Best Hitlights in 2026

SIMPLE AND EASY TO USE: Low voltage bright LED light strips for commercial and residential use-in living rooms shelving lighted cabinets toe-kicks and more. The reel is 16.4 foot/ 5 meters in length

CUSTOMIZE TO ANY LENGTH AND APPLICATION: Compatible with our High Density HitLights 8mm connector extensions and cable accessories. Simple connect -cut with a pair of scissors every inch

SET THE MOOD AND BRIGHTNESS LEVEL TO ANY SPACE: These LED strips are great for a variety of indoor /interior uses including undercabinet lighting in kitchens ambient accent lighting in bedrooms lighting toe-kicks in bathrooms or adding a backlighting source to display decorations or book shelves

IP67 WATERPROOF: This outdoor light strip with an IP67 water-resistant rating, can be installed outdoors and withstand rain and snowfall, ideal for use on balcony, roof, backyard, garden, patio, porch, or else

WARM UP YOUR SPACE MOOD: Our tape lights have a high display index of 90+ (maximum 100), meaning it will output brighter, more natural colors, and minimal damage to one's eyesight, perfect for jazzing up your outdoor space

SAY GOODBYE TO COMPLICATED INSTALLATIONS: Our kits install quickly and easily right out of the box no soldering electrical experience or tools required - and they last for years with minimal power requirements

EZDim Product - First LED Driver + In-Wall Dimmer Switch in one unit, Simplifies LED installation by eliminating compatibility issues between driver and dimmer; Fits in a standard recessed electrical box

100% - 1% SMOOTHING DIMMING - Output voltage is adjustable via sliding lever, main suapply output voltages remain within the regulation limit of +/- 3%; Short circuit, thermal runway, and over voltage protection

Power failure memory - If power is interrupted, EZDim will return to setting prior to interruption; No derating required when ganging units

SIMPLE AND EASY TO USE: Low voltage bright LED light strips for commercial and residential use-in living rooms shelving lighted cabinets toe-kicks and more

CUSTOMIZE TO ANY LENGTH AND APPLICATION: Compatible with our High Density HitLights 8mm connector extensions and cable accessories. Simple connect -cut with a pair of scissors every inch

SET THE MOOD AND BRIGHTNESS LEVEL TO ANY SPACE: These LED strips are great for a variety of indoor /interior uses including undercabinet lighting in kitchens ambient accent lighting in bedrooms lighting toe-kicks in bathrooms or adding a backlighting source to display decorations or book shelves

PREMIUM HIGH DENSITY LED STRIP: Made of double sized PCB board (2835 chips), making strips more durable and reliable for long-term use. With a lifespan of over 60,000 hours. These discreet strips feature closely packed LEDs for smooth, even light without any spots

CUSTOMIZE TO ANY LENGTH AND APPLICATION: They are cuttable and connectable, just use scissors to cut along the cut lines, and compatible with our HitLights 10mm connector accessories

DIMMABLE AND FLEXIBLE: Our warm white LED tape lights can be dimmable with a compatible dimmer. They are perfect for various indoor/interior uses, such as under cabinet lighting in kitchens, ambient accent lighting in bedrooms, toe-kicks lighting in hallways, or adding a backlight source for screens, decorations, bookshelves

EZDim Product - First LED Driver + In-Wall Dimmer Switch in one unit, Simplifies LED installation by eliminating compatibility issues between driver and dimmer; Fits in a standard recessed electrical box

100% - 1% SMOOTHING DIMMING - Output voltage is adjustable via sliding lever, main suapply output voltages remain within the regulation limit of +/- 3%. Short circuit, thermal runway, and over voltage protection

Power failure memory - If power is interrupted, EZDim will return to setting prior to interruption; No derating required when ganging units

WHAT YOU'LL NEED: You will need a 12 volts Power Supply to light up your lights, or choose a dimmable driver and wire lead connector for customizing your personalized lighting projects. (They are sold separately)

CUSTOMIZE TO ANY LENGTH AND APPLICATION: They are cuttable and connectable, just use scissors to cut along the cut lines, and compatible with our HitLights 8mm connector accessories

