Best Goolrc in 2026

GT5 transmitter using 2.4GHz AFHDS 2A system, with strong active and passive anti-interference ability. With FS-BS6 receiver, the output of 6 channels, compatible model cars, boats and other models.

ABS function (automatic brake): This function only adjusts the throttle channel, including six kinds of parameter settings, automatic brake settings to adapt to different models of track, to achieve the best braking effect and cornering control effect.

F.SAFE Function (Fail-Safe Protection): This function can protect the safety of the model when the receiver can not receive the signal from the transmitter normally, and move the actuator arm to the pre-set position.

Reliable, interference free 2.4GHz AFHDS2A signal operation.

Use only 4*AA batteries for transmitter.

Digital receiver system.

Features: Functions: Forward, backward, turning left and right, 360° rotating, no matter land, sandy beach, grasslands can be break through easily, fearless, your kids will be endlessly entertained.

2.4GHz transmitter, you'll never get any radio interference with this electric car.

Full-scale design, proportional control. Simulation dual flow drive gear box; Rotate 360° in situ; Cross-groove distance up to 10cm; Climbing slope 30°; The wading depth can reach 5cm; Openable gull-wing door; Front wheel self-adjusting track tightness.

Reliable, interference free 2.4GHz AFHDS signal operation.

Use only 4*AA batteries for transmitter.

Adjustable steering dual-rate.

💯【High-Speed Performance】: Built-in super strong, powerful and high efficiency strong magnetic motor makes the electric energy converted into power maximally and the running speed is up to 60km/h.

💯【2.4G Remote Control Frequency】: 2.4GHz Radio System with anti-jamming capability allows us to race at the same time on the same track. The control distance is up to 100 meters.

💯【Tough Parts】: The base is made of high-strength aluminum alloy with strong stability. Zinc alloy gear, with strong wear resistance.

◆ High-Speed Performance: Built-in super strong and powerful 20000RPM 550 brushed motor makes the electric energy converted into power maximally and the running speed is up to 60km/h.

◆ Large Capacity Battery: Large capacity battery gives a longer working time to reach a perfect driving experience. Let's enjoy the fun of playing the remote control car.

◆2.4G Remote Control Frequency: 2.4GHz Radio System with anti-jamming capability allows us to race at the same time on the same track. The control distance is up to 100 meters.

Replacement for: 1:10 Scale Traxxas HSP Tamiya HPI Kyosho Drift Car.

Made of high quality plastic which has lighter weight, durable.

Tire Diameter: 2.40inch(61mm); Tire Width: 1.02inch(26mm).

Tires: Outer Diameter: 134mm/5.3in Tire Width: 70mm/2.7in.

Material: Rubber+Plastic.

Wearproof easily assembly.

Replacement for: 1:10 Scale Traxxas HSP Tamiya HPI Kyosho On-Road Drifting Car

Made of high quality plastic which has lighter weight, durable.

Tire Diameter: 2.40inch(61mm); Tire Width: 1.02inch(26mm)

【Lighting Price: 43.99 for, Until 7.18】3CH remote control for RC cars and boats.

Works between 2.400GHz to 2.4835GHz frequencies, divided into 160 wave bands.

It covers the entire band width of the antenna bandwidth range.

Replacement for 1/10 Traxxas HSP Redcat RC4WD Tamiya Axial SCX10 D90 HPI RC Crawler Car.

Make your RC car more vivid and attractive.

Made from high quality metal, durability in use.

4 pole 12 slot high-torque motor design, Suit for 1/10, 1/8 scale RC car.

CNC machined 6061 T6 billet aluminum heatsink can.

High purity copper windings maximizes efficiency, Precision engineered for maximum energy conversion.

Reliable, interference free 2.4GHz AFHDS2A signal operation.

6-Channel receiver.

Digital receiver system.

High quality and cheap price.

Flashing fast-slow Flashing alternately Mode.

Strobing-blasting Flashing Mode.

2.4GHz transmitter, you'll never get any radio interference with this electric car.

High-quality PC material car shell, like a real car, excellent flexibility, to prevent the impact of rupture.

