Best Gthan in 2026

[Safe and Reliable]:GTHAN Gas Chainsaw is designed with dual throttle switches, which need to be pressed at the same time to start, which can effectively prevent accidental starting. The high-quality brake baffle can make emergency braking, which can effectively protect your hands and ensure your safety during use.

[High Powerful Engine]: Gas chainsaw is equiped with the latest 2-stroke cycle engine, which is high efficiency, high power, reliable work, and long life.The average specific fuel consumption of the engine is lower than that of the original engine by about 20%.The chainsaws Suitable conquer tree felling, wood cutting for lumberman’s in the forest or other use.

[Automatic lubricating System]:GTHAN 20" Gasoline Powered Chain Saw Equipped with an automatic filter system,to prevent the dust from entering into the engine,reduced fuel consumption. Automatic lubricating system, reduces the friction between the quiding board and the chain, prolongs using life.(Note :some oil will residue on chains and back flow on the bottom of clutch then drip oil. This is a common phenomenon for all kinds of chainsaws, not defective).

[Safe and Reliable]:GTHAN Gas Chainsaw is designed with dual throttle switches, which need to be pressed at the same time to start, which can effectively prevent accidental starting. The high-quality brake baffle can make emergency braking, which can effectively protect your hands and ensure your safety during use.

[High Powerful Engine]: Gas chainsaw is equiped with the latest 2-stroke cycle engine, which is high efficiency, high power, reliable work, and long life.The average specific fuel consumption of the engine is lower than that of the original engine by about 20%.The chainsaws Suitable conquer tree felling, wood cutting for lumberman’s in the forest or other use.

[Automatic lubricating System]:GTHAN 20" Gasoline Powered Chain Saw Equipped with an automatic filter system,to prevent the dust from entering into the engine,reduced fuel consumption. Automatic lubricating system, reduces the friction between the quiding board and the chain, prolongs using life.(Note :some oil will residue on chains and back flow on the bottom of clutch then drip oil. This is a common phenomenon for all kinds of chainsaws, not defective).

5 in 1 safety helmet comes with helmet, adjustable/removable earmuffs, plastic visor, and mesh visor, providing dynamic protection for any job

Provides the protection you need when using chainsaws, brush cutters, and trimmers, ideal for forestry type work.Noise Reduction:SNR 26dB

Secures firmly on head and convenient dial knob makes it easy to adjust the circumference 20 - 24.5 inches (52-62 centimeters)

HIGHEST CUT PROOF. Protect your hands from cuts and punctures while handling sharp metals, knife, blade, glass, plastic sheet, paper, construction materials, mandolin slicer, and cutting meat. Qualified CE EN 388 4544, ANSI Cut A4

COMFORTABLE ALL DAY LONG. Cru553 work gloves fit snug without constricting your fingers. Their 13-gauge cool yarn is made of HPPE and Spandex to give you second-skin dexterity, precision and protection

HIGH PERFORMANCE IN ALL CONDITIONS. Need to grab slippery tools or knives? Our foam nitrile rubber coating is anti slip even on greasy or wet surfaces. Water based and touchscreen friendly, it passed the FDA food contact coating test

1000 Denier Polyester with PVC coating with Tek Warp Protective Layers

Adjustable Waist Size to 42 Inches

Felling Wedge/Gear Pocket and Acetal Delrin Buckles. Wash in cold water mild detergent and hang to dry. Never use chlorine bleach

Chain fits these chainsaw models with a 10" bar: Craftsman - 315.341300, 79240 & 79245 Pole Saw, 358.34550, CR2500A Cordless, 315.34131 Husqvarna - 436 LI, T536 LiXP, 536 LiXP Echo - CS-271, PPT-2620, PPT-2620H, PPF-2620

Also fits: EGO MPS1001, Makita XCU06SM1, PowerSmart PS76120A-DP2, Ryobi - P540, P540A, P542, P543, P545, P546, P547, RY52003, and more. Made in the U.S.A. - Limited Lifetime Warranty

Designed for homeowners and landscapers: 10 inch (25cm) chainsaw chain, for models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 40 drive links

VERSATILE APPLICATIONS - Perfect for power tools, construction, motorcycling, tactical and DIY heavy-duty works that require higher protection

