Best Harmnee in 2026

♕【Technical Parameters】 Input supply voltage: DC 10V-55V; Maximum current: 60A; Continuous current: 40A; Speed range: 0%-100% ; Control frequency: 15KHZ; Apply to: DC Brush Motor

♕【Switch Function】The PWM DC motor speed controller come with switch function. High power speed controller switch which is much more adaptable and convenient to change the motor direction.

♕【Excellent Heat Dissipation Performance】 The enclosure of the speed controller for motor is an aluminum enclosure. Aluminum shell is very strong to prevent damage, holes on its side and top which are helpful for heat dissipation.

♕【Technical Parameter】Input voltage: AC 100V-120V; Input max current: 15amps; Continuous current: 8amps; Resistive load: 2000W max; Inductive load: 1000W max

♕【LED Display Screen】Show the real-time output voltage, make the machine working voltage visible

♕【15A Overload Protection Switch】The switch will power off automatically when momentary current is over 15 amps to protect the controller.The switch is also with indicator light inside

♕【Technical Parameter】Input voltage: AC 100V-120V; Input max current: 15amps; Rated current: 8amps; Resistive load: 2000W max; Inductive load: 1000W max

♕【LED Display Screen】Show the real-time output voltage, make the machine working voltage visible

♕【Precision Voltage Control】Adopt precision potentiometer to regulate voltage to control speed, heating and light easily, accuracy up to 1 volt

Comes Pre-soldered with XT60 Connector and 3.5mm bullet plugs

5.5v/4A UBEC (Very Efficient)- ESC can power receiver and servos

LiPo 2 - 6s (Cells), NiCd/NiMH: 5 - 18 Cells, 6.4v - 25.2v

Input voltage MAX: 2s - 3s Lip; 6 - 9 cell NiMH (2s only for Short Course Trucks)

ESC Size: L: 1.93" W: 1.48" H: 0.79" (1.96 oz.)

MOTOR Size: L: 52.7mm, Diameter: 36mm and M3 @ 25mm Mounting Holes.

Integrated two-stage low voltage detection for Lithium Polymer (LiPO) battery use with fully-proportional forward, reverse, and braking control

EZ-Set push-button setup with three programmable drive profiles: Sport, Race, and Training

High-capacity heat sink with efficient, low-loss MOSFET design and thermal shutdown protection

PART NUMBER: LG-ZJ07B in your LEGEND user manual; compatible with LEGEND truck Model with LED lights

EASY TO SET-UP: Excellent acceleration and linearity features, strong resistant current capability, good heat dissipation

SAFE DESIGN FEATURE: Low voltage cut-off protection / over-heat protection / throttle signal loss protection

Come with T-plug, XT60, EC3 connectors,14AWG silicone wire and 20pcs heat shrink tubes.

The perfect connector adapters for your RC ESC Lipo battery motor.

Include EC3 / XT60/ T-Plug Male & Female Adapter Connectors,meet your different needs.

Brushless power from the leader in aftermarket upgrades, the Sidewinder 4 builds upon Castle's most popular platform, the SIDEWINDER 1:10 SCALE SERIES.

The Sidewinder line of ESCs are our Sport-Class Surface Speed Controllers.  They're designed to withstand the most abusive environments while keeping your ride moving fast and cool.  They are sensorless and have loads of Castle Power!

CRYO-DRIVE TECHNOLOGY combines cutting-edge hardware and software advancements to significantly increase thermal performance by reducing the amount of time the ESC’s electrical components spend generating heat. Your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs.

RPM 73762 - Castle Creations Mamba X ESC Cage, Black

Features: Allows ESC to Run with or without a Fan, Encases ESC Body Only, Air Channels on Both Sides, Included is a Separate Encased On/Off Switch Mount that Bolts Directly to the Cage in One of Four Locations/Orientations, Fits in Stock Location on Traxxas Slash 2WD, Slash 2WD LCG, Slash 4x4, Slash 4x4 LCG, Stampede 4x4 and Rally, Will Also Work on Other Traxxas 1/10 Scale Models such as ( # 010-0155-00, # 010-0155-01, # 010-0155-02, # 010-0155-03, # 010-0155-04, # 010-0160-00, # 010-0160-0

Includes: (1) ESC Cage

Potentiometer cable（about 15CM） can be separated, with running stop brake function

Suitable for long hours of work:Circuit optimization design,stable

Adjust the motor smooth no noise no vibration,with power indication,wide duty cycle adjustment range

batterychemistry_LiPo, mpn_38010600, type_RCS-MOT-BL-ESC

❤ Musical Crab Toy ❤ The smart walking crab toy will emit dynamic music when escaping, and the crab's eyes will flicker with lights at the same time , which will bring children a different experience. Encourage the baby to crawl with the crab.