The speed reaches up to 30 KM/H, which makes the car race faster than others. You can enjoy drifting with the on-road anti-skid drift tires.

Functions: Up/down, turn left/right, forward/backward, left/right side-fly, 6-axis gyroscope; This small RC helicopter is a portable and small-sized drone that is more convenient to carry when traveling, allowing you to enjoy flying everywhere.

Aileronless Helicopter: This helicopter without ailerons is more flexible in operation and more stable in flight. The flight attitude is not easy to be skewed and does not require excessive manual correction. Because of the reduced weight and less drag, the aileronless helicopter is more powerful.

6-Axis Gyroscope: The aircraft adopts the 6-axis gyroscope achieves great flight stability, especially suitable for beginners to fly.

It can be used for 4-axis and 6-axis,or fixed wing airplane for FPV.

Portable dismantling screw without a screwdriver, simpler for GoPro3 installation.

High quality and nice apperance.

4 Pole 12 slot hi-torque motor design.

High purity copper windings maximizes efficiency, CNC machined 6061 T6 billet aluminum heatsink can.

High RPM ABEC5 oversized bearings,Short stator, less wire, lower resistance, more power.

Supports Esky, Futaba, JR, FS simulator software.

It can transfer the PPM signal to PC internal channel control vector.

Input: 4-8 channel PPM signal.

Replacement for: 1:10 Scale Traxxas HSP Tamiya HPI Kyosho On-Road Drifting Car

Made of high quality plastic which has lighter weight, durable.

Tire Diameter: 2.40inch(61mm); Tire Width: 1.02inch(26mm)

★ Good Gliding Performance: It adopts high efficient pneumatic contour design, ensures good stability, operability, and gliding performance.

★ Lightweight But Stable: Be made of EPP material, lightweight, high flexibility, not easy to break.

★ 6CH: 2.4Ghz, no interference. Fly forward, backward, turn left/right, up and down, left and right side fly, roll left and roll right.

Suit for 1/10 RC cars.

Originally Aluminum 7075.

Hard anodized on the gear surface.

4 poles 12 slot Hi-torque motor design.

CNC machined 6061 T6 billet alumium heatsink can motor.

High RPM ABEC5 oversized bearings.

Waterproof and dustproof, perfectly fit for 1/10 RC car.

Strong resistant current capability and excellent heat dissipation, Easily programmed and compatible with pocket-sized program card.

High current capability of 80A continuous current and 480A burst current ensures a stable driving.

Efficient aerodynamic contour design ensures good flight performance and stability, better gliding performance.

The size of the ultra-mini can be played indoors, or the community garden, the small yard is a good flight site, does not need a large space, brings more convenience to the player.

Some 11 grams of body weight, let you fly with confidence, do not worry about accidental impact caused damage to the product or damage to people and objects.

Waterproof and dustproof, perfectly fit for 1/8 RC car.

Strong resistant current capability and excellent heat dissipation, Easily programmed and compatible with pocket-sized program card.

High current capability of 150A continuous current and 720A burst current ensures a stable driving.

【EASY TO FLY】 Easy to get started, all you need to do is to spin it up and give it a toss.Different throwing speeds and angles allow different flight paths, tricks and high-speed maneuvers.Turn on the power button, hold the center axis and spin the wheel to start it.If you want to stop playing, just grab it and stop the spinning.You can throw it and catch it yourself. It will travel stably in a straight line if you throw it downwards.

【Lightweight and Portable Design】Lightweight and flexible bendy to withstand countless crashes. It is designed to play indoors as well as outdoors.

【USB Rechargeable】Built-in rechargeable battery with fast charging time. Our drone can be charged through any USB port. It takes 15 minutes for a single charge and 15 minutes for flying.

3.175mm shaft diameter.

4 pole 12 slot high-torque motor design.

If you have any problem, please feel free to contact with us without hesitation.

High purity copper windings maximizes efficiency,Suit for 1/10 scale RC car

Precision engineered for maximum energy conversion

Precision balanced rotor, smoothness for best reliability and maximum RPM

Suit for 1/10 RC Car Off-road Truck and RC Boat.

Compatible with brushed motor.

The strong resistant current capability, excellent heat dissipation.