IMPACT & VIBRATION REDUCTION - 3D-structured PVC patches on the back for great impact protection; High dexterity EVA padding offering stereoscopic vibration

180° COVERED FINGERTIPS W/3D CUTTING - 45° angle cut at the finger junctions and pre-curved fingers ensure a tailored fit with amazing flexibility, breathability & comfort

2 x durable, low-kickback, low-vibration chains help reduce user fatigue for increased periods of work- For all chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 56 drive links

Fits these chainsaw models with a 16" bar: Craftsman:CMECS600, S160, S165, CMECS600; Earthwise CS30116, CS33016; Homelite ZR43100, UT43123; Husqvarna 240, 135, 120 Mark II;

Also fits: Makita UC4051A, XCU03, XCU04CM; Oregon CS1400; Poulan PR4218, PL1416, PL3816; Remington RM1645; Ryobi RY3716; Sun Joe SWJ701E; Wen 40417, and many more; see description and images

Oregon premium AdvanceCut chainsaw chain: Replacement chain for 8" (20cm) guide bar, 34 drive links, pitch: 3/8" low profile, gauge: .043", narrow kerf. For saw chains and pole saw sizes up to 42cc

Pole saw chain fits several chainsaw models, including: Craftsman CMCCSP20M1, DeWalt DCPS620/B/M1 20V, Poulan PR28PS, Oregon PS250, Ryobi PP720R, Worx WG310, Black & Decker, Troy-Bilt & more

Featuring Oregon’s special LubriTec oiling system: Keeps your chain and guide bar automatically oiled, for less friction and longer life. Top-plate filing indicators make accurate sharpening easier

Professional interlocking fiberglass poles used by professional tree care companies in the US along with home owners

Set includes (3) 6 ft fiberglass poles & 15" heavy duty double thick blade

Rust resistant chrome plating and impulse hardened teeth hold sharpness on blade edges longer, 8" Cut Capacity

Makita-built outer rotor BL Brushless motor direct-drive system provides high power efficiency equivalent to a 32cc gas chain saw

Variable speed trigger and high chain speed (0-3, 940 FPM) For improved cutting performance

"Tool-less" chain adjustment for convenient operation and maintenance. Chain pitch: 3/8 inch

Oregon premium AdvanceCut chainsaw chain: Replacement chain for 8" (20cm) guide bar, 33 drive links, pitch: 3/8" low profile, gauge: .043", narrow kerf. For saw chains and pole saw sizes up to 42cc

Pole saw chain fits several chainsaw models, including: Makita XCU05, XCU06, Ryobi P4360, P4361, P5452BTL, RY43160, Worx WG349. Replacement for Stihl 61PMM333E and Husqvarna H38-33 chain

Featuring Oregon’s special LubriTec oiling system: Keeps your chain and guide bar automatically oiled, for less friction and longer life. Top-plate filing indicators make accurate sharpening easier

Fits these chainsaw models: Stihl: 024, 026, 026P, 028, 029, 030, 031, 032, 034, 036, MS 260, MS 270, MS 271, MS 280, MS 290 and more

The low-vibration, low kickback chain offers outstanding performance. .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 81 drive links

Designed for occasional chainsaw users including property owners and landscapers

This replacement 16" chainsaw bar and chain combo allows you to replace your bar and chain and upgrade your chainsaw to keep it working smoothly

This chainsaw bar and S55 chainsaw chain fit a wide range of Stihl chainsaw models up to 42 cc, including the MS 170, MS 180, and MS 180 C. Guard Mate Compatible-No

The S55 16" chainsaw chain features Oregon’s special LubriTec oiling system, which helps to keep your chain and guide bar automatically oiled, for less friction and a longer life

Oregon AdvanceCut premium chainsaw chain: Replacement chain for 8" (20cm) guide bar. Drive Links: 33, Pitch: 3/8" Low Profile, Gauge: .050". For chainsaw and pole saw sizes up to 42cc

This chain fits a variety of electric & battery pole saw models with an 8" bar, including Greenworks PSPH40B00, Sun Joe SWJ800E, SWJ801E, & SWJ806E, Wen 4019 Telescoping Pole Saw, and Wen 4021

