Made from polyurethane, will resist tough weather conditions, and won’t deform

✅ Get a fuel gas line you can rely on, 1/4 inch I.D

PA12 Nylon corrugated fuel hose, 5/16" inside diameter, 10" long.  8mm ID x 250mm

Two stainless steel "nut and bolt" fuel-injection style clamps included.

PA12 is rated for continuous immersion in fuels: gasoline, E85, diesel, etc.

Low temperature fuel line that is not affected by sub-zero temperatures

100% polyurethane fuel hose

Available in 5’ rolls

High precision spring Clamps band type clips for hose air hose, water pipe, motorcycle fuel line

6mm Inner Diameter Spring Clamps for 5mm Fuel Line Filter

Fit Trailmaster 150 XRS XRX Tomberlin Manco Kandi 150cc Go Karts

New OEM Arctic Cat Gauge Fuel W/Seal

OEM Part Number: 0570-086 (QTY 1) | Previous: 0470-444

Item only fits specific models listed. The picture could be generic.

1PZ Brand Products, Quality Ensured

This valve has 2 screws that way you can open it easily for cleaning, The on and off letter are labeled on the panel so you can read easily instead of weird symbols

Three Monthes Warranty, Hassle free Return, Money Back Guarantee, We Accept All No Reason Return, No Risk, No Hassle

For gas, diesel etc. fuel lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.

Strechy 2 layers compound structure, heavy duty. 10 ft in length. 1/4 in 6.4mm inner diameter and 7/16 inch outer diameter (10.4mm). The Hose Clamp is 10mm inner diameter, made of 1mm thinkness steel.

The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.

Application for Racing Fuel, Pump Gas, Fuels with Ethanol, Alcohol Based Fuels, Motor Oil & Coolant etc

Length:25 Ft , Inner Diameter: 8.73 mm (0.343"), Outside Diameter: 13.89 mm (0.547"), Universal Accessory, Easy to Operate

Good Quality and Durability, Working Temperature: -40F to 248F (-40°C to + 120°C) under most operating conditions; Working Pressure:1015 PSI - Burst Pressure: 6090 PSI

Racing colored tubing

High quality transparent and solid fuel line

Resists weathering, kinking, tearing, abrasion and impact

Compatible with many 50cc 70cc 80cc 79cc 90cc 97cc 110cc 125cc 150cc 159cc 196cc Mini bike, Dirt bike, Pit bike, Tao tao, Pocket Motocycle, Scooter, Moped, Quad, ATV and Go Karts

Fits in 3/16 id rubber fuel line with a 1/4 od fuel line inlet and out let. For some Honda Ryobi etc. generators.

Please note this is an inline fuel valve with one mouting hole, easy to install.

The industrys first and only

this is Red fuel hose line and Red fuel Filters,not is black.the black picture is wrong.

Package:4pcs Spring Clips and 1pcs Red fuel hose line and 2pcs fuel Filters

Fuel hose line length: 100cm

Package incude 40 feet fuel Line. 4 different size, each size 2 pcs, 8 pcs in total. Each 5 feet length.

4Size: I.D. x O.D: 0.08" x 0.14", 10 feet; I.D. x O.D: 3/32" x 3/16", 10 feet; I.D. x O.D: 1/8" x 3/16", 10 feet; I.D. x O.D: 1/8" x 1/4", 10 feet.

Material: Polyurethane, Oil and gas resistant, no compatible with greater than 10% ethanol fuel.

Replaces HD Part # 62168-81. For use with later 1975 - 2006 Harley models.

Internal Female 22MM thread.

"R" (Reserve), "ON" and "OFF" just like OEM. 1/4" barb accepts 1/4" ID hose.

◆Mount Hole Distance:27MM,Fuel Type:Fuel Switch Valve Petcock,Color:As photo shown,Positions Switch:ON | OFF | RESERVE.

◆ON/OFF/Res 3-Positon with mounting rubber seal.

◆100% Brand New Aftermarket part.

Top Quality: 3-Layers designed, inner pipe, outer pipe and intermediate reinforcing layer, The inner and the outer pipe are made of fluoro elastomer and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance, petroleum-resistant nitrile tube with a covering that resists weathering, ozone ,heat and can be used for ethanol-laced fuels and diesel fuel. This fuel hose is SAE 30R9-rated that will withstand up to 120 psi and 300 degrees.

Fitment: includes 6 Feet 1/4" ID Fuel Line; 4Pcs x 1/4 Inch & 5/16 Inch Fuel Filters; 20 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. They could be used widely for update your fuel line system, such as outboard boat system, motorcycles, ATVs, UTVs, Go Kart, Auto Vehicle's. Fuel line kit could also be used widely on lawnmower, Generator, power equipment and small engines Tool Etc.

Perfect fuel filters, They could effectively Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance..

This is Red Color!

Tube length: 100cm

Inner diameter: 5mm

For 50cc 110cc 125cc 150cc 250cc Baja 90cc BA150 Chinese ATV Four Wheeler Pit Dirt Bike

Package:1pcs Red Hose Tube Line and 1pcs Fuel Filter and 6pcs Spring Clips+1pcs Shut Off Valve Petcock

Fits most Chinese brands and some Japanese brands such as TaoTao, Roketa, Baja, SunL, BMS, SSR, KMD, NST, Buyang, Coolsports, AIM-EX, Roketa, Kazuma, Honda, Redcat, Eagle, etc.

Inner diameter: 6mm; Outer diameter: 12mm; Adapt to temperature: -30 ° C -120 ° C; Wall thickness: 3.1mm/0.12".

The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

Easy to use and install;Good to replace it at regular intervals,extra 10 Pcs Mini Fuel Hose Clamps Adjustable with screw-tightening hose clamps for more robust applications. could save you a lot time to find proper clamp in local market.