Best Gsi Machine & Fabrication in 2026

Optima Battery Box Tray

USA Designed & Manufactured

11 Gauge A1008 Mild Steel, Box Cut & Laser Cut In-house

Secure replacement - this battery hold down replaces a worn, stripped or missing original equipment hold down

Maintains battery - reducing battery movement helps ensure maximum battery life

Check fit - to see if you have correct hold down, check application fit, size or style

A rugged battery tray for group 31 batteries, including marine, RV, camper, and trailer batteries.

Features a heavy-duty 42-inch hold-down strap with nylon resistant webbing that withstands a tensile load of over 120 kilograms of force.

Impact-resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure.

Battery tray with quick-disconnect buckle secures a single group 24 battery

11-3/8 in. L x 7-5/16 in. W x 1-1/2 in. H

Ideal for applications that do not require batteries to be completely encased.

Includes lift-off lid, durable woven hold-down strap, foot clamps and stainless steel screws

Lightweight, heavy-duty corrosion-resistant polypropylene box

Fits group size 27, 30 and 31 batteries

Includes lift-off lid, durable woven hold-down strap, foot clamps and stainless steel screws

Lightweight, heavy-duty corrosion-resistant polypropylene box

Fits group size 27, 30 and 31 batteries

1-1/2" wide x 39" long

Includes hardware to attach to battery box

Made of woven polypropylene

Includes lift-off lid, durable woven hold-down strap, foot clamps and stainless steel screws

Lightweight, heavy-duty corrosion-resistant polypropylene box

Fits group size 24 batteries

Heavy-duty battery box for 6-volt marine, RV, boat, camper, and travel trailer batteries.

Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation.

Built for rugged environments with an impact resistance down to minus 20-degrees Fahrenheit, and unaffected by acid, gas, oil, as well as, UV exposure.

This battery tray is designed to securely mount your battery in your vehicle using sturdy base plates and hold-down plates and includes heavy duty 3/8" hardware

Bottom tray will accept batteries up to 10.5" Length x 6.95" width x 6.7" height with provided thread sleeves(batteries over 7.4" tall will require longer 3/8-16 all-thread).

Compatible with Most Car and Truck batteries including the following optima sizes: Red top: 34, 34R, 34/78 & Yellow top: D34, D34/78 & Blue top: 34M, D34M (may fit other optima battery sizes)

BATHROOM COUNTER ORGANIZER – Toothbrush holders and other accessories help keep your space clutter free; iDesign toothbrush holder has a three-compartment design to hold regular and electric toothbrushes, toothpaste, floss, water flossers, and more

INCLUDED LID – Keep your brushing routine clean and bacteria free with the tooth brushing holder with lid; toothbrush and toothpaste holder is made of durable, transparent plastic with a lid to keep items clean

IDEAL SIZE – Regular and electric toothbrush holder measures 3.32" x 4.73" x 8.15" to perfectly hold toothbrushes on your counter without taking up too much space; toothbrush holders for bathrooms are top of the list of bathroom must haves

ORGANIZE YOUR HOME: Store your makeup brushes, cosmetics, deodorant, razors, tweezers, floss, contact lens, rings, earrings, bracelets, necklaces, paperclips, tape, and other craft and office tools. Ideal for storing items on or in your counter, vanity, dresser, nightstand, or desk in your bathroom, bedroom, kitchen, office, or craft room

MUTLIPLE COMPARTMENTS: Features 5 compartments for ample storage space

STURDY: Plastic feet ensure stability so your tray won't slide around the countertop

Secures your Battery Box: Helps keep your automotive, RV and marine batteries safe during travel

Compatibility: Compatible with all Camco battery boxes

Dimensions: Adjustable strap measures 48-inches (L) x 1 ½-inches (W)

Heavy-duty, Non-corrosive black plastic. Inside Dimensions: 12-5/8 inch x 7-1/4 inch x 8-1/2 inch (WxDxH). Fits 27/27M Series Batteries

Heavy-duty, non-corrosive black plastic

Install with number 10 screwsMeets ABYC standard E-10 and U.S. coast guard requirements

This battery tray is designed to securely mount your Optima battery in your vehicle using sturdy base plates and hold-down clamps and includes heavy duty hardware

Compatible with common Optima battery sizes: Red top: 34, 34/78 (DOES NOT FIT 34R) & Yellow top: D34, D34/78 & Blue top: 34M, D34M (may fit other Optima battery sizes)

Made in the USA from aerospace grade billet aluminum

Fit type: Universal Fit

Constructed from lightweight steel material

Product type :AUTO PART

Reliable battery holder that fits into limited spaces

Simple to install

For 29/31 Series battery up to 10 1/2 inches tall

Ultra-durable and strong polypropylene webbing strap to secure your battery

Ideal for securing battery boxes and other equipment

Polypropylene strap is waterproof and resistant to rot and acid

Relocate the battery from tight locations to where you have more room, or to improve weight distribution with a secure and economical bolt-in solution

Will hold a battery up to 10-5/8" x 7-1/16" up to 7-1/2" high

Mounting holes are 12-5/8" center to center, side to side, top to bottom hole is 5" on center with 1" optional mounting holes in between 1" on center

SPACE SAVING DESIGN - marine battery tray is designed using the smallest possible dimensions to help with tight space issues

