Best High Lifter in 2026

Package Dimensions: 13.208 cms (L) x 26.416 cms (W) x 13.208 cms (H)

Product Type: Vehicle Brake Pad

Package Quantity: 1

PRODUCTS BUILT TO LAST: From the design, materials and craftsmanship, our engingeers use their expertise to build kits to last the lifetime of your machine

TACKLE THE TERRAIN: This trail friendly lift system is built to help you hit the gnarly holes you’ve dreamed of and get you in and OUT of deep mud

LONG TERM LIFE: Zinc plated for a long life in rugged conditions

THE OUTLAW DESIGN: The 6-ply rates Outlaw was deisgned to be durable and puncture resistant but 3-4 lbs lighter than most mud tires to maximize horsepower

TREAD BAR DESIGN: The tread design features a rouned tip, paddle-like, cupped lug and is a full 1 1/2 inches deep for impeccable traction

BENEFITS OF CUPPED LUGS: Cupped Lugs help propel your machine forward as opposed to cutting and digging through holes

STRENGTH & DURABILITY: The steel base is strong and durable to help prevent leaks and warping

RUN MORE EFFICIENTLY: This automotive grade filter will help your ATV or UTV run smoother by keeping out debris

INCREDIBLE FILTRATION: Filters out particulates as small as 10 microns

THE OUTLAW DESIGN: The 6-ply rates Outlaw was deisgned to be durable and puncture resistant but 3-4 lbs lighter than most mud tires to maximize horsepower

TREAD BAR DESIGN: The tread design features a rouned tip, paddle-like, cupped lug and is a full 1 1/2 inches deep for impeccable traction

BENEFITS OF CUPPED LUGS: Cupped Lugs help propel your machine forward as opposed to cutting and digging through holes

ADDED PROTECTION: This snorkel kit is intended to provide clean, dry air to the engine and other parts needing venting on ATVs such as clutches, differentials, transmission, carburetors and fuel tanks. This doesn’t necessarily mean the ATV should exceed the OE manufacturer’s stated maximum rated water line depth. The snorkel kit is intended as additional margin of protection in the event that the ATV is inadvertently driven into water deeper than the OE manufacturer’s air intakes will tolerate.

EVERYTHING YOU NEED: This kit includes Custom Powder Coated Riser Bracket to keep risers straight, evenly spaced and looking good, Rubber Grommets to hold riser tubes in place, 1 ½”, 2” or 3” Risers - based on specific model, Pre-bent High Heat Silicone Tubing for easier install and durability, Bellows to keep water out of differentials and transmission, All mounting hardware for complete installation, Step-by-step instructions complete with detailed photos

CRAFTED TO FIT: Compatible with Can Am Outlander 2015-2018 ATV Models

OUTLAW 3 ENHACEMENTS: The Outlaw 3 is designed to get through the toughest mud holes imaginable

UNRIVALED DESIGN: The side wall wrap is engineered to clean out as you ride and the steep eading edge helps dig more aggressively than the standard tractor style lug

TRUE HEIGHT: The Outlaw 3 will give you a true height measurement

DISC AND DRUM BRAKES - Useable with both disc and drum style brake pads on any type of vehicle from passenger cars and trucks to heavy duty transportation

COLOR CODED - Color powder-coated blades help to quickly determine the brake pad status when examining brake lining

DURABLE STEEL - The durable 20-gauge steel blades won't easily bend or break like plastic

Compresses Dual Brake Pistons Simultaneously.

Squeeze the tool handle until the plunger contacts the inboard brake pad.

Continue squeezing to compress both pistons.

Ceramic, Semi-Metallic, and Organic formulas provide safety and reliability for a range of vehicle applications.Material:Ceramic

Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness

No curing or machining required, ready to be installed right out of the box. Attachment Method: Bonded

Pair of genuine Shimano replacement pads

Alloy and Steel back plate using Ice-Technologies heat radiation cooling fins with metal sintered braking compound

J04C metal pad and spring, with cooling fin

The Carbon-fiber ceramic brake pad not only features thermal scorched pad surface for a fast break-in but chamfered slots for noise-free braking. Not for track use

The Carbon-fiber ceramic brake pads are chamfered and slotted and have premium stainless steel shims to ensure noise-free braking, just like the stock brake pads

An upgraded with powder coated backing plate perfect for muscle cars, significantly enhances braking performance and extends life by resisting rust and corrosion

Proprietary Carbon-Fiber Ceramic Materials Enhance The Strength Of A Typical Ceramic Brake Pad Compound To Handle Heavier Loads

