Best Gransun in 2026

Made in Wichita, Kansas from aerospace grade, USA produced, billet aluminum

Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum

Compatible with all gen III engine blocks

Direct OEM replacement

Meet strict Ford motor Company standards

Safety and durability

Attention - No Standalone lithium batteries are sold with the product.

EASY TO INSTALL- Quick Start Guide has you operational in minutes. Can expandable up to 4 sensors and unlimited receivers for complete coverage of your perimeter. wireless driveway alarm Detects movement from humans, cars, and large animals.

SUPER LONG RECEVING RANGE - 1/2 mile (in ideal situations). Our range is double the ? mile competitors claim under ideal conditions. We use newer technology components and excellent manufacturing techniques. Our system has been real world tested in settings with trees, buildings, walls, and vehicles. It easily achieves a 1500FT wireless range in most conditions. It¡¯s been tested through thick forestry, hail storms, gusty winds, heavy rains, scorching heat, and snow.

The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of ± 16g.

The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.

Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °

MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor

Communication mode: standard IIC communication protocol

Chip built-in 16bit AD converter, 16bit data output

MPU-6050 MPU6050 6-axis Accelerometer Gyroscope Sensor

Communication mode : standard IIC communication protocol

Chip built-in 16bit AD converter, 16bit data output

Ideal replacement - this accelerator pedal position sensor matches the fit and function of the original sensor

Plug & play installation - no special tools or programming required to install this sensor

Trustworthy construction - engineered in North America and made from high-quality materials for long life

Compatible: Fit for Honda TRX400FA and TRX500FA.

Warranty: 2 years; Each product strictly checked before shipment.

Easy to install, fast response,stable performance, close to original effect.

Replacement Acceleration Pedal Position Sensor Assembly - The acceleration pedal position sensor or APPS determines the angle or position of the throttle or accelerator pedal enabling the throttle body to open depending how far the pedal is pressed which results into acceleration or deceleration of the vehicle.

Compatible With Chevrolet, GMC, Cadillac & Hummer Vehicles - 2007 - 2011 Escalade | 2007 - 2011 Escalade ESV | 2007-2011 Escalade EXT | 2007-2011 Avalanche | 2007-2011 Silverado 1500 | 2007-2011 Silverado 2500 HD | 2007-2011 Silverado 3500 HD | 2007-2011 Suburban 1500 | 2007-2011 Suburban 2500 | 2007-2011 Tahoe | & more. See below for the full vehicle list.

Replaces Part# 25832864, 699-105, 699105 commonly found on popular Silverado, Sierra, Avalanche, Suburban, Yukon or H2 vehicles including year models 07, 08, 09, 10, 11. The acceleration pedal position sensor can easily be located under the dashboard of the driver and can easily be replaced by removing a few clips and bolts.

Three axis sensing, 10-bit precision with �2g/�4g/�8g/�16g selectable scaling

Both I2C (2 possible addresses) and SPI interface option

Plus 3 additional ADC inputs you can read over I2C

【 High Performance 】Accurate output data: 3-axis XYZ (Pitch Roll Yaw) Acceleration + Gyro + Angle+ Magnetic field, Bluetooth coverage range: within 50meters (without obstacles like walls)

【 Robust Design 】low consumption Bluetooth 5.0 (battery life about 10 hours), compatible with Andriod Smartphone (Support multiple-connection up to 4 sensors with 1 Android phone), Windows computer

【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy

This HX711 amplifier module uses 24 high precision A/D converter chip hx711,2 selectable differential input channels.

This weighing sensor amplifier module can use to be weight scales, kitchen scale, industrial process control etc.

High precision electronic scale designwith two analog input channelthe internal integration of 128 times the programmable gain amplifier.

Direct replacement - this diesel injector control pressure (IPC) sensor matches the fit, function and performance of the original equipment sensor

Reliable construction - this IPC sensor is built from quality components to deliver an accurate signal to the ECM

Easy installation - this sensor features a factory-style electrical connector

【 High Performance 】Rock-solid data output: 3-axis XYZ (Pitch Roll Yaw) Acceleration+ Gyro+ Angle+ Magnetic field, measurement range and output rate ( 0.2-200Hz) selectable

【 Robust Design 】4-hour battery life, long term measurement while recharging,10-meter Bluetooth measurement range (no obstacles like walls), Support multi-connection via WITMOTION PC software simultaneously (USB-HID adapter required)

【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering ensuring stable data output and excellent bias stability, low noise level

【 High Performance 】Rock-solid data output: 3-axis XYZ (Pitch Roll Yaw) Acceleration+ Gyro+ Angle , measurement range and output rate ( 0.2-100Hz) selectable

【 Robust Design 】4-hour battery life, long term measurement while recharging,10-meter Bluetooth measurement range (no obstacles like walls), Support multi-connection via WITMOTION PC software simultaneously (USB-HID adapter required)

【 WITMOTION Advantage 】8-year Professional Attitude Measuring Solution Provider, sensors integrated R&D dynamic fusion algorithm and Kalman Filtering, ensuring stable data output and excellent bias stability, low noise level, increasing measurement accuracy

The accelerator pedal position (APP) sensor's primary job is to monitor the position of the throttle pedal and send an electronic signal to open the throttle body as you depress the gas pedal.The APP sensor essentially tells your engine how fast or slow to drive as you press the gas pedal. When you press down or lift off the throttle, it sends an electrical signal to the vehicle’s ECU or ECM as it's also referred to, and then transmits that signal to the fuel system.

