Best Hihitomorrow in 2026

High strength steel construction, studry and durable, difficult to damage.

Valve Stem Seal Pliers Replace for Betooll Seal Removal Tool.

Pliers nose has serrations in the tip for improved grasp on seals.The long neck design can reach into confined area of the seal to grip it for removal.

APPLICATION: Fit for DC97-17040B DC97-19636A DC97-17004A, DC97-17004B, DC97-17004E WF393BTPARA, WF393BTPAWR, WF395BTPARA, WF395BTPASU, WF395BTPAWR, WF24H5400AW, WF405ATPASU, WF405ATPAWR, WF42H5000AW, WF42H5200AF, WF42H5200AP, WF42H5200AW, WF42H5400AF, WF42H5400AW, WF42H5600AP, WF42H5600AW washer tub.

FUNCTION: If the washer is noisy during the spin cycle or is leaking from the bottom of the tub this kit may be needed. Repair noisy, leaking, shakes and moves, make rotate quite high-speed ，reduce maintenance costs and replace frequency.

PACKAGE: This kit includes two bearings and one seal. Replace for Samsung OEM# DC62-00156A 6601-002637 6601-000148.

APPLICATION: This lock nut 2 1/4" socket tool fits for 2007-2017 Harley Davidson Twin Cam models, 2006-2017 Harley Davidson Dyna models, 2007-2019 Harley Davidson Electra Glide models, 2015-2017 Harley Davidson Heritage Softail.

FEATURES: This tool is a main shaft sprocket wrench tool for the 2 1/4" nut that comes with a threaded bushing.

PACKAGE INCLUDE: One 2 1/4" Socket Tool and one threaded bushing.

APPLICATION: The front axle seal kit is compatible with 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 Ford Super Duty F250 F350 F450 F550 dual or single rear wheel 4X4 trucks with front dana 60 axles.

FUNCTION: The tube seal kit is used for the outer axle shaft seal to prevent dirt from entering and replace the old and worn seals. Rebuild the front axle for Ford Super Duty F250 F350 F450 F550.

PACKAGE INCLUDE: 2 inner knuckle oil seals that fit on the outer axle shaft, 2 outer tube dust seals that fit on axle housing tube end, 2 vacuum seal O-rings that are for the wheel hub bearing assy.(total 6 pieces). Replace for part # 2017426, 2014835, 54983.

Function: This Cast Ingot Mold holds up to 100 troy ounces of gold, and great for making Gold, Silver, Copper & Aluminum Bars and the other metal bars.

Nice Features: Designed with a slight taper for easy ingot removal. Durable handle, more direct and easy to use.

Size: Overall dimensions 10.04" Long x 3.20" Wide x 1.94" Deep. And the handle is 3.47'' long.

🔨Blacksmiths is to drill a series of small holes to handle hand-made hammers, ax, or tomahawks, etc. Once the holes are drilled heat, the item and use a cold chisel or similar tool to split the piece. Once split, heat the piece again and drive the drift through the hole. Tap the sides of the workpiece while continuing to drive the drift into the workpiece until the drift hole gets to the desired measurement. The process of heating may be needed several times to get the desired shape.

🔨These are 3pc Drift Sets. The size of the drift refers to picture 3.

🔨The drifts are lightly sanded with 60-grit to provide a smooth drifting operation and feature a reverse taper on the struck end so they fall through the stock when you drive the drift.

APPLICATION: Compatible with most air spring applications, including Load Lifter 5000 series, Load Lifter 5000 Ultimate, Load Lifter 5000 Ultimate Plus, and Load Lifter 7500 XL, replace for Air Lift 52140 52440.

TYPES: Available in 4" straight, 6" straight, 4" angled, and 6" angled varieties, the Universal Air Spring Spacers are designed to accommodate most lift kits, up to six inches(this one is 4” angled).

FUNCTION: This air spring spacers withstand a force of 10 tons and make it strong enough to withstand the heaviest load. Take your existing air suspension solution to the next level of safety and comfort with our Universal Air Spring Spacers.

APPLICATION: The cartridge puller fits for Moen single handle cartridges 1200,1222 & 1225 series, repairs for a cartridge-style shower, bathtub, or sink faucet.