❤ Sensing Crawling Crab ❤ The walking crab baby toy will start to crawl with the happy songs, when it encounters an obstacle while moving, it will move in the opposite direction, babies like to chase or crawl after it. It also can encourage babies to sit up or remain in a sitting position for a long time to play with and explore.

❤ High-quality Material ❤ Crawling crab baby toy is made of high quality ABS material，sturdy and durable. Soft light protects eyes.Smooth edge, no sharp part,which is friendly for your baby. Make sure they don't get hurt while playing.

Input supply voltage: 1.8V-15VDC;

The maximum output power: 30W

The maximum continuous output current :2A

L298N main driving chip, high drive ability, small heating value, strong anti-interference capability.

Dual H bridge DC stepper module, more stable and higher work efficiency.

Size: 43 * 43 * 27 mm/1.69 * 1.49 * 1.06in

The input power range is dc6-28v; the maximum continuous output current: 3a; the maximum output power: 80W

The switch cable length 15cm/5.9in

Potentiometer with switch function

Pushbutton Control

44.5mm wide

Manufacturer: Schneider Electric (Telemecanique)

( QUICRUN 10BL120 SD ESC) 1/10th Touring Car/Buggy/F1/Drift Car, and etc.

Motor Limit: For 4-6 cells NiMH / 2S LiPo ≥3.5T (1/10 On-road), ≥4.5T (1/10 Off-road), For 8-9 cells NiMH / 3S LiPo≥8.5T (1/10 On-road), ≥10.5T (1/10 Off-road)

Battery; 4-9 cells NiMH, 2-3S LiPo

Voltage: 24V;

Frequency: 50/60Hz;

Electrical Connections: 6" Leads;

Reversing relay module. Powers any reversing motor equipment, can be used for any application that requires the ability to reverse motion

Support Momentary-action(Self-resetting) switch and Alternate-action (Self-holding) switch. For Self-resetting switch, when the switch is pressed the motor operates, and when the switch is released the motor stops.

Compact plastic case and wires connect for easy mount.

Product Name: Overload Protection Switch; Country of Manufacture: CHINA; Material: Plastic, Metal; Net Weight: 14g

Package Content: 1 x Overload Protection Switch; Brand: Assisi; Model: HS-R01

Main Color: Black, Red; Voltage: AC 125/250V 50/60Hz; Current: 20A

Spektrum Firma 85A Brushless Smart Esc / 4000Kv Sensorless Motor Combo, Spmxsemc02

Brand: Spektrum

Package Height: 6.61 Inches

The maximum matching 5-axis stepper motor driver

The two-stage signal processing, signal transmission smooth, powerful anti-jamming

Relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc

Package included: 1 x Stepper Motor Driver.

✿Stepper Motor Driver✿: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current.

✿The largest 32 subdivision of the 6 models are optional; Suitable for 4Wires, 6 wires and 8 wires stepper motor. it can control 2 phase stepper motor forward and reverse rotation, With 1-2, W1 -2 , 2W1 -2, 4W1 -2 phase excitation mode.

Smart all-in-one telemetry.Ideal for ages:14 years and up

Fast, powerful 32-bit ARM M4 processor

Waterproof, Aluminum heat sink for high efficiency

Suitable for Nema 17, Nema 23 and Nema34 Stepper Motor，2-phase hybrid stepper motors (Outer diameter: 42, 57,86mm).

Package: 1piece DM542

More informations, please refer to the last photo in this link.

【Motor Speed Controller】Ultra-low voltage dc motor governor with the chip model: NE555; Potentiometer with switch function; Use a 2A resettable fuse to protect the controller; Power-on indicator.

【High Performance】Input supply voltage DC 1.8V-15V. Maximum continuous output current 2A. Maximum output power 30W. Duty cycle adjustable 0%-100%.

【Secure Enough】The speed controller is equipped with a self-recovery fuse. When the current is too large, the fuse is automatically disconnected. After cooling, the fuse is automatically restored.

Input voltage: 220V AC

Output voltage: 50V-220V(Output voltage < = Input supply voltage)

The maximum output power: 2000W; The maximum output current :25A

Smart all-in-one telemetry

Fast, powerful 32-bit ARM M4 processor

Waterproof

Inside Hole Diameter:10-11mm

Aftermarket Parts

For TTR50 110cc 125cc 140cc 150cc 160cc Dirt Bike Pit Bikes Motocross