Low Dust Braking Validated Through On-Vehicle 3Rd Party Tests In Los Angeles, Showing On Average 30% Less Dust Versus Oe

Drilled and Slotted Performance Rotors For Maximum Cooling. Rotor Material: Iron

Shimano brake pads for aluminum rims. Model R55C4 (New version of R55C3)

Includes: 2 pair Shimano Brake Pads R55C4 and Bolts

Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015

Complete Double-H Sintered Brake Pad Change Kit includes 2 EBC FA409HH Front Brake Pads and 1 EBC FA409HH Rear Brake Pad

Double-H Sintered Brake Pads deliver high performance and are well known as the EBC flagship sintered high-performance brake pad

Material: organic, metallic, steel back plate

Compatibility: Code RSC, Code R, Guide RE

Recommended Use: downhill, enduro

Colour: black

Department: unisex

Material: aluminium

Proprietary Carbon-Fiber Ceramic Materials Enhance The Strength Of A Typical Ceramic Brake Pad Compound To Handle Heavier Loads

Low Dust Braking Validated Through On-Vehicle 3Rd Party Tests In Los Angeles, Showing On Average 30% Less Dust Versus Oe

Drilled & Slotted Performance Rotors For Maximum Cooling. Stud Size- Front- 0.63 Inch

All shoes are radius ground and edge trimmed

Package Dimensions: 15.748 H x 1.016 L x 12.192 W (centimetres)

Package Weight: 0.227 kilograms

The Carbon-fiber ceramic brake pad not only features thermal scorched pad surface for a fast break-in but chamfered slots for noise-free braking

The Carbon-fiber ceramic brake pads are chamfered and slotted and have premium stainless steel shims to ensure noise-free braking, just like the stock brake pads. Without Wear Sensor

An upgraded with powder coated backing plate perfect for muscle cars, significantly enhances braking performance and extends life by resisting rust and corrosion

Z36 Truck & Tow Carbon-Fiber Ceramic brake pads offer extreme braking performance that is designed for trucks or 4x4s without sacrificing everyday drivability

Low dust brake pads designed to maximize stopping power and keep those wheels clean

The brake pads feature premium stainless steel shims provide better heat dissipation & virtually noise-free braking

Country Of Origin : United States

The Package Height Of The Product Is 8.79 Centimeters

The Package Length Of The Product Is 1.6 Centimeters

Rim: Aluminium

Attachment Type: bolt-on

More linear braking performance - lever force vs. braking force

The Package Length of the Product is 8.25 inches

The Package Width of the Product is 15.25 inches

The Package Height of the Product is 13.25 inches

Pair of genuine Shimano replacement pads

Steel back plate with resin braking compound

Will fit; BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M445, BR-M416-A, BR-M416, BR-M415, BR-M375, BR-T615

Country Of Origin : United States

The Package Height Of The Product Is 1 Inches

The Package Length Of The Product Is 1 Inches

RESTORES LIKE-NEW BRAKING PERFORMANCE -- OE fit and form design delivers consistent, even braking throughout the life of the brake pad

REDUCED VIBRATION -- Application-specific design reduces noise-causing vibration

EVEN PERFORMANCE -- Engineered for consistent braking throughout the life of the pad

For HD-M285 / HD-M275 / HD-E350 / HD-R290/ Gemini Series / Auriga Series (not Sub) / Draco Series / Aquila / HDC 300 & 330 / Aries / Mira / MD-C310 / MD-C510 / MD-C550 / MD-M280

Sold Per Wheel, 2 Pads

For use on front or rear brake

2 Pairs Shimano Disc Brake Pads and Spring B01S (Resin) - Resin brake pad without radiator fin for Shimano disc brake.

Compatible with: BR-C501, BR-M575, BR-M525, BR-M495, BR-M486, BR-M485, BR-M475, BR-M465, BR-M447, BR-M446, BR-M445, BR-M416, BR-M416A, BR-M415, BR-M4050, BR-M3050, BR-M395, BR-M375, BR-M355, BR-T675, BR-T615, BR-TX805

Resin pads: Make less noise than sintered metal pads and offer better modulation

RESTORES LIKE-NEW BRAKING PERFORMANCE -- OE fit and form design delivers consistent, even braking throughout the life of the brake pad

REDUCED VIBRATION -- Application-specific design reduces noise-causing vibration

EVEN PERFORMANCE -- Engineered for consistent braking throughout the life of the pad