Best Kawasaki Fuel Lines in 2026

【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!

【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.

【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.

Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches

The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications

Fuel line: 1/4" ID. x 1/2" O.D, overall length 2 feet, Please verify your engine model and part numbers before purchasing to ensure you receive the correct parts.

Compatible with Kohler 24 393 16-S, 24 393 16, 24 393 04-S, 24 393 04, 24 393 02, 15 393 01-S, 15 393 01, KH-24-393-16-S, KH-24-393-16, KH-24-393-04-S, KH-24-393-04, KH-24-393-02, KH-15-393-01-S, KH-15-393-01

Compatible with John D LG808656 M138498 M145667, Compatible with Honda 16700-Z0J-003, Ryobi 308459007, Kawasaki 49040-7001 49040-2075

The Package Includes:1×5 Feet(1.5m) 1/4" 6mm ID fuel line,6 × 2/5" ID 65 Manganese steel spring hose clamps,The dimensions of the two parts are compatible with each other,You can use them directly without additional purchases.

Wall thickness is 3mm:Contains 3 layers of material:1.The outer layer is Chloroprene rubber with good elasticity;2.The middle layer is Nylon Braided,Which increases the working pressure (300PSI / 2MPa) and the maximum burst pressure (1200psi / 8MPa);3.The inner layer is NBR,which can increase oil resistance,acid and alkali resistance,and resist various corrosive liquids.The thickened tube makes you feel at ease, No worries about leakage.

Our fuel line's main material is: NBR (copolymer of butadiene and acrylonitrile),Which makes our fuel line more resistant to high/low temperature (- 30 °C~120 °C) and aging compared with other common fuel lines,It will not crack and its performance ↑ 50%.No matter in extremely cold areas or high temperature desert, It will always accompany your vehicle to arrive the destination safely

Brand new and high-quality replacement straight fuel cutoff valve with clamps;

Package includes 2 pieces fuel shut-off valve, plus 4 pieces spring clamps;

Universal straight fuel cut-off valve, fit for 1/4-inch fuel line;

For gas, diesel etc. fuel hose lines, vapor emission lines and vacuum smog control. Please note it's a non pressure fuel line, not for engines with fuel pumps.

Strechy 2 layers compound structure, heavy duty. 10 ft in length. 3/16 in 4.8mm inner diameter and 11/32 inch outer diameter (8.8mm). The Hose Clamp is 8mm inner diameter, made of 0.8mm thinkness steel.

The Fuel Lines are oil resistant, hot and cold resistant from -22F to 338F and ethanol tolerance; Extra long can be be cut to size for all your usage.

Universal fuel shut off valve: Can be used on I.D. 1/4-inch fuel line. COMPATIBLE WITH BS 494768 493960 698183 698181 697947 5019H 5019K; John D AM107340 AM36141 698183MA, MU698183; To-ro 54-3150 1-603770 5841-1 5905-1; Sna-pper 3-4212 / 2-4507 / 7034212

Compatible with Koh-ler CH13 CH18 CH20 CH22 CH23 CH25 CH620 CH621 CH640 CH670 CH680 CH730 CH740 CH750 CV17 CV18 CV19 CV20 CV22 CV22S CV23 CV25 CV490 CV491 CV492 CV493 CV620 CV624 CV640 CV670 CV675 CV680 CV682 CV724 CV725 CV730 CV732 CV740 CV742 CV750 CV752 CV940 CV960 CV980 CV1000 SV470 SV471 SV480 SV530 SV540 SV541 SV590 SV591 SV600 SV601 SV610 SV620 SV710 SV715 SV720 SV725 SV730 SV735 SV740 SV810 SV820 SV830 SV840 SV530S SV540S XT650 XT675 KT610 KT620 KT715 KT725 KT730 KT735 KT740 KT745

John D LA105 LA110 LA115 LA120 LA125 LA130 LA135 LA140 LA145 LA150 LA155 LA165 LA175 G100 G110 GT235 GT235E GT245 GX255 GX325 GX335 GX345 GX85 L105 L107 L108 L111 L118 L120 L130 LT166 LT180 LT133 LT155 LTR155 LT190 LTR166 LTR180 LX172 LX173 LX176 LX178 LX186 LX188 LX277 LX280 LX288 D100 D105 D110 D120 D125 D130 D140 D150 D155 D160 D170 Z225 Z235 Z245 Z255 Z335E Z335M Z345M Z345R Z355R Z375R Z425 Z435 Z445 Z465 S1642 SST15 STX30 STX38 STX46 RX63 RX73 RX75 RX95 SX75 SX95

Compatible with BRIGGS & STRATTON 494768, 697947 ,698183，5056 5056D 5056K 691035； For JOHN DEERE AM36141, AM107340 SNAPPER/KEES 2-4507 , 7034212 TORO/WHEEL HORSE 54-3150； For KAWASAKI 49019-7001； For OREGON 07-107； For OREGON 07-112； All 1/4 Quarter inch Fuel Lines.

Compatible with Kohler: 25 050 02, 25 050 02-S, 25 050 07-S, 25 050 21-S, 25 050 21-S1; For Land Pride: 831-031C, 831-035C; For Tecumseh: 34279A, 34279B, 34729, 740003B; For Toro: 105-8045, 108-3854; For Walker: 5020; For Woods: 70311.

Package Included: 3x 1/4" Fuel Shut Off Valve, 3x 1/4" Fuel Filter, 12x Hose Clamps

For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control

Fuel line:1/4 inch inner diameter (0.64 CM) and 1/3 inch outer diameter (0.8CM)；Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 1/3-inches

The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications

1/8" Fuel Line Gas Hose Size: 3.5mm*7.5mm, length: 3 feet; 3/16" Gas Line Fuel Hose Size: 4.5mm*8.5mm, length: 3 feet

0.22"*0.4" Fuel Gas Line Hose Size: 5.5mm*10.3mm, length: 3 feet; 1/4" Fuel Hose Gas Line Size: 6mm*12mm, length: 3 feet

5/16" Fuel Line Gas Tube Hose Size: 7.3mm*12.5mm, length: 3 feet

🏍️【Lawn Mower Fuel Line - Upgraded Set】-The Huthbrother includes 6-Foot Length Stretchy 1/4 Inch ID Fuel Line+ 2 Pcs 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps +2 Pcs 1/4 698183 Fuel Shut & 1 Pcs Carb Carburetor jet cleaning brushes. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!

🏍️【3-layer thickened fuel line】-The fuel line is divided into 3-layers: inner pipe, outer pipe, and Braided fuel line. The inner pipe are made of rubber and outer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot hose can be cut to size for all your applications.

🏍️【Hose Clamps】-Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage.

【Premium Material】Our motorcycle NBR Rubber fuel line is made of high-quality Rubber that are resistant to abrasion, heat, and other types of wear and tear, ideal for long-lasting use in tough conditions, no leakage or breakage issues.

【Perfect Fit】Accurately measured with an inner diameter of 1/4" and an outer diameter of 15/32". This diesel fuel line hose comes in a variety of sizes to ensure a proper fit for most motorcycle models, eliminating the need for modifications or adjustments.

【Easy to Install】With its flexible design, the fuel tube is easy to install and suitable for both novice and experienced motorcycle enthusiasts. Gasoline fuel hose kit package with 20 pcs fuel tube clamp and 2pcs fuel filter, allowing for flexible customization to meet your repair needs.

SUITABLE FOR 1/4" & 5/16" - Inline Gas Fuel Filter for 6mm & 8mm 1/4" & 5/16" internal diameter pipe. These gas tapper filters are barbed, so there is no slippage from the fuel line. Easy to install and have no problems with leaking issues.

EASY TO SEE INSIDE - With this type of filter you can see if the filter is dirty and the debris that it has kept out of your gas line & carb. Installs easily and quickly. Do yourself a favor and swap out your old filter for one of these and replace it every couple of years.

CLEAN THE FUEL - If you don't use them already, these inexpensive filters are invaluable in keeping the debris that will get into your small engine fuel tank from getting to the carb. These will stop that crud from getting into the carb.

Top Grade 100% polyurethane is not affected by subzero temperatures

Blue translucent color allows for visual confirmation of fuel flow

Blue color provides cool unique custom look to your engine compartment

【9.8ft Fuel Hose Set】You will receive a length of 9.8ft NBR fuel line hose and 20 pcs hose clamps. Our oil hose can be applied to a variety of home outdoor mechanic occasions to meet your various needs, and is a necessary combination of tools for mechanic products.

【Thicker Fuel Hose】Our oil hose is made of NBR rubber with a braided layer of polyester thread in the middle. The wall of our fuel hose is thick enough to have the advantages of not easy to wear, not easy to aging, high temperature resistance, low temperature resistance, good acid and alkali resistance. The bending performance of the fuel hose is very good. Working Pressure: 300 psi. Burst Pressure: 1160 psi. Temperature range: -20°F to 221°F(-30°C to 105°C).