CREATE A RELAXING AMBIANCE FOR ANY SPACE: These LED tape lights are perfect for a variety of indoor/interior uses including under cabinet lighting in kitchens, ambient accent lighting in bedrooms, toe-kicks lighting in hallways, or adding a backlight source for screens, decorations, bookshelves

EZDim Product - First LED Driver + In-Wall Dimmer Switch in one unit, Simplifies LED installation by eliminating compatibility issues between driver and dimmer; Fits in a standard recessed electrical box

100% - 1% SMOOTHING DIMMING - Output voltage is adjustable via sliding lever, main suapply output voltages remain within the regulation limit of +/- 3%; Short circuit, thermal runway, and over voltage protection

Power failure memory - If power is interrupted, EZDim will return to setting prior to interruption; No derating required when ganging units

12 VOLTS DC OUTPUT SUITABLE FOR LED STRIP LIGHTS and other low voltage devices such as security cameras audio and video gear and more. Ideal for LED installations in living rooms shelving lighted cabinets toe-kicks and more

PLUGS DIRECTLY INTO YOUR WALL OUTLET no hardwiring no soldering no electrician or electrical experience required. Includes output cable with a standard 5.5 x 2.1mm DC jack positive tip for connecting to your strip controller or dimmer

USE ANYWHERE - Great for a variety of indoor / interior uses including undercabinet lighting in kitchens ambient accent lighting in bedrooms lighting toekicks in bathrooms or adding backlighting to displays decorations or book shelves

RELIABLE AND EASY TO USE cable jumper connection for bending your strips around a corner extending them across a gap or connecting them to a power supply or dimmer. 100% solder free!

SOLDERLESS CONNECTION can be used by anyone. No tools, soldering, or electrical experience required. Connects directly to any 2pin 8 mm pcb board. Compatible with both 12v and 24v strips.

CONNECTS EASILY to a cut section of LED light strip. Simply open the clasp, make sure the strip aligns correctly with the connector, and slide it underneath the contact prongs.

🎁 All In One Kit: HitLights 3 Pre-cut strip lights including a 21 key RF remote, 12V DC power supply, Total 36Inch (12Inch *3) 5050 LED Strip lights, three plug and play extension wires (12 inch), Six adhesive backed wire clips to keep things neat.It can fully meet your various needs for DIY.

🎄 High Quality RGB Strip: PCB board with double layer copper and 36 super bright 5050 leds. The lighting color is pure, more stable and brighter. The best choice for TV backlight, PC gaming light, behind wall decor light, showcase display light, under cabinet light, shelf light, Collection cabinet, fish tank background light, etc.

🎁 360°RF Controller: The remote comes with 12 colors and 19 modes switch, adjustable brightness and speed. Easily control your LED strip lights within 49-66ft without failure due to obstructions.

🎁 All In One Kit - HitLights 4 Pre-Cut Short RGB LED Strip Lights, come with 48Inch LED lights (12Inch *4) ,RF remote, 12V power supply and all accessories you need. Easy to install and best choice for TV LED backlight, PC gaming light, behind wall decor light, showcase display light, under cabinet light, shelf light, Tik Tok lights, etc.

✨ High Quality RGB LED Strip Lights - Double layer copper on PCB board and ultra bright 5050 LED Strip with 48 LEDs. More efficient, brighter, longer lasting. Pre-cut design for Easy DIY and perfect customization.

🎁 360°RF Remote - 12 colors and 19 modes, brightness and speed adjustment with simply a fingertag on the remote. Easily control your LED strip lights within 49-66ft without failing even with obstacle blocking.

All In One Kit: EVERYTHING YOU NEED including a 21 key RF remote, 12V DC power supply, 4Pre-cut Total 48Inch 5050 LED Strip lights, three plug and play extension wires (12 inch), eight adhesive backed wire clips to keep things neat.

RGB LED Strip Kit: Super bright 5050 LED Strips, Pure color(Red blue green yellow blue purple white), better visual enjoyment when have installed LED Accent Kit.

Upgraded Blue 3M LED Tape: In order to solve the customer's troubles of the light strip adhesive, we have used upgraded 3M Blue Adhesive and adhesive backed wire clips for solve this problem. No need to worry about the falling off of the adhesive.

