Best Hienolelu in 2026

Front Rear Driveshaft fits for 1/10 Traxxas Slash Platinum/Ultimate/VXL 4x4 /Traxxas Rustler VXL 4X4/Traxxas Stampede VXL 4X4/Traxxas Hoss VXL 4X4 4WD RC Car.

Axles for traxxas 4x4 with Increased crash resistance and long-lasting durability during the most extreme RC action, Solve the problem of drive shaft fracture,ensuring maximum durability and for long time service life.

Fits for traxxas slash 4x4 axles upgrades part made of high-quality Stainless Steelnot fear of speeding and jumping,high reliability, ensuring smooth transmission.The rc car upgrades parts highly increase the strength and precision.

Compatible with traxxas slash turnbuckles upgrade parts for Traxxas 1/10 Slash 4X4 / 2WD Short Course Racing Truck RC Car,Nitro Slash,Rustler 4X4 VXL,Slash 2WD Unassembled Kit,Slash 4X4 Platinum,Slash 4X4 Ultimate,Slash 4X4 VXL,Slash VXL,Slash,Stampede 4X4 VXL,Stampede VXL,Hoss 4X4 VXL,Replacement of Traxxas #1935 3644 3741A 3741X 3745.

If the connecting rod screw is loose, you could adjust them according to the suitable length of the rc car,fix the connecting rod on the car shelf and tighten the screws to solve the loosening problem.

Aluminum turnbuckles for traxxas package list:6 x Long Suspension Link (length from 69 to 91mm,(center to center); 1 x Short Suspension Link (approx. length from 38 to 50mm,(center to center),Accessories(As shown).

Compatible With 1/10 Traxxas 1/10 Slash 4X4 / 2WD RC Car,replace Traxxas #1935 3644 3741A 3741X 3745.

If the connecting rod screw is loose, you could adjust them according to the suitable length of the rc car,fix the connecting rod on the car shelf and tighten the screws to solve the loosening problem.

Aluminum turnbuckles for traxxas package list:6 x Long Suspension Link (length from 69 to 91mm,(center to center); 1 x Short Suspension Link (approx. length from 38 to 50mm,(center to center),Accessories(As shown).

Compatible With 1/10 Traxxas 1/10 Slash 4X4 / 2WD RC Car,replace Traxxas #1935 3644 3741A 3741X 3745.

The length of the Link Rods are adjustable,you could adjust them according to the suitable length of the rc car.It comes with screws ,it is easy to install and greatly solve the loosening problem!

RC turnbuckle package list:6 x Long Suspension Link (length from 69 to 91mm,(center to center); 1 x Short Suspension Link (approx. length from 38 to 50mm,(center to center),Accessories(As shown).

Proprietary Carbon-Fiber Ceramic Materials Enhance The Strength Of A Typical Ceramic Brake Pad Compound To Handle Heavier Loads. Rotor Material- Cast Iron

Low Dust Braking Validated Through On-Vehicle 3Rd Party Tests In Los Angeles, Showing On Average 30% Less Dust Versus Oe

Drilled & Slotted Performance Rotors For Maximum Cooling

Components are Engineered to Handle the Stress of towing, Hauling, Mountainous Driving, and Lifted Trucks

Dust-Free Braking Performance

Z36 Carbon-Fiber Ceramic formula Provides the Extreme Braking Performance Demanded by your Truck or 4X4

【Strong suspension system】The car is equipped with 4WD-shock absorber suspension system. The metal spring shock absorber is independently adjustable, which can ensure it has a strong anti-collision ability and a shockproof body, whether it is flying on a wide field or crashing and rolling on narrow terrain, the car can run smoothly and the body will not be damaged.

【Extreme RC car】This 4WD RC car is equipped with a high quality RC390 motor, which generates great power for the RC car. This is a great boost to the acceleration performance, making the RC car's top speed more than 40 km/h, which is more competitive in racing and gives you an excellent driving experience.

【PA chassis and reinforced body frame】The whole chassis of the RC truck is made of nylon, which has many properties, such as durability, chemical resistance, elasticity, insulation, etc. All these properties make the truck have better crash resistance and extend its service life. What's more, the body with high chassis can go over all obstacles.

【Front Light & Extra PVC Body Shell】The BEZGAR 1- HM101 RC Truck is equipped with a Headlight, which will be automatically turned on when the remote control truck is switched on which makes the RC Truck even more realistic. To a certain extent, the LED headlight can be used to locate the RC Truck and identify the heading direction of the RC Truck. It can even detect the terrain when there is insufficient light. The extra car shell brings you a fantastic driving experience.