【Long Service Life】Our fuel hose is not only well made, but also has a smooth and flat surface that can withstand large pressure, which is perfect for connecting and replacing the rubber fuel lines of various ATVs, motorcycles, snow blowers, lawnmowers, tractors, scooters, golf carts, pond pumps and other small engines. The hose clamps included in the product can help you secure the oil line well and make it serve you for a long time.

WORKS ON MOST GENERATOR THAT HAVE 3/16" GAS LINE - Works good on your honda Sportsman generator fuel line. this size line also would work on your Champion generator. Fuel line will hold up fine and works great on your Generator from the fuel tank to the carb.

GREAT FUEL LINE FOR SMALL ENGINES - For gas, diesel etc. fuel hose lines, vapor emission lines and vacuum smog control. Please note it's a non-pressure fuel line, not for engines with fuel pumps.

LAWNMOWERS / RIDING MOWER FUEL LINE - For use in mowers tractors snow blowers dirt bikes pit bikes tao tao and just about all small engines. Works perfectly to replace the cracked and leaking line on your generator.

[Fitment] The SOFO Universal Fuel Line Hose is designed to emit fuel vapor and control vacuum smog, making it a versatile solution for a range of engines, including Briggs & Stratton, Kawasaki, Kohler, John Deere, Craftsman, Simpson, Husqvarna, Oregon, Stens, Gravely, and Kubota. It is suitable for use in a variety of fuel-powered equipment, including Go-Karts, ATVs, Mini Bikes, Jeeps, Motorcycles, Lawn Mowers, Snowmobiles, and more.

[Package Contents] Each package includes a 10ft 1/4-inch (with a supporter) ID Fuel Hose, 2 Fuel filters, and 5 ID Hose Clamps. The fuel hose has a 1/4-inch (6.4 mm) inner diameter and 10 mm outer diameter, providing a reliable and secure connection.

[High-Quality Materials] The fuel hose is made of 100% brand new, wear-resistant rubber with a 6.4 mm inner diameter, ensuring durability and longevity. The hose clamps are constructed of spring steel, providing a reliable and reusable solution.

【5 Sizes Set】you will receive 5 different specifications lengths 3.3ft NBR fuel line hose (inner diameter are 3/8in,1/2in,5/16in,1/4in,3/16in) and 20 hose clamps. The 5 different inner diameters of our products can be applied to various home outdoor mechanic occasions, to meet your various needs, and is the necessary combination of machinery maintenance tools.

【Thicker Fuel Hose】Our oil hose is made of NBR rubber with a braided layer of polyester thread in the middle. The wall of our fuel hose is thick enough to have the advantages of not easy to wear, not easy to aging, high temperature resistance, low temperature resistance, good acid and alkali resistance. The bending performance of the fuel hose is very good. Working Pressure: 300 psi. Burst Pressure: 1160 psi. Temperature range: -20°F to 221°F(-30°C to 105°C).

【Oil Tube Size】Our 5 different sizes of flexible NBR rubber tubes are: ID: 3/16in OD: 0.43in (11mm); ID: 1/4in OD: 0.47in (12mm); ID: 5/16in OD: 0.55in (14mm) ; ID: 3/8in OD: 0.64in (16.5mm); ID: 1/2in OD: 0.74in (19mm). This cost-effective product set can meet your different needs at once.

【1/4 ID Fuel Line】The Fuel Lines are oil resistant, hot and cold-resistant(from -22F to 338F) and ethanol tolerance. Total 9.85 feet (3m) long fuel line hose can be cut to size for all your applications.

【1/4 Fuel Line Clamp】The hose clamps size is 2/5inch ID, made of 1mm thinkness steel, suitable for 1/4" ID fuel line.

【Wide Application】Fuel lines, vapor emission lines and vacuum smog control, designed for conveying gasoline, E-85, diesel, and bio-diesel. Please note It's a low pressure fuel line, not for engines with fuel pumps.

WORKS ON MOST MOWERS THAT HAVE 1/4" GAS LINE - The parts work fine in replacing the whole fuel line on your old lawn tractor. You can use a little soapy water on the tubing to push it onto the filter and onto the gas tank. Make sure the little metal spring clips are on the tubing a little further down than the lenght of filter ends. It makes it alot easier to put on that way and the soapy water alows the tubing to slip on smoothly.