12 VOLTS DC OUTPUT SUITABLE FOR LED STRIP LIGHTS and other low voltage devices, such as security cameras, audio and video gear, and more. Ideal for LED installations in living rooms, shelving, lighted cabinets, toe-kicks, and more

PLUGS DIRECTLY INTO YOUR WALL OUTLET, no hardwiring, no soldering, no electrician or electrical experience required. Includes output cable with a standard 5.5 x 2.1mm DC jack (positive tip) for connecting to your strip, controller, or dimmer.

USE ANYWHERE - Great for a variety of indoor / interior uses including undercabinet lighting in kitchens, ambient accent lighting in bedrooms, lighting toekicks in bathrooms, or adding backlighting to displays, decorations, or book shelves.

12 VOLTS DC OUTPUT: Suitable for LED strip lights and other low voltage devices, such as security cameras, audio and video gear, and more; Ideal for LED installations in living rooms, shelving, lighted cabinets, toe-kicks, and more

PLUGS DIRECTLY INTO YOUR WALL OUTLET: No hardwiring, No soldering, No electrician or electrical experience required; Includes output cable with a standard 5.5 x 2.1mm DC jack (positive tip) for connecting to your strip, controller, or dimmer

USE ANYWHERE: Great for a variety of indoor / interior uses including undercabinet lighting in kitchens, ambient accent lighting in bedrooms, lighting toekicks in bathrooms, or adding backlighting to displays, decorations, or book shelves

【USE FOR 2835 3528 LED Strip】The gapless LED connector, jumper connector, and DC female and connector can use for 8mm 3528 or 2835 High Density led strip light. The DC jack splitter use for all led tape lights.

【LED Connector Kit Package Included】 8 x Gapless Connectors, 6 x LED Jumper Connector, 4 x Female and DC Connector, 2 x 2way DC Splitters. 8mm LED Connector Kit can meet almost all the needs for hanging up LED light strips.

【8mm LED Strip Complete Solution】This is a complete DIY led light strip accessory kit that provides the perfect solution for your furniture, cabinets, and more.

【Heavy Duty Tape】– Strong double sided mounting tape, 33 feet length, 0.39 inch width. Strength: Static Shear Strength 3.3lbs/.5sq inch at 72 deg F. It is ideal for mounting large and heavy tools, greenhouse tarp, teaching materials, posters, and picture frames.

【Flexible Adhesive Tape】– The double sided adhesive tape is designed to resist curling, making your installation process fast and easy, simply peel, very flexible.

【Waterproof Double Sided Tape】– Consists of a durable acrylic adhesive with viscoelastic properties, make the adhesive tape suitable for most surfaces, including installation outdoors or in damp locations. It can handle “harsh heat”.

Ultra Bright LED Lights for Room: Compared with the single-layer PCB material light strips used by other buyers, HitLights uses SMD 5050 Double PCB Board Layer carries more current for smooth and even illumination without spotting. There are no obvious color differences at both ends (Control within 10%).

Easy Installation: This all-in-one kit includes a two-step installation process, including ①UL adapter - 36W DC power supply, more durable and safe ②RF remote control - wireless and 360-degree remote control, maximum control distance 66ft ③10M strip light - Premium 10M LED strip lights with accessories, great DIY choice. Please make sure that "→" and "+" are on the same side before use.

Safe and Efficient: After HitLights test, We promise the service life of these LED light bars exceeds 30,000 hours. This means a 3-year with no-replacement guarantee. The service life is 30,000 hours when it is 100% lit, which is the best choice for improving home lighting.

【Heavy-Duty Tape】Strong double sided mounting tape, 0.4in width, 0.025in thickness. Strength: holds up to 3 Ibs per 2 inches. It is ideal for mounting large and heavy tools, strip lights, automotive trim, teaching materials, posters and picture frames.

【Flexible Adhesive Tape】The 2 sided adhesive tape is designed to resist curling, making your installation process fast and easy, simple to peel, very flexible.

【Waterproof Two Sided Tape】Consists of a durable acrylic adhesive with viscoelastic properties, making the adhesive tape suitable for most surfaces, including mounting outdoors or in damp locations. Please keep the mounting surface dry, clean and free of oil when applied, so the tape will get great against water and moisture.

【Thoughtful LED Connectorss】 With transparent design, our led tape lights connector is stylish and aesthetics, you can clