Best Hao Pro in 2025

Better grip:Old,flat style cotter pins will almost always break after 1 or 2 reuses because you have to bend them,but our R clips can do better.Just pull them out and when ready,push back in.Good tension and nice 'grab tab' bend design can bring you better grip and less headaches.Even rolling RC cars couldn't make the pins come out.

Hold tight:If your storm door "actuator" pin broke,it will causing the door slam open or close constantly.Now you have an easy solution as using this cotter pin to reattach the 2 pieces,bring the door back to functional so you could use it again.It will remain shut down when the wind get dramatic,much sturdier and better than it was before.

Pull easier:They do the job and are easy to put on and pull off.Gone are the days hunting a tool to remove pins,now all you need to do just a quick pull of the finger and out it comes!Slight angle makes it easier to remove and install,convenient for adjusting.The way that the end curved up helps you pull it easier and works as expected.

SIZE:fit the 2 inches wide strap.Buckle itself’s length:3.4”,wide:2.3”,thickness:0.7”.

Dual-side Adjustable,NO Sewing:You can adjust the strap on both sides.The regular quick side release buckles require you to sew one of them in place,no sewing is needed with these!Because both the male and female side of the buckle has two slot to feed the strap through.

These buckles are upgrades,better than normal 1” buckles: Extra thick strong,extra long,fit thicker strap.

Multi-fonction:Perfect quick release buckles for nylon webbing straps,for putting new clips on boat cover.Great for replacing the piece on the backpack and fanny Pack straps,belt dog collars and boat cover.Good locking buckles for fixing a broken buckle.Also they can replace the waist strap buckle on a hiking backpack baby carrier.Stronger than the original!

Dual-side Adjustable,NO Sewing:You can adjust the strap on both sides.The regular quick side release buckles require you to sew one of them in place,no sewing is needed with these!Because both the male and female side of the buckle has two slot to feed the strap through.

Multi-function:Perfect quick release buckles for nylon webbing straps.Great for replacing the piece on the backpack and fanny Pack straps,belt dog collars.Good locking buckles for fixing a broken buckle.Also they can replace the waist strap buckle on a hiking backpack baby carrier.Stronger than the original!

Heavy-duty:Strong plastic,stays clipped under all reasonable loads.Strong clasp rated at 35lbs.No slipping with either standard weight or heavy duty webbing. Hold tension well.

Larger diameter:The large diameter makes turning the lamps on and off like a breeze, even when your hands are aching.Not only do they make the lamp look much better than the ordinary switchs that are originally on the lamp,the shape is much easier to use and doesn’t slip out of your finger.

Fix in a snap:Just what you are looking for to upgrade some vintage lamps.Tired of being in the dark?These will fits a standard lamp with no problem instead of having to replace the whole unit inside the lamp.It’s a “lamp” saver.Now you can turn your lamps on and off with confidence!

Solid Carbon steel:The metal looks nice and will hardly ever split at the threads,leaving you without light.After getting the rest of the old split knob off,this new knob will stay in shape.You just screw it on to the existing threads.

Stay fastened.Good holding strength,won't pop off.Can't pull it apart with fingernails.Make a small hole in the fabric insert stud and press firmly together with your hands.When they snap together you can see they stay there.With sutures,it will become stronger.

Cut through cleanly.The seams of the rivets are crimped cleanly.Use these rivets as decorations on a pair of jeans,and they won't harm the fabric or cause puckers.The rivet setter is a good length and the knurling allows for good grip on it.

Hard to dent and bend.The rivets don't bend if you hammer them.They will stay rounded.They are lightweight but not easy to deform.Using an awl to make the hole had the benefit of not cutting the fabric edges and keep the edges of the hole from fraying and make the placement more permanent.

Dual-side Adjustable,NO Sewing:You can adjust the strap on both sides.The regular quick side release buckles require you to sew one of them in place,no sewing is needed with these!Because both the male and female side of the buckle has two slot to feed the strap through.

Heavy-duty:Strong plastic,stays clipped under all reasonable loads.Strong clasp rated at 66 lbs.No slipping with either standard weight or heavy duty webbing. Hold tension well.

SIZE:fit the 1 inch (25mm) wide strap.Buckle itself’s ength:2.4”(61mm) , wide:1.2”(30mm) , thickness:0.4”(10mm) .

Quick release:Quick release buckles are great for their speed and lightness.These can work just fine and hold up on hikes and a winter trip.Have them set up so you can quickly change between camera strap,harness,and back packs as needed and they keep hold up.Makes it easier to ties and release,work well for children and adults as not to big not to small.