GREAT FUEL LINE FOR SMALL ENGINES - The correct OD is so much easier to install on a small engine than the larger diameter automotive fuel line. There is is enough to do two to three engines (or more) depending on the length of run(s) required. This tubing fit your current small engine repair requirement and will be perfect for planned future upgrades and repairs.

LAWNMOWERS / RIDING MOWER FUEL LINE - Good Quality 1/4 Inch Gas Line Hose for your Lawnmowers. Just the right amount of 1/4 inch hose you needed to replace Factory Fuel Lines on push mower and riding mower. This is Quality Goodyear Hose Made in the USA unlike the crap that was deteriorating from the lawnmower manufacturers.

7 Piece Bundle Including 4 Foot of 1/4 Inch I.D. Pro-1 Braided Fuel Line, 4 Clamps, 1 Shut-off Valve, and 1 Pro-1 Gas Inline Fuel Filter

Quality Aftermarket Replacement Parts. Fits small tractors, lawn mowers, snow mobiles, go karts, and more

Replaces Fuel Line on many Carburated Small Engines Including Kawasaki, Tecumseh, Briggs and Stratton, Kohler, and many others

Szie: 10 ft in length. 1/4 in 6.4mm inner diameter and 1/2 inch outer diameter (12.7mm)

Fuel Hose Material: NBR, this stuff lasts for a long time, flexibility, soft and easy to work,Extra long can be be cut to size for all your usage.

Applicable temperature range: -22F to 248F

Please check your engine model and part number before purchasing to ensure you receive the correct part. 3/16" Small Engine Fuel Line Compatible With Club Car Lawn Tractor

3/16" Small Engine Fuel Line Compatible With Craftsman Weedwacker

3/16" Small Engine Fuel Line Compatible With Murray Push Mower Parts

Quarter Inch Atv Fuel Line Compatible With Kawasaki Gas Fuel Scooters

1/4'' Lawn Mower Fuel Line Compatible With Tao Tao Gas Small Engines

1/4'' Lawn Mower Fuel Line Compatible With Yamaha Motorcycle Dirtbike Parts

1/4'' ID Fuel Line (6mm ID x 12mm OD) 3 feet long, 3/16" ID Fuel Line (4.5mm x 8.5mm) 3 feet long

0.22" ID Fuel Line (5.5mm*10.3mm) 3 feet long, 1/8" ID Fuel Line (3.5mm*7.5mm) 3 feet long

5/16" ID Fuel Line (7.3*12.5MM) 3 feet long

New OEM Kawasaki Pump Fuel

OEM Part Number: 49040-3718

Item only fits specific models listed. The picture could be generic.

Inner diameter: 6.4mm; Outer diameter: 10.4mm; Adapt to temperature: -22F - 338F

Fuel pipeline is oil-resistant, cold-resistant and ethanol-resistant; Customized super-long 10 feet (3 meters) can be cut according to all your applications.

It is suitable for conveying gasoline, E-85, diesel and biodiesel fuels in lawn mowers, cultivators, tractors, snow blowers, motorcycles, mini-bicycles, cross-country bicycles, generators, garbage pumps, pit bicycles, all-terrain vehicles, UTV, go-karts, Tao Tao, four-wheeled vehicles, snowmobiles, power pressure washers, marine outboard machines and motors, and almost all of them.

Ready to install - these braided stainless steel and PTFE flexible fuel lines are already cut to specific length for standard cab GMC Sierra and Chevy Silverado pickups, with all brackets and connectors

Full length - these lines are made to the correct length for the specified vehicle, but flexible so they're easier to route than rigid lines, saving replacement time

Upgraded materials - high-strength, corrosion-resistant braided stainless steel protects PTFE hoses for reliable longevity under all conditions

Universal Fuel Line 25 feet of 1/4" line for 1/4" fuel filter.

High-quality, kink- and abrasion-resistant. Exceptional chemical resistance including gasoline, grease and oil strong, yet flexible.

Fits: Honda Kawasaki Yamaha Suzuki

1/8" ID Fuel Line Hose + Fuel line Clamps for For Lawn mowers, Lawn Tractor, harvesters, snow blowers, golf carts, motorcycles, ATV, UTV, Dirt Bike, Weed Eater, Generator, and other power equipments.

Size: Fuel Line Hose with 12 Pcs Clamps, Internal Diameter 1/8" (3.5mm) , Outside Diameter 5/16" (7.5mm) , 6 Feet / 2 Meter Length.

Feature :Long-lasting durability, against fluctuating under hood temperatures