Replacement for Husqvarna H37-33 and Stihl 63PM333E. Features Oregon’s LubriTec oiling system, which helps keep your chain and guide bar automatically oiled for less friction and longer life

Durable, low-kickback, low-vibration chain helps reduce user fatigue for increased periods of work. 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 52 drive links

Fits these chainsaws with a 14-Inch bar: Craftsman S145, S1450, CMECS614, Echo CS310, Greenworks 12A Electric 20022 & 20232, 2020902ME, Homelite ZR43100, UT43104, Lynxx 14" 63287, 64715, Worx WG305

Also fits: Harbor Freight Portland 14" saw, Husqvarna 240, 120i, 135, 120 Mark II, Makita UC4051A, XCU03, XCU04, Poulan PR4218, PL3314, Ryobi RY3714, RY40530, RY40503, Sun Joe SWJ699E, SWJ701E

Durable, low-kickback, low-vibration chain helps reduce user fatigue for increased periods of work- For all chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 62 drive links

Fits these chainsaw models with an 18" bar: Atlas 56937, Craftsman CMXGSAMCN4218, S185, ECHO CS310, Ego CS1800, CS1804, Greenworks GCS80420, Husqvarna 240, 120 Mark II

Also fits: Homelite ZR43100, Masterforce 2000094ME, Poulan PR4218, Remington RM1645, Ryobi RY3818, RY40580, RY40580, Sun Joe SWJ701E, and more; see product images and description.

This replacement 14" chainsaw bar and chain combo allows you to replace your bar and chain and upgrade your chainsaw to keep it working smoothly. Guard Mate Compatible-No

This chainsaw bar and S50 chainsaw chain fit a wide range of Stihl chainsaw models up to 42 cc, including the MS 170, MS 180, and MS 180 C

The S50 14" chainsaw chain features Oregon’s special LubriTec oiling system, which helps to keep your chain and guide bar automatically oiled, for less friction and a longer life

Packaged in the USA NOTES: just replacement chain

Fits Models:Harbor Freight, Chicago, Portlan, Greenworks

Earthwise : PS40008 Pole Saw, CCS30008 18 Volt, CPS40108, CVPS41008, LPS40208, NVPS42108

Fits these chainsaw models: Stihl: Stihl 025, MS230, MS 241 C-M, MS 250 C and C-BE, and MS 251 and more

The low-vibration, low kickback chain offers outstanding performance. For saw sizes 38-62 cc that run .325 Inch Pitch, .063 Inch (1.6 mm) gauge, 68 drive links

Designed for occasional chainsaw users including property owners and landscapers

Fits several chainsaw models including but not limited to: 【Echo】CS-452, CS-550EVL, CS-590, CS-600P, CS-620P, CS-650EVL, CS-660EVL, CS-670, CS-680, CS-750, CS-6700, CS-8000【Poulan】330, 3400, 3450, 3700, 5200, PP5020

Also fits:【Homelite】Super XL, Super XLAO, XL 12 【McCulloch】10-10A,Pro Mac 610, Pro Mac 650, Pro Mac 700; See image of back of package for a list of saw models this chain fits

Ideal for DIY homeowners – Capable of handling tough jobs; Ideal for home yard work and cutting storm damaged trees; Cuts smoothly, semi-chisel chain is more tolerant of dust and dirt; Engineered for safety, meets UL and ANSI low kickback requirements

Durable, low-kickback, low-vibration chain helps reduce user fatigue for increased periods of work- For all chainsaws brands that run 3/8 Inch Pitch, .050 Inch (1.3 mm) gauge, 40 drive links

Fits these models with 10" bar: Echo CS-271, CS280, CS290, CS300 and CS3000, Harbor Freight Bauer 64940, Sun Joe SWJ803E Pole Saw, Greenworks 20262 with 10" bar, Remington RM1025SPS, RM1025P, and many more

Precision, heat-treated semi-chisel chain duo cuts smoothly with a higher tolerance for debris. Made in the U.S.A. - Limited Lifetime Warranty

Includes one quart bottle of Husqvarna X-Guard Premium All Season Mineral Bar and Chain Oil

Optimal Performance: Husqvarna premium bar and chainsaw oil optimizes your saw's cutting performance by reducing heat and friction even in the most extreme conditions