【PA Chassis and Reinforced Body Frame】The whole chassis of the remote-control truck is made of nylon which is synthetic thermoplastic linear polyamide (PA) and nylon which has many reliable features such as chemical-resistance, elastic, insulativity etc. All these properties give the truck a better ability to reduce the impact caused by collisions and therefore help to prolong its life-cycle.

【Hobbyist Grade Brushed Motor】Equipped with a type 550 Brushed Motor which can perform high revolutions per minute. The motor generates a great horsepower for the RC Truck. This has made a huge enhancement for the acceleration and it allows the remote control truck to have a top speed of 48 Km/h which gives a greater competitiveness in drag races. However, please keep in mind that the speed differs in different terrains.

CNC Hardened steel construction, strong and durable

Etched with the INJORA logo, black finished to prevent corrosion

Easy installation, stable performance and long service life

Tunable suspension, Adjustable ride height, Adjustable wheel base, Adjustable toe angle, Tunable shocks, Selectable shock positions

Gigantic size dwarfs the average rock crawler, Realistic looking crawler tires, Detailed body w/ many scale accessories, Licensed ADDICTIVE DESERT DESIGNS accessories

Dual 42T RC550 Brushed Electric Motors, Waterproof 40A ESC, Dual waterproof high torque steering servos, 2.4GHz 3-channel radio system

BRUSHED MOTOR - The wound wire coils in the engine of this RC car act as a 2-pole electromagnet for high-powered speeds of up to 25 MPH. Powered by lithium rechargeable batteries for 40 mins of juice.

EASY MANEUVERABILITY - The easy-to-use, 2-speed remote control offers a comfortable grip and long-range handing of up to 250ft. These high-octane toys for boys and men deliver enduring, adrenalin-fueled fun.

GO OFF-ROAD - Whether you're steering on sand, concrete, or going rogue, this waterproof remote control monster truck is built to withstand rugged surfaces with expert grip, operation, and durability.

Genuine Redcat Racing Replacement part # BS213-021

Use only genuine Redcat Racing Replacement parts to achieve the best performance with your Redcat Racing vehicles.

Please consult your user's manual to ensure this is the correct part for your model.

【Compatible with】Fit for 1/10 RC Crawler Traxxas TRX6 Axial SCX10 Wraith Capra D90 TF2 Redcat GEN8

【Top Quality】Made of 304 industrial grade stainless steel, CNC machined, with excellent rust resistant and higher strength, sturdy enough

【Durable Performance】The universal joint part updated to copper, enhanced wear resistance and provide super smooth operation

AMORIL now powers the this RC buggy with a system featuring its 60A ESC (support 2/3S, we recommend the 3S lipo battery whose discharge rate is less than 25C ) and 7.4 V19000RP 550 brushed motor. 70+ km/h potential speed is achievable in optimum driving conditions on 3S LiPo. Equipped with a professional RC transmitter, new bashers will be able to set throttle limits at 30% or 70% until they are ready to use the full speed potential. Fast, rugged and factory-built, the 3S LiPo-compatible AMORIL 1:14 buggy 4X4 3S RTR comes ready out of the box to bash on any terrain.

A responsive Steering Assembly and 1.7 KG 3-wire Servo complement this RC car's ultra-reliable drive system. The main shaft and full-time 4WD transmission with large powder gear withstand huge torque, have been chosen for reliability during extreme bashing. Upgraded 7 adjustbale Metal Pull Rods and the Oil-filled shocks with coil-over design for simple maintenance, extra toughness and amazing handling improve the control performance. This combination provides incredible acceleration and speed.

New features of our AMORIL 1:14 Ready-to -Run RC truck like a stronger Alumium Alloy Chassis and a stylish, high-downforce Nylon Wing help keep all four wheels planted as you explore the upper limits of its outrageous speed range;Tough Rubber Wheels give the 1/14 scale fast remote control car effective traction for bashing on almost any terrain;Front and Rear Bumpers protect the car from crashing or heavy hit. Those were built for exciting bashing speeds and extreme,all-terrain durability.

Used with electric drill starters in kit 70111

Apply in 1:8 or 1:10 engine car ,off-road Truck ,off-road buggy,off-road car

Parts Name: Shaft rod pin end / Drill start wand

Genuine Integy Parts Ship Fast Direct From Our US Warehouse

Top-Quality Materials & Superb Craftsmanship

Preferred by Knowledgable Model Hobbists & R/C Enthusiasts

【1/18 Scale RC Rock Crawler】Fire Horse RC Car is a mini-scale crawler in 1:18 scale with injection-molded hard body. From wading hose and functioning indicators to vents on the vehicle body, the Fire Horse is based on a standard that is true to the original. The interior is also carefully reproduced on a 1:18 scale.