APPLICATION: The cartridge puller fits for Moen single handle cartridges 1200,1222 & 1225 series, repairs for a cartridge-style shower, bathtub, or sink faucet.

PROFESSIONAL TOOL: A cartridge puller is a simple plumbing accessory that has one purpose only: to extract shower or sink faucet valve cartridges that are stuck in place. Design to fit and remove both brass and plastic cartridges.

(Fit type): Fit for 2007-2018 Jeep Wrangler JK, 2007-2018 Jeep Wrangler Unlimited JK.

(Function): This front track bar brace is designed to distribute the increased load the track bar bracket encounters on a lifted Jeep or a Jeep with larger size tires. The added track bar bracket thickness prevents the track bar bolt from ovalizing out the stock mount holes, which can lead to vibrations and eventually cause the dreaded death wobble. This brace adds strength to the mount and eliminates weak links in the system.

(Material): Made of high-quality steel, laser-cut and CNC bent, surface black powder oxidation treatment, corrosion resistance, wear resistance, strong and durable.

FUNCTION: These line connector kits are used to repair only the damaged section, not the whole A/C line assembly, making leaks a distant memory, thereby saving your time and money.

INSTALLATION: Easy to install, no special tools are needed. Note that this splicer is for the aluminum/hard line and not the rubber hose line.

FEATURES: These 800-640, 800-641, 800-642 line splicers respectively for 5/8'', 3/8'', 1/2'' aluminum lines. This connector /coupler cuts out the "leak" portion of the line by touching the leak point.

APPLICATION: This hydraulic pressure gauge is compatible with most excavators. The hydraulic pressure gauge fits for pneumatic equipment, pumps, compressors, hydraulic presses, and motors of various excavators. And widely used in construction, ships, and other fields.

Accurate Digital Pressure Gauge: This gauge is a high-precision and intelligent digital pressure gauge. It has a high-precision sensor and displays the pressure accurately in real-time, equipped with a large-size LCD. The pressure gauge has various features, such as zero clearing, a backlight, an on/off button, units, and a low voltage alarm. And it is convenient to install and easy to operate. Its max work pressure:10000PSI/700BAR/70MPa.

SCREEN DISPLAY: 4-digit LCD screen, the hydraulic pressure gauge with clear LCD display design, clear number markings for convenient and easy readings. (display Unit: Bar, PSI ,MPa, Kgf/cm2)

APPLICATION: The interior door handles cover trim accessories compatible with 2003, 2004, 2005, 2006, 2007 Hummer H2 Adventure Crew Cab Pickup, Base Crew Cab Pickup, Base Sport Utility, Luxury Sport Utility, Adventure Sport Utility, Special Edition Sport Utility 4-Door.

FUNCTION: The chrome billet interior door handle plate accessories can cover existing scratches and prevents future scratches, providing a beautiful and clean appearance, making your H2 unmatched.

MATERIAL: The H2 interior door handle cover trim accessories are made of automotive-grade chrome billet, chrome door handle covers are laser-cut and molded specifically to fit your vehicle.

APPLICATION: The 1420 head repair kit is compatible with Honda B16 engines, 1986-1995 Legend, 1986-2001 Integra, 1991-2005 NSX, 1996-2004 RL, 1997-2001 CR-V, 1999-2005 Civic SI, 2002-2006 RSX, 2002-2006 CR-V, 2003-2007 Accord L4, 2003-2007 Element. And fit for Honda, Toyota and other imports.--M11.5mm x 1.5

FUNCTION: This cylinder head bolt repair kit is specia designed for Honda, some Toyota's, etc. (Modifications may be required for applications other than Honda). The kit offers longer threaded inserts for maximum thread engagement, and ideal for repairing stripped or damaged internal threads as well as performing maintenance work to protect any threads from galling.

PACKAGE INCLUDE: The head repair kit includes 1 x spiral drill, 1 x screw tap, 1 x hex key, 1x installation tool, 10 x thread repair insert. All parts are placed in a case, which is convenient for transportation during maintenance and storage after maintenance.

APPLICATION 1: These are universal bump stops, for many ars, trucks and SUVs. The bump stop set is fit for 1976-1983 Jeep CJ5 Base, 1976-1983 Jeep CJ5 Renegade, 1977-1980 Jeep CJ5 Golden Eagle, 1980-1983 Jeep CJ5 Laredo, 1982-1983 Jeep CJ5 Limited.

APPLICATION 2: The leaf spring bumper 9.9137G set fit for 1976-1986 Jeep CJ7 Base, 1976-1986 Jeep CJ7 Renegade, 1977-1979 Jeep CJ7 Golden Eagle, 1980 Jeep CJ7 Golden Hawk, 1980-1986 Jeep CJ7 Laredo, 1982-1983 Jeep CJ7 Limited.

FUNCTION: The bump stop set can prevent the shocks and struts from damage, helping cushion collapsed suspension and preventing bottoming out and expensive vehicle damage.

Bearing Carrier Retainer Wrench Tool Replaces #91-61069, 91-61069T, 18-9858.

Removes and installs bearing carrier retainer nuts on Bravo One and Two, MC-I, R-MR, Alpha One, Alpha One/Gen II, TRS drive units and outboards. Please check your part numbers to confirm fitment.

Durable steel construction--Black Oxide finish with anti-rust and anti-corrosion.

APPLICATION: Universal valve spring remove tool fits for all 3/8'' and 7/16'' rocker studs, specially designed for compressing valve springs with the cylinder head-on.

FUNCTION: Simplifies between-rounds valve spring changing. Easily and quickly replace valve springs, remove valve spring from an assembled engine for checking or replacing, quickly and easily press down to compress coil spring then remove valve keepers.

Easy to use: The tool disassembles easily. Use the principle of leverage, press down to compress coil spring, then remove valve keepers, and release slowly, then remove the valve spring. The handle gives all the leverage needed to compress the strongest springs.

🔨NICE DESIGN: The blacksmith anvil hardy tool fits in a 1'' hardy hole in an anvil or can be used in a vise. The blacksmith hardy hole tools have a 1-3/4" cutting edge and the shank is slightly tapered. the shaft can be ground down to fit smaller holes.

🔨PROFESSIONAL ANVIL HARDY TOOL: Traditional hardy cutting tool for all your cutting needs. Shank is slightly tapered and undersized, as most traditional hardy were. It cuts faster and easier than a saw and is less expensive, as there are no blades to wear out or break.

🔨EASY TO WORK: To use a hardy, place it in the hardy hole (the square hole) in the anvil, lay the bar or rod on it at the point to be cut, and hammer it down against the sharp edge. The hardy, like other cutting tools, works better if kept sharp. It may be ground like a cold chisel.

APPLICATION: The hpop test gauge tool is compatible with 1994-2007 Ford Powerstroke 6.0L & 7.3L Diesel engines, 1994-2007 International VT365 & T444E Diesel engines, 1997-2006 CAT 3126B, 3126E, and C7 Diesel engines.

FUNCTION: Dual purpose test tool, monitoring system performance with the analog gauge or testing air leak. Check the leak in the engine's high-pressure oil system that runs fuel injectors, and find the precise source of leakage. Save your time and your money.

EASY TO USE: For air leak testing, simply supply shop air pressure through the ICP sensor port or available plugged oil rail port, and connect 12V to the IPR. No need to remove the IPR valve, and no adapter needed to screw in place of the IPR. No fancy diagnostic scan tools needed.

APPLICATION: This VCM harness kit is compatible with Honda Acura after 2013, for Honda Pilot after 2009, for Honda Accord after 2008, for Honda Ridgeline after 2007, for Honda Odyssey after 2007. Compatible with Honda 3.5L V6 Engine with VCM.

This VCM disable kit helps prevent driveline vibration due to unbalanced engine operation.

Helps to reduce excessive oil consumption, prevent plug scaling, engine misfire damage, engine bracket wear and so on.

Applications: Remove valve spring quickly without removing the cylinder head. Valve Keeper Remover And Installer Kit For use on all motors with overhead valves, cars, motorcycles, marine, and aircraft engines.

Function: Quickly removes and installs valve keepers on most overhead valve engines with valve stems from 5/16" to 3/8". The new smaller size fits for new Chrysler New World Engine and for some Toyota four cylinders.