Apply easily:The feature of the double loop at each end comes with the buckles.They hold tight without sewing.Easy to work with and make all kinds of straps when you use the proper webbing.Simply just pinch down and release,not only you can use these from time to time for cinching nylon web straps,but you can using them to make custom lanyards.

Hold tight:If you need to make straps to hold the camping canopies on your new tent harnesses,these can combined with some nylon webbing to cleverly use in several places to hold down buckles on the tent.These can hold sturdy even in the week's gusts up to 50 mph!Constant motion cause almost no sign of stress or slippage,stays clipped under all reasonable loads.

Strong spring:The spring inside of these cord locks can holds them well yet still easy to press open,not too tight or too loose.No slippage in the use for sewing projects for bags,the spring is strong enough to hold different strings you insert into the opening.It stays at your adjustment,simply pull it off by squeezing the spring.

Easy to use:These makes drawing the strings tight much easier.A drawstring pants that often falls down if not tied can be a problem for kids at school.These locks are easy to load and operate,also good for elder people with arthritic hands.Putting it on or taking it off takes just seconds,and can be done with just one hand.

Adjustable:Snug hold,but fairly easy to adjust as needed.No-tie laces are not enough to hold up,it become loose over a few wears.But these locks can make adjustable fitting shoe laces.To tighten down shoe laces rather than waste your time and tying them all day.These locks allows the laces to cinch in tightly,and release when desired.

Quick release:Quick release buckles are great for their speed and lightness.These can work just fine and hold up on hikes and a winter trip.Have them set up so you can quickly change between camera strap,harness,and back packs as needed and they keep hold up.Makes it easier to ties and release,work well for children and adults as not to big not to small.

Apply easily:The feature of the double loop at each end comes with the buckles.They hold tight without sewing.Easy to work with and make all kinds of straps when you use the proper webbing.Simply just pinch down and release,not only you can use these from time to time for cinching nylon web straps,but you can using them to make custom lanyards.

Hold tight:If you need to make straps to hold the camping canopies on your new tent harnesses,these can combined with some nylon webbing to cleverly use in several places to hold down buckles on the tent.These can hold sturdy even in the week's gusts up to 50 mph!Constant motion cause almost no sign of stress or slippage,stays clipped under all reasonable loads.

Maintain the plump body well.The cute paper lantern will hold up during rain,not easy to be ripped.They are open on the top and the bottom so if they are hung up and you look up you will see right through them.

Hang up the beauty.Look fabulous and romantic in the dark.Putting a light source inside will make the lantern emit a soft glowing light,suitable for various kinds of spacious room.The soft light and appearance that won't bother you to replace it frequently.It will upgrade the room style and reflect with the warm and sweet lights.

Easy to put together and take down for storage.Collapsed easily for storage once done.Can be able to use over and over again and store them flat.You can hang it on the table to hide the patch.Please take care when putting the wire shaper in them. Tip:The paper lanterns have no light source,you need provide your own.

Set the vibe:They look solid in color,but when the lights are inside of them,the warm,flickering glow shows the variation of thicknesses in the paper,which gives it a very rich look.Once filled with some mini candles or LED tea lights lit,they will provide a warm,natural glow.The luminaries are beautiful,makes the neighborhood look like a romantic wonderland when the entire street participates.

Unique cutouts:The cutouts on both sides are delicate and pretty!Just the right bag to let the glow of a candle show through clearly,you can see the flames dancing like a little firefly in between the hollow area.These did the double duty of letting the wind through and lit up the pathway down the aisle.The open cut design along with the weight of some sand can help the luminary stay in place.

Reuse-able:Perfect replacement for a carved pumpkin on Halloween!Left them open inside or outside the house overnight,they can still be fold back without any tears or holes.They dry out well under an absorbent fabric if they ever gets wet,simply add a book on top to weight them down.After that you will be able to fold them up after use and store them to be reuse for another festival.

COMFORTABLE GRIP. The handle on both the hitch pin and hitch pin clip are vinyl-coated to allow for more comfortable handling and a better grip

VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 trailer hitches

EASY TO HANDLE. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount

VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 2-inch or 2-1/2-inch shank and 5/8-inch pin hole to fit virtually any class 3, 4 or 5 hitch

EASY TO GRIP. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount

CORROSION-RESISTANT. Protected by a durable zinc-plated finish, this tow hitch pin maintains excellent resistance to rust and corrosion for longevity and hassle-free use every time

HEAVY-DUTY: 5/8in threaded pin fits 2in hitch receivers tow ratings up to Class IV (12,000 lbs max); REQUIRES HOLLOW SHANK tube tow equipment (not solid)

