Best Hardwarefactorystore.com in 2026

[Design]: 23 holes includes 5 holes tapped to 3/8-16 and others untapped Cross drilling design allows for efficient use of lower weight with maximum strength,

[Product includes]: ,Five stainless steel socket head cap screws,One hex key; Fitted Case

[Application]: Perfect for machinists, woodworkers, metalworkers, and more

[Size Range]: 1/2 - 1-11/16" by 1/16" intervals

[Matched pair height]: +/- .0001"

[Parallelism]: +/- .0001"

[SIZE]: Table Slot: 11/16IN, Stud Size: 5/8IN-11

[PACKING]: 24 studs; 4 pieces 3, 4, 5, 6, 7, 8" Long, 4 coupling nuts, 6 flange nuts, 6 T-slot nuts , 6 serrated end clamps, 6 step blocks, Wall Holder

[MATERIAL]: Made of high quality tool steel for long life and increased durability. All parts heat treated.

Precise measurement: Measurement range: 0 - 6''/ 0 - 150mm; Resolution: 0.01”/ 0.1mm; Accuracy: ±0.2mm/0.01”. Perfect and accurate caliper measuring tool for household/DIY measurement. Please choose stainless steel digital caliper for more accurate measuring

4 measuring modes: This digital caliper can be used to Measure inside and outside diameter, depth and step with two sets of jaws and a probe. Powered by battery, comes with a pre-installed battery and a spare battery

Inch/mm conversion: One button quick switch between two units: inch and millimeter, definitely save your time. The buttons are made of rugged plastic carbon fiber composites, durable and portable

Perfect for machinists, woodworkers, metalworkers, and more

Each block measures 3 by 2 by 1 inches in size

Features 5 threaded 3/8-16 UNC cross-drilled holes

Speed Up Your Woodworking Setup ... Set the height of your fence, blades, and bits in a fraction of the time. The Blockcision gauge block set comes with 16 precision setup blocks that can be combined to achieve hundreds of different measurements with ease.

Unique Ruler Markings for Quick Measurements ... You've just stumbled upon the only 16-piece setup block set with ruler markings on each bar. While other sets only mark the 123 block, we've graduated every single one to help you make measurements on the fly.

Work With Incredible Precision ... Whether you're setting up your table saw blade or router, next-level accuracy will be on your side. Blockcision bars are precise to ± 0.001” and allow you to make any measurement from 1/16” to 1” in 1/32” increments.

Workshop-grade set features 81 individual steel blocks of various sizes

Sizes range from .05 inches all the way up to 4 inches

Includes unique certificate of inspection following ASME B89.1.9 standards

81 pc Grade B Steel Gage Block Set with MFG'S certificate

Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. (20 C).

All gage block sets are assigned serial numbers and accompanied with a certificate of inspection listing the deviation for each block

This matched pair of blocks is ground to tolerances of .0001". 23 holes, 5 tapped 3/8"-16 TPI and 18 plain

Precision ground and case hardened on all six sides

Squareness of all sides is within .0002 per inch.

Squareness: 0.0003"

Made of hardened Steel with hardness of 56 - 60 RC

Size within +/- 0.0002", matched pair accuracy 0.0002"

Made of precision-grade tool steel hardened and ground on all 6 sides of block

Heat treated and case hardened to HRC 57-62

Accuracy and squareness on all sides within .0002"

Perfect for machinists and metalworkers; measure angles with maximum precision

Workshop-grade set features 12 individual steel blocks of various angles

Includes 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30-degree hardened-steel blocks

[Design]: 23 holes includes 5 holes tapped to 3/8-16 and others untapped Cross drilling design allows for efficient use of lower weight with maximum strength,

[Product includes]: ,Five stainless steel socket head cap screws,One hex key; Fitted Case

[Application]: Perfect for machinists, woodworkers, metalworkers, and more

Surface plates are checked by an auto-collimator for overall accuracy assurance.

Accuracy is 0001" Grade B(Grade 1).

Granite surface plates meet or exceed Federal Specifications GGG-P-463C.

In good condition, no highlights or writing in book. Practically new CD included

[Each Set Contains 1 Pair of the Height Listed]: 1/2, 5/8, 3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2 & 1-5/8‘’

[Material]: Made from high quality tool steel stress relief against distortion, precision ground and hardened

[Easy Handling]: Easier Handling because there are 2 holes in each one

With 23 Holes. Squareness: 0.0001". Parallelism: +/- 0.0001"

Height Accuracy in Pair: +/- 0.0001". Hardness: HRC 56-60. Oversize to allow nominal tapping

Finished from 6-16 micro inches. Nominal Tapping: 0.0001" to 0.0003". Surface finish

Accuracy with Squareness on all sides within .0001 per inch

Hardened and precision Ground on all 6 sides of each block; Includes Matched pair of 1-2-3 blocks with 23 holes, 5pc of 3/8 -16 Socket Screws, Hex key

Made in China

Part# 303-5311C

9 blocks: .1001-.1009" in .0001" steps

49 Blocks: .101-.149" in .001" Steps

Fit:Hardened and precision ground 1" x 2" x 3" Block Set. This matched pair of blocks is ground to tolerances of .0001". 23 holes (5 tapped 3/8"-16 TPI and 18 plain).

Package Include:1 Pair (2) 1-2-3 Block Set

BL-123

6pcs Adjustable parallel sets

Minimum Measuring Range (Inch): 3/8''; Maximum Measuring Range: 2-1/4''

Length range from 1-3/4" to 5" closed.; case INCLUDED

UNMATCHED PRECISION: Each block is machined to within 0.001" accuracy. Set up gauge blocks are all 3 inches long. Accurate sizes of each individual piece (15 total): 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 15/32", 1/2", 23/32", 3/4", 1x2x3".

EASY TO READ: This setup blocks is designed with unique brighter color and white labels on three sides. Super easy to read, perfect for table saw, router and other cutters. You can stack setup bars for additional sizes you need.

STURDY & DURABLE: These solid aluminum-alloy gauge blocks with anodized finish protect router bits and saws better. The aluminum alloy makes them lighter, durable, and corrosion resistant. Laser engraved mark won’t fade with time.

Used Book in Good Condition

81 pc Gage Block Set; Manufacturer Certificate; Grade AS-0

HIGH PRECISION; Manufactured under carefully controlled conditions; Recommended to use at a temperature of 20C (68F)

THOROUGHLY TESTED; Each gage block is tested for accuracy; Set comes with a certificate listing the deviation for each block; Tested according to ASME B89.1.9-2002 Federal Standards

Dimension - 2-3/8 x 2-3/8 x 2 --- 90 degree v-block pair with clamps.

Material - Made of hardened steel,Hardness: hrc 58 to 60.

Square and parallel to accuracy - 0.0002.

Grade 0 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish

High-carbon, high-chrome steel provides high hardness and wear resistance

Rectangular base for accurate wringing

STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use.

HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality.

VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice.

Can be used for checking spindle wear on outer diameter (OD) micrometers

Sized to check different degrees of spindle rotation

Steel blocks are made from high-carbon, high-chrome steel to reduce wear and corrosion

Grade 0 gage block supplied with a Mitutoyo certificate of inspection that the block meets American Society of Mechanical Engineers (ASME) B89.1.9-2002 standard for flatness, length, parallelism, and surface finish

High-carbon, high-chrome steel provides high hardness and wear-resistance

Square base for accurate wringing, to attain a height reference standard, and to make a dedicated inspection jig