Easy to use: Push or tap tool with a hammer to remove valve keepers. Magnet in tool body captures keepers for quick removal and valve disassembly. To install keepers, load in retainer on the valve stem, then push or tap handle to install. Can be used on the car or bench.

66784 Stud Mount Valve Spring Compressor: Universal valve spring remove tool fits for all 3/8'' and 7/16'' rocker studs, specially designed for compressing valve springs with the cylinder head-on. Easily and quickly replace valve springs, remove valve spring from an assembled engine for checking or replacing, quickly and easily press down to compress coil spring then remove valve keepers.

19700 Valve Holder Hose: Equipped with two-step fitting for both 14 mm and 18 mm threads, heavy-duty 12" flexible hose allows easy access to spark plug hole and air supply. Usually used when the valve springs or valve stem seals are replaced, thread fitting to spark plug hole and another end to air supply. Air pressure helps prevent the valve from falling into the combustion chamber.

HW0107 Valve Stem Seal Pliers: Pliers nose has serrations in the tip for an improved grasp on seals.The long neck design can reach into the confined area of the seal to grip it for removal. The tool doesn't damage stem seals when fitting to a cylinder head but you run the risk of distorting the seal if you just use a pair of normal pliers.

APPLICATION: The universal network terminator is for NMEA 2000 Networks, for Simrad Networks, for B&G Networks, for Navico Networks, and for Networks.

FUNCTION: Use these resistor terminators to properly connect NMEA 2000 networks. And one male and one female terminator is required for each NMEA 2000 network.

MATERIAL: The NMEA network terminators are made of quality material, 5-pin micro terminators have precise threads for easy operation, plug and play, fast and convenient.

APPLICATION: This general purpose adapter kit is compatible with most vehicles, such as Jeep Wrangler TJ YJ XJ JK JL, Volvo, Toyota, Honda, and so on. Rated 5000 LB.

FUNCTION: This universal tow bar adapter bracket adapts any base plate to the Blue Ox tow bars with cross angle. It can be used to build the own base plate to fit Blue Ox tow bars. This kit allows some vehicles to build own base plate without modification. Replace for Blue Ox BX88230.

FEATURES: Universal fit bolt on tow bar attachment, 5000 lbs gross trailer weight rating, perfect fits the brackets on the tow bar. Package includes brackets, hardwares and insruction.

APPLICATION 1: The T-0220-39 bushing driver set is fit for most of these automatic transmissions. Compatible with GM: 125,125C, 180, 180C, 200, 200-4R, 200C, 250, 250C, 325, 325-4L, 350, 350C, 400, 440-T4, 4T60E, 4T65E, 700-R4, 4L60, 4L60E, 4L65E, Powerglide, Super Turbine 300.

APPLICATION 2: Fit for Ford A4LD, AOD, AODE, 4R70W, ATX, C3, C4, C5, C6, CAST IRON FORD (SC, MC, M8, M12, FMX), JATCO 3N7, 4N7. Fit for Chrysler 404, 413, 470, 500(does not work on overdrive section), 518(does not work on overdrive section), 670, 727, 904, 999(will work on the transmission only not on overdrive section).

MEET YOUR SATISFACTION: Most complete kit in the industry. Drives over 200 different bushing – foreign & domestic. The bushing driver kit provides the easy removal and installation of bushings on all the the above automatic transmissions, save your time and your money.

APPLICATION: The Taillight Cover Trim is compatible with 2014 2015 2016 2017 2018 2019 2020 2021 2022 Jeep Grand Cherokee. Make your Grand Cherokee out of ordinary!

DESIGN: Specially designed for Jeep Grand Cherokee, the whole set include 4 pieces, specially designed for the decoration of the car tail light.

MATERIAL: Made of premium ABS plastic material, treated with the polish process for deformation and color protection, anti-oxidation, and anti-corrosion. Not easy to fade or peel. Durable and reliable.

APPLICATION: The 45DCT Receiver Logic Control Board is compatible with Liftmaster, Chamberlain, and Sears Craftsman DC chain drive and belt drive garage door openers manufactured after 2011. The 45DCT receiver logic board replace the OEM part number 45DCT, 045DCT.