This Accelerator Pedal Position Sensor Assembly Fits for 2004 - 2008 Acura TL 3.2L V6, 2007 - 2008 Acura TL 3.5L V6, 2004 - 2008 Acura TSX 2.4L L4, 2003 - 2007 Honda Accord, 2003 - 2006 Honda Acura MDX, 2005 - 2006 Honda CR-V, 2007 - 2011 Honda Element, 2005 - 2008 Honda Pilot, 2006 - 2014 Honda Ridgeline.

Customers can find the product you need accurately according to the OE number. OEM replace part number: 37971-RBB-003, 37971-RCA-A01, 37971-PZX-003,37971-RDA-A01; Replace Part Number: 5S8776, APS147,PPS1046, 72-7080,1802-300281, 2-80046, SU10238.

HELLA electric / electronic solutions provide crucial help in making driving safer, more efficient and more comfortable. HELLA also supports the trend of electric driving with an extensive product portfolio for all development stages of electrification.

The accelerator pedal sensor transmits the position of the accelerator pedal to the engine control unit. Based on this information, the load requested by the driver can be implemented immediately

Accelerator pedal sensor for Audi & VW, Check for proper model year fitment.

Installation:The package includes the installation instructions please see the following Product Description.

Accelerator pedal position sensor assembly transmits the position of the car accelerator pedal to the engine control unit,it controls fuel flow in your car or truck,so it's absolutely very necessary for you to consider replacing a replacement accelerator pedal position sensor when your vehicle experiences problems such as poor acceleration and reduced vehicle speed.

Compatible with: 2003-2007 Honda Accord, 2003-2006 Honda Acura MDX, 2004-2008 Honda Acura TL, 2004-2008 Honda Acura TSX, 2005-2006 Honda CR-V, 2007-2011 Honda Element, 2005-2008 Honda Pilot, 2006-2014 Honda Ridgeline.Please check compatibility before purchasing a new one for your car.

Direct OEM replacement

Package Dimensions: 6.0 H x 1.4 L x 4.0 W (inches)

Package Weight: 0.12 pounds

✅The Load Cell maximum measures force: 20kg (44lb)

✅You need to connect load cell with HX711 module like this, Red to E+, Black to E-, Green to A+, White to A-

✅Load Cell: 4 leads, easy to use, plus 5-10V drive voltage, direct output as a voltage signal due to force changes. Works for arduino and raspberry pi

All Alliant Power sensors are backed with a 24 month unlimited Mileage warranty.

Alliant Power Products are backed by First Class Technical Support.

Alliant Power supplies over 200 high demand parts for over 20 different engine applications.

ADXL345 is a small ultra-low power 3-axis accelerometer with high resolution (13-bit).(Note: ADXL345 only senses linear motion, not rotational)

Variable range: With ±2g, ±4g, ±8g, ±16g variable measurement range.ADXL345 module can detect the deviation of the gravity of a static object on the XYZ axis

ADXL345 can measure static gravitational acceleration in tilt-sensitive applications as well as dynamic acceleration in motion and even vibration environments, making it ideal for mobile device applications such as mobile phones, gaming and positioning devices, miniature navigation devices, hard drive protection, sports fitness equipment, digital cameras and other products have been widely used

We are responsible for the order from diymore, which is shipped from Amazon warehouse.

Size: 21*15*1.2 mm(max).

Acceleration range: ± 2 ± 4 ± 8 ± 16g.

ADXL345 is well suited for mobile device applications. Can measure the static acceleration of gravity in tilt-sensing applications, it can also measure both dynamic acceleration resulting from motion or shock. Its high resolution (4 mg / LSB), capable of measuring the angle of inclination changes less than 1.0 °.<br>

Digital output data is 16-bit twos complement format, via SPI (3-wire or 4-wire) or I2C digital access interface.<br>

ADXL345 is a small, thin, low-power 3-axis accelerometer with high resolution (13-bit) measurement at up to 16g.<br>

Magnetic Pick Up | Speed Sensors | Magnetic Sensors (Heavy Duty), P/N 71256-00

Connection Lead wires (2)

Thread 3/4” x 16 UNF

Part Number:4040081 4010298 2201625

100% New and High Quality Aftermarket Hall Effect Speed Sensor

Compatible with Polaris Sportsman 335: 2000;Sportsman 400: 2001-2005;Sportsman 450: 2006-2007;Sportsman 500: 2000-2010;Sportsman 570: 2008;Sportsman 600: 2003-2005;Sportsman 700: 2002-2007;Sportsman 800: 2005-2010

100% brand new and high q100% brand new and high quality.uality.

Oil-proof, waterproof and anti-corrosion, suitable for all kinds of environments.

S beam design. Precise and stable. Easy installation.

⚙【Product name】GY-521 MPU-6050 module: integrates 3-axis gyroscope and 3-axis accelerator.

⚙【Built-in chip】:with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs.

⚙【Parameter】:The chip used: MPU-6050 Power supply: 3-5v (internal low dropout voltage regulator) Communication method: standard IIC communication protocol Chip built-in 16bit AD converter, 16bit data output Gyroscope range: +250 500 1000 2000 °/s Acceleration range: ±2 ± 4 ± 8 ± 16g Using immersion gold PCB, machine welding process to ensure quality Pin pitch: 2.54mm.

The SparkFun LSM6DSO 6 Degrees of Freedom Breakout is an accelerometer and gyroscope sensor with a giant 9kB FIFO buffer and embedded processing interrupt functions.

Each LSM6DSO breakout has been designed to be super-flexible and can be configured specifically for many applications. With the LSM6DSO breakout you will be able to detect shocks, tilt, motion, taps, count steps, and even read the temperature!

Features: 2x Qwiic connectors, I2C Address: 0x6B (default), 0x6A; Accelerometer measurement range: ±2/±4/±8/±16 g full scale; Gyro measurement range: ±125/±250/±500/±1000/±2000 dps full scale