SILENT TOWING: Eliminates distracting hitch clanking, load sway, and absorbs shock loads

STATE-OF-THE-ART: 90-degree lock design swivels for user-friendly, no fumble access win tight hitch spaces; made with corrosion resistant chrome, stainless and hot dip zinc components

Designed to hold pin and wire in a constant radius

Made from a sturdy material

Withstands all weather condition

Hitch pin with a 2" shank and 5/8" pin hole matches with any ball mount or other trailer hitch accessories

Ideal fit for most class 3, 4, and 5 trailer hitches

105-degree bend of the trailer hitch pin provides a useful handle for use

Heavy duty pin assortment for tractors, trailers, mowers, trucks, 3 points, PTOs and parts

Kit includes Square PTO pins, Lynch pins and Cotter pins (Hairpin)

Includes 190 pieces of a wide variety of sizes for many applications

The Hitch pins are 4.5 long and 5/8 dia. The pins are 4 3/16" long from shoulder to inside of clip.

Stainless Steel Replacement Pin for the 2" and 2.5" Tow & Stow Receiver Hitch

Machined from stainless steel rod, these hitch pins are built to pull a serious load.

Comes with keeper clip

Manufactured from stainless steel for ultimate durability

Measures 5/8 x 4-1/2

COMFORTABLE GRIP. The handle on both the hitch pin and hitch pin clip are vinyl-coated to allow for more comfortable handling and a better grip

VERSATILE. The 1/2-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 1-1/4-inch shank and 1/2-inch pin hole, making this receiver hitch pin a perfect fit for most class 1 and class 2 hitches

EASY TO HANDLE. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount

ERGONOMIC ACCESS. Instead of a single hole, the grooved head of this trailer pin allows the hitch clip to be inserted at any perpendicular angle. It is easier to use and more ergonomic to install whenever needed

VERSATILE. The 5/8-inch diameter of this hitch pin is compatible with any ball mount or other hitch accessories with a 2-inch or 2-1/2-inch shank and 5/8-inch pin hole, making this receiver hitch pin a perfect fit for most class 3, 4 and 5 hitches

EASY TO GRIP. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount

Hitch pin with a 2" shank and 5/8" pin hole matches with any ball mount or other trailer hitch accessories

Ideal fit for most class 3, 4, and 5 trailer hitches

105-degree bend of the trailer hitch pin provides a useful handle for use

✔ Designed to Fit 2" receivers.

✔ 5/8 Inches Diameter with 3 1/4" usable length.

✔ 100% Made of Stainless Steel, will never rust or corrode. Brand new, top quality. Test Specifications exceed 30,000 pounds.

Better grip:Old,flat style cotter pins will almost always break after 1 or 2 reuses because you have to bend them,but our R clips can do better.Just pull them out and when ready,push back in.Good tension and nice 'grab tab' bend design can bring you better grip and less headaches.Even rolling RC cars couldn't make the pins come out.

Hold tight:If your storm door "actuator" pin broke,it will causing the door slam open or close constantly.Now you have an easy solution as using this cotter pin to reattach the 2 pieces,bring the door back to functional so you could use it again.It will remain shut down when the wind get dramatic,much sturdier and better than it was before.

Pull easier:They do the job and are easy to put on and pull off.Gone are the days hunting a tool to remove pins,now all you need to do just a quick pull of the finger and out it comes!Slight angle makes it easier to remove and install,convenient for adjusting.The way that the end curved up helps you pull it easier and works as expected.

Pin diameter: Ø 5/8 inch,Usable length: 4 inch

Overall length: 6.8 inch,"R" clip included

The vinyl coated handle is labor-saving and convenient to use。

VERSATILE. The 1/2-inch diameter of this hitch pin is compatible with any ball mount or other trailer hitch accessories with a 1-1/4-inch shank and 1/2-inch pin hole, making this receiver hitch pin a perfect fit for most class 1 and class 2 hitches

EASY TO GRIP. The 105-degree bend in this trailer hitch pin creates a useful handle for easier use and allows the pin to stay securely engaged in the trailer hitch and ball mount

CORROSION-RESISTANT. Protected by a durable zinc-plated finish, this tow hitch pin maintains excellent resistance to rust and corrosion for longevity and hassle-free use every time

Made from zinc plated steel,Vinyl coated head for durability

Please make sure you buy the right length and the right width.

This 1/2" diameter hitch pin features 2 retainer hole for included clip.

This 5/8" diameter hitch pin features 2 retainer hole for included clip.

Please make sure you buy the right length and the right width.

Made from zinc plated steel,Vinyl coated head for durability