RECESSED MOUNTING WELLS - uses low profile mounting wells and fasteners instead of bracket tabs to make installation in small spaces easier

UNIVERSAL FIT - box fits most series 29/31 boat, RV, and trolling motor batteries - poly strap features strong quick-release buckle to hold the battery firmly in place

Secure replacement - this battery hold down replaces a worn, stripped or missing original equipment hold down

Maintains battery - reducing battery movement helps ensure maximum battery life

Check fit - to see if you have correct hold down, check application fit, size or style

Direct replacement - this battery tray matches the fit and function of the original equipment part

Durable construction - this battery tray is made from quality materials to prevent damage caused by an unsecured battery

Cost-effective solution - offers original equipment quality at lower cost than dealer replacement

Ideal for relocating a battery to the rear of any race, street, or show vehicle with or without a rear firewall

Fit Type: Universal Fit

Package Dimensions: 26.924 H x 36.068 L x 31.496 W (centimetres)

Commercial Grade - Designed to accommodate two (2) 6V batteries, including automotive, marine, RV, and other commercial batteries.

Rugged Design - Four corner fastening system and captive lid for easy installations, large cable entry holes for large gauge cables, full flow ventilation for releasing battery gases, and a battery acid reservoir.

Designed for Rugged Environments - Impact-resistant down to minus 40 degrees Fahrenheit, withstands acid, gas, oil, and other contaminants, and immune to UV exposure.

Secure replacement - this battery hold down replaces a worn, stripped or missing original equipment hold down

Maintains battery - reducing battery movement helps ensure maximum battery life

Check fit - to see if you have correct hold down, check application fit, size or style

PLEASE MEASURE YOUR WALKER CAREFULLY AGAINST OUR MEASUREMENT DIAGRAM, AS EVERY WALKER CAN BE DIFFERENT - Fits most standard walkers, where tray fits down lower on the handle than other brands for stability. Overall dimensions = 21.125" x 16.25". Handle slots = 2" wide x 11.75" long. Between handle slots = 16.25". Walker coffee cup holder = 2.625" diameter each.

TURN YOUR WALKER INTO A CONVENIENT TV TRAY - Easy to use walker caddy hugs the handles of your walker, creating a stable and convenient surface that's large enough to hold your entire meal.

FEATURES YOU WANT - Walker caddy features a durable plastic base with a two built-in walker cup holder top, removable non-slip mat that prevents items from sliding, and wider, precision-cut slots that fit most walker handles.

PLEASE MEASURE YOUR WALKER CAREFULLY AGAINST OUR MEASUREMENT DIAGRAM, AS EVERY WALKER CAN BE DIFFERENT - Fits most standard walkers, where tray fits down lower on the handle than other brands for stability. Overall dimensions = 21.125" x 16.25". Handle slots = 2" wide x 11.75" long. Between handle slots = 16.25". Walker coffee cup holder = 2.625" diameter each.

TURN YOUR WALKER INTO A CONVENIENT TV TRAY - Easy to use walker caddy hugs the handles of your walker, creating a stable and convenient surface that's large enough to hold your entire meal.

FEATURES YOU WANT - Walker caddy features a durable plastic base with a two built-in walker cup holder top, removable non-slip mat that prevents items from sliding, and wider, precision-cut slots that fit most walker handles.

Holds Batteries in Place: Safely holds group 24/24M automotive batteries to stop movement during transportation.Fit Type: Universal Fit

Safe and Durable Construction: Constructed of heavy-duty, acid defiant plastic with stainless steel hardware

Fit: Fits batteries up to 11 1/8-inches (L) x 6 ¾-inches (W) x 8-inches (H)

EASY CLEAN-UP – A removable mesh grate makes cleaning easy. To keep the area sanitary and minimize odor, we recommend washing with soap and water daily. The fast drainage system helps keep paws clean and dry. An enclosed pee pad holder saves you from puppy training mischief. No more torn pee pads!

CONVENIENCE - Ideal for people with long working hours. This easy at-home solution offers you and your dog the flexibility to stay in-doors for early mornings, late nights and during cold, rainy, and snowy weather. This reusable product saves you time and energy. Simple set-up, no assembly required.

MODERN SLEEK LOOK - Versatile design, smooth edges, beautiful shine. We offer 4 color variations: black, grey, pink, and blue. The raised edges protect carpets and floors from spills. Includes 4 foam buttons to place underneath to prevent sliding and scratches.

PLEASE MEASURE YOUR WALKER CAREFULLY AGAINST OUR MEASUREMENT DIAGRAM, AS EVERY WALKER CAN BE DIFFERENT - Fits most standard walkers, where tray fits down lower on the handle than other brands for stability. Overall dimensions = 21.125" x 16.25". Handle slots = 2" wide x 11.75" long. Between handle slots = 16.25". Walker coffee cup holder = 2.625" diameter each.

TURN YOUR WALKER INTO A CONVENIENT TV TRAY - Easy to use walker caddy hugs the handles of your walker, creating a stable and convenient surface that's large enough to hold your entire meal.

FEATURES YOU WANT - Walker caddy features a durable plastic base with a two built-in walker cup holder top, removable non-slip mat that prevents items from sliding, and wider, precision-cut slots that fit most walker handles.