Virgin Base Stock Oils: A premium blend of base stocks and tackifier additives reduce high-speed throw-off and ensures lubrication is maintained on the cutting equipment for optimal performance

Fits these chainsaw models: Craftsman - 98023, CMCCS620, CMCCS620M1 Dewalt - DCCS620B, DCCS620P1 Kobalt - KCS 1224A-03, Makita - EA3200S, EA3201S, EA3500S, EA3500SRDB, EA3501S, XCU03, XCU04

Designed for homeowners and landscapers, the low-vibration, low kickback Chamfer Chisel cutters offer outstanding performance. For chainsaw models that run 3/8 Inch low-profile pitch, .043 Inch (1.1 mm) gauge, 45 drive links

Precision, heat-treated semi-chisel chain cuts smoothly with a higher tolerance for debris. Tough, long-lasting chrome outer layer and hardened rivets help reduce wear and chain adjustments

【EXCELLENT MATERIAL AND DESIGN】-This heavy duty gloves is made of 100% split cowhide leather and 100% cotton lined, which makes it have High abrasion, puncture resistant, high temperature resistant, cut resistance, high flexibility and comfort. The reinforced palm provides extra protection. The adjustable wrist can prevent dirty small things from entering the gloves. When your hands sweat, you don't have to worry about it dyeing your hands. I think you can imagine all this

【WIDE RANGE OF APPLICATIONS】-This husky gloves can be used in many works: garden work, welding, construction, farm, ranch, barn, Truck driving, florist, landscaping, electrician, demolition, woodworking, driving, grinding, wood cutting, yard garage shed and warehouse work，etc. You can also use it to BBQ, DIY, use the chainsaw and lawn mowers, moving rock, handle the burning fireplace and wood stove, handling wood, barbed wire, iron, etc. XLarge, Large, Medium, Small, 4 Sizes Available

【EXCELLENT THORN PROOF AND WEAR RESISTANCE】-You can use it when weed pulling, using weed wacker, digging, sowing, mixing fertilizer, landscape, potting, pushing the lawn mower or wheelbarrow, pruning, etc. You don't have to worry about being hurt by plants with thorns, such as rose, cactus, wild thistle, poison ivy and oak, bougainvillea thorn, blackberry bushes, palm trees, citrus trees, miniature conifers, Stinging Nettle plants, thorny weeds, many barberry plants, other prickly vegetation.

Fits saws with up to 20 inches bars and chains.

Fits all Echo model saws up to CS-8000 with 20 In. bar.

Heavy duty bag made of nylon

【German brushless motor design】Compared with brushless DC motors, brushless motors have many advantages, including providing greater power and torque, super power, higher cutting efficiency, faster speed and longer service life . 2PCS high wear-resistant chain: using high-quality guide chain, through deep quenching process, to ensure smoother cutting and more wear-resistant.

【Efficient cutting】cordless chainsawIt only takes about 3 sec=onds to cut a log with a diameter of 3 inches, and the chain speed is as high as 22.6FT/s, cutting trees efficiently! Easily transform your yard or garden. (The specific value varies from person to person, and the actual size and hardness are different).

【Large Capacity Battery Pack】21V removable rechargeable 2000mAh lithium battery provides longer battery life, no memory loss after charging, and has self-overload and temperature protection functions.

Includes one Husqvarna SP33G 18 Inch Chainsaw Chain Replacement compatible with the following Husqvarna chainsaw bar models: Husqvarna 450 Rancher, 460 Rancher, 435(E), 440(E), 445(E), 543XP and 550XP(MII)

Excellent Precision and Maneuverability: These chainsaw chains give your gas chainsaw excellent precision and high cutting efficiency to improve maneuverability while reducing strain and fatigue

Semi-Chisel Chain: Husqvarna chainsaw chains 18 inch replacements use a semi-chisel chain that is easy to file and stays sharper longer, with 72 drive links, a .325" pitch and .050" gauge

Compatible with EGO 14”, 16” & 18" Chain Saws

Made of rugged, weather resistant canvas

Resists abrasion and wear to protect and carry your EGO Chain Saw

Genuine OEM Husqvarna parts

X-CUT C83 Chainsaw Chain Full chisel, 3/8" pitch, .050 gauge

24"; 3/8"; .050"; 84 Drive Links; File size: 7/32