【Excellent Chassis Structure】The sturdy Aluminum girder gives the car more rigidity and the car chassis is stronger. A multilink geometry with panhard bar chassis design allows for maximum axle articulation, in result of a steadier drive.

【Excellent Performance】High torque transmission with 104:1 FDL. 2.4G wireless transmission system with a range up to 100 feet. The fully functional LED lighting also ensures a great look even in the dark In the RTR version, everything is ready for much more fun and enjoyable control experience.

[High-Speed: Fast Like a Beast] Get ready for an off-road adventure with the PKX rc car for adults.With a powerful 390 magnetic motor, monster truck with remote control can reach speeds of up to 19MPH and deliver 20500RPM of power, making it perfect for outdoor racing on rough terrain.The 4WD and differential design ensure stability at high speeds, so you can navigate rocky hills, gravel roads, and other challenging environments with ease. PKX fast and furious RC car provides an immersive and realistic racing experience.

[Rugged & Durable] The PKX remote control monster truck for boys 8-12 is designed for durability with aluminum ringed shocks to minimize crash damage and double-sealed ball bearings for improved performance and longevity. PKX rc rc car for adults' deep-tread tires are ideal for off-roading and provide strong traction, making Monster rc truck a formidable competitor in off-road races and perfect for Monster RC truck enthusiasts. The off road truck also features independent suspension and a PVC body that is both flexible and long-lasting, choose this remote control car for you.

[1:16 Large Simulation Scale]The 1:16 PKX off-road remote control car, a realistic replica of a real car made in a 1/16 ratio for a larger, more thrilling experience than a mini car. Perfect for hobbyists and boys for 4-12, this fast rc car for adults can ignite passion and excitement in your child's heart. Whether you're an experienced remote control car racer or a beginner, the PKX large rc car is easy to control and made with high-quality materials. Order yours now and bring your dream car to life.

Genuine Integy Parts Ship Fast Direct From Our US Warehouse

Top-Quality Materials & Superb Craftsmanship

Preferred by Knowledgable Model Hobbists & R/C Enthusiasts

Stainless steel materials construction, not easy to rust

Enhanced structure design for long-life durability

Scale Joint and spline diameter size for realistic appearance

Brushless power from the leader in aftermarket upgrades, the Sidewinder 4 builds upon Castle's most popular platform, the SIDEWINDER 1:10 SCALE SERIES.

The Sidewinder line of ESCs are our Sport-Class Surface Speed Controllers.  They're designed to withstand the most abusive environments while keeping your ride moving fast and cool.  They are sensorless and have loads of Castle Power!

CRYO-DRIVE TECHNOLOGY combines cutting-edge hardware and software advancements to significantly increase thermal performance by reducing the amount of time the ESC’s electrical components spend generating heat. Your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs.

Material: Steel .

100% Brand New

Lenght: 110MM-140MM.

Genuine Integy Parts Ship Fast Direct From Our US Warehouse

Top-Quality Materials & Superb Craftsmanship

Preferred by Knowledgable Model Hobbists & R/C Enthusiasts

Material: Steel .

100% Brand New

Lenght:122-151mm.

📌【Compatible With】: The 117-164MM Universal Drive Shaft Fits for 1/10 RC Crawler Axial SCX10 Redcat Gen7 /Pro RC4WD D90,etc.🔔Please check the manual of your specific model for compatibility before order though it is the universal drive shaft.

【High Quality Material】: The RC Upgrades Parts is CNC Machined, Advanced internal spline.

📌【Long-lasting Performance】:The long lasting and durable drive shaft provides unmatched driving versatility,it is a nice replacement accessories for the old or broken one.

Part number(s) included  2-6851X//// 2-6852X//// 2-1654////1- 1747R

Etched with the INJORA logo, looks more attractive

CNC Hardened steel construction, black finished to prevent corrosion

Easy installation, stable performance and long service life

Genuine Redcat Racing Replacement part # 04003

Use only genuine Redcat Racing Replacement parts to achieve the best performance with your Redcat Racing vehicles.

Please consult your user's manual to ensure this is the correct part for your model.

This Hard Steel Front Axle CVD Shaft is for Axial Capra Unlimited Trail Buggy

Made of high quality hard steel. Sturdy and durable, easy to install.

Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.

【Compatible with】Suit for Axial SCX24 Gladiator AXI00005 Axial upgrade parts(Don't fit for C-10, Jeep JLU,B-17 Betty, Deadbolt)

【Top Quality】Made of high-quality hardened Steel material, wear-resistant and strong, long service life

【Durable Performance】CNC machined, high precision, hardened steel construction, durable enough