COMPATIBLE WITH MORE MODELS: The 45DCT garage door opener logic board is compatible with LiftMaster 8630, 8550 garage door operators. And it fits for Chamberlain models 349544, 349544EV, HD920EV, HD930EV, LW500EV, WD962KEV, WD962KPEV, WD962MLEV. This circuit board works with Sears Craftsman models 139.3043, 139.30430, and 139.30437.

REPLACEMENT OEM PART: The sticker on your board may say one of these numbers, 45DCT, 45DCBR1A, 041D7356, 1D7356, 41DCBC1A, 41DCBC3A, 41DCCC2A, 41DCBC5A, 45DCCL5A, 45DCCL3A, 45DCCL1A, 45DCCR5A, 41D7356, 45DCCR3A, 45DCCR1A, 001D7356, 41DCCC1A, 41DCCC3A, 45DCJL5A, 45DCRL1A, 41DCCC5A, 45DCRL3A, 45DCJL1A, 45DCJL3A, 45DCBL5A, 45DCBL3A, 45DCBL1A, 45DCBR5A, 45DCRL, 45DCBR3A. The correct board on your unit make sure that between the connection pins there's an etching that says "014D1174" or "014D1275" (it will have a letter at the end, most commonly "I" or "A", but not always, the letter doesn't matter).

APPLICATION: The r0366800 power control board is compatible with Zodiac Jandy Lite2 LJ pool and spa heater models 125, 175, 250, 325, and 400. Fit for Jandy Lite2 LJ125, LJ125N, LJ125P, LJ175, LJ175N, LJ175P, LJ250, LJ250N, LJ250P, LJ325, LJ325N, LJ325P, LJ400, LJ400N, LJ400P.

FEATURES: The R0366800 power control board replacement can accommodate 115V supply to the heater and the other side of the plug accommodates 230V supply to the heater. Replace the old and damaged power control board, and make your spa run well again.

REPLACEMENT: The control board contains a R0366800 control board, a replacement for OEM part # R0366800. Fit for Zodiac Jandy Lite2LJ Pool and Spa Heater Electrical System. It is recommended also to replace the conversion plug when replacing this power control board.

APPLICATION: The J-35791 cylinder liner puller remover tool is compatible with the Non-EGR Detroit Diesel 50 & 60 Series engines and Volvo D12 D13 D16 engines.

FUNCTION: The cylinder liner puller removal tool used to safely and quickly remove the cylinder liner and reduce the damage to the cylinder in the disassembly process. Save your time and your money.

REPLACE FOR : This tool replace for cylinder liner puller remover tool part # J-35791 M30143.

APPLICATION: This lower retainer nut wrench set is compatible with Yamaha, Honda, Suzuki, Mercury, and MerCruiser lower carrier nuts.

FUNCTION: The lower carrier retainer nut wrench tools kit used to remove and install retaining ring nut on Yamaha, Honda,Suzuki, Mercury, and MerCruiser drive units and outboards. It is a DIY tool used in removing retaining rings so bearing carriers can be removed fast and easy.

REPLACEMENT: This lower retaining ring wrench tool set replace for Mercury OEM part # 91-61069T, replace for Yamaha OEM part # YB-34447, YB-06823, YB-06075, YB-0647, YB-06677, YB-06578.

APPLICATION: The 15030 pin and bushing adapter tool kit is compatible with Automann MR656UB, MR656, MR782, MR714E, and MR714. For use with Flagg RB268, RB205UB, RB235, RB268, RB205, RB234, RB260, and Freightliner 1613962000, 1616412000, 1618035000, 6813250150, 6813250250.

For use with Dayton RB-268, RB-205U, RB-268, RB-205, RB-234 and Dyco D046, D46, DT1155. Fit for Euclid E-8804, Gaff 11083, Hendrickson 51209 & 52296, International 3538115C1, Meritor MR782, Peterbilt 52296, World America WA12-5136.

FUNCTION: The pin and bushing service kit will easily allow you to remove and install rubber-isolated pins and bushings for trucks and equipment while the suspension remains on the vehicle. The adapter has 20 tons pulling capacity to reduce the risk of damage to nearby components. Designed for use with the 15000 pins and bushing Starter kit.