Best Hifonics in 2026

Ultra-fine mosfets circuit maximizing power efficiency while improving sound quality

LED power (Green) and protect (Red) indicators

Manufactured in China

Ultra-fine mosfets circuit maximizing power efficiency while improving sound quality

LED power (Green) and protect (Red) indicators

Manufactured in China

The BXX1200.1D is a 1200 watt mono amplifier featuring Super Class D technology with an NGSD digital chip to provide you with an extremely efficient, low temperature, high amplification system that others only dream about.

The rock solid Ultra-Fi MOSFET outputs are selected for both balance and output power. This keeps power smooth even during demanding peak in the music.

The amplifiers protection condition is also shown by blue illumination for normal operation and red for a short being present and requires the attention of an installer.

3000W RMS 1 Ohm Mono Car Subwoofer Amplifier

Phase Shift: 0° - 180°

Signal to Noise - >95dB. Frequency Response - 10Hz - 250Hz. Bass Boost - 0dB - 10dB. Subsonic Filter - 15Hz - 35Hz

1,800 watts max

900 watts x 1 at 2 ohms

450 watts x 1 at 4 ohms

13.2V Max output level

Freq resp: 10hz-35khz

Input noise-reduction circuitry

15v rms max input level

12.2v max output level

frequency response: 10hz-35, 000hz

Class A/B MOSFET 4 Channel Amplifier

Peak Power: 4x300 @ 2 Ohms, 4x150 @ 4 Ohms, 2x600 Mono Bridged @ 4 Ohms

Frequency Response: 10Hz - 45KHz, Built in bass control with 0-12dB boost

Angled Terminals for Ease of Access

1,200 watts max

600 watts x 1 at 2 ohms

CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.

BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.

MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.

CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.

BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.

MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.

4000W RMS 1 Ohm Mono Car Subwoofer Amplifier

Signal to Noise > 95dB

SUBSONIC FILTER: 15Hz - 35Hz

CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio.

BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth.

MADE TO LAST - Low noise preamplifier generates maximum low voltage signal from source unit, minimizing distortion. High temperature impact resistant inputs with hex screw terminals allow secure connections and are erosion resistant.

High Quality Sound – The Neo-Mylar soft dome tweeters utilize impact resistant tweeter elements that produce incredible sound quality and increased reliability in your speaker system.

Lightweight & Durable – The Hifonics Zeus car speaker series are made with durable, lightweight material that minimizes distortions and produces musical midrange and bass tones for a high-powered music experience that fits your style.

Designed to Fit – Vehicle speakers designed to save space and fit nearly any application. Included grills provide protection against accidental damage and take up minimal room to fit the needs of your vehicle of choice.

Illuminated Hifonics Badge

SPC - Simpatico Coil Design, HSMD - Hifonics Surface Mount Design

PWM MOSFET Power Supply for Maximum Current Levels

2,200 watts max

1,100 watts x 1 at 2 ohms

550 watts x 1 at 4 ohms

2,400 watts max

1,200 watts x 1 at 2 ohms

600 watts x 1 at 4 ohms

2 Pair, RCA Nickel-Plated High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant

3.5"

2 way

125W max/25W RMS

High Quality Sound – The Neo-Mylar soft dome tweeters utilize impact resistant tweeter elements that produce incredible sound quality and increased reliability in your speaker system.

Lightweight & Durable – The Hifonics Zeus car speaker series are made with durable, lightweight material that minimizes distortions and produces musical midrange and bass tones for a high-powered music experience that fits your style.

Designed to Fit – Vehicle speakers designed to save space and fit nearly any application. Included grills provide protection against accidental damage and take up minimal room to fit the needs of your vehicle of choice.

Neo Mylar soft dome tweeter is impact resistant while providing superior sound quality and increased reliability

Moisture resistant rubber surround has high mid bass impact

Alpha cellulose poly woofer cones are lightweight for speed and extra rigid for the deepest base

1 Ohm Mono Car Subwoofer Amplifier

High Quality Sound – The Neo-Mylar soft dome tweeters utilize impact resistant tweeter elements that produce incredible sound quality and increased reliability in your speaker system.

Lightweight & Durable – The Hifonics Zeus car speaker series are made with durable, lightweight material that minimizes distortions and produces musical midrange and bass tones for a high-powered music experience that fits your style.

Designed to Fit – Vehicle speakers designed to save space and fit nearly any application. Without grills, these speakers are typically used in factory dash replacement locations where grills are not required taking up minimal space.

Eight 3 inch High Energy Specialized High Efficiency Drivers with poly composite cones and Butyl rubber surrounds that produce more volume over standard automotive and car audio speakers.

Ten speaker Bluetooth sound bar

Integrated amplifier

6" x 9"

3 way

400W max/60W RMS

Includes 12 dB in line crossover, all tweeter mounting hardware, and grills for midwoofers

Neo mylar, soft dome, impact resistant tweeter elements

Rubber, moisture resistant rubber surround with high mid bass impact

SPEAKER PAIR: Pack includes (2) Hifonics Zeus Car Audio Coaxial Speakers

WATTAGE: Maximum power: 800 watts; RMS power handling: 120 watts

DOME TWEETER: Tweeter dome is made out of soft neo mylar, making it resistant to impact; Cones are made from alpha cellulose, a lightweight material that helps create rigid deep bass sound; Tweeter size: 1 inch; Speaker impedance: 4 ohm; Frequency response: 46 Hz; Sensitivity: 88 dB; Crossover point: 1K Hz + 3K; Crossover slope: 12 dB

Pair Hifonics ZS653 6.5" 600 Watt Car Stereo Speakers. Tweeter Dome Material:Neo-Mylar Soft Dome Tweeter - Impact Resistant Tweeter Elements. Surround:Rubber - Moisture Resistant Rubber Surround with high Mid-Bass Impact. Cone:Alpha-Cellulose Cones - Light weight for speed and very rigid for deep bass. Surround / Cone Coupling:High Temperature Adhesive - Special adhesive is chosen to create a permanent bond between the cone and the surround

Tinsel Leads:Braided - Highly conductive while remain flexible during high power applications. Voice Coil:Pure Copper - Creates strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton - Lightweight and efficiently dissipates heat. Spider: Epoxy infused Natural Fiber - Natural fiber allows flexibility while the epoxy which gives strength during the manufacturing process.. Cooling System: Overcoil - Air is exchanged over the voice coil through the spider

Crossover Type: Passive Butterworth - Smooth transition of frequencies from midrange/midbass to the tweeter element. Frame Type: Anti-Resonant Stamped Steel Basket - Very strong with minimal harmonics or distortions from flex or ringing. Motor: Ferrite Magnet - Creates a strong magnetic field while remaining small enough to fit nearly every application. Connectors: Spade - Use spade connectors or solder direct for the best connection

Full Range Class D Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.

New Pair of *Hifonics HFX12D4* 12" 1600 Watt Car Subwoofers

800 Watt Max (1600 Watt Pair)

400 Watt RMS (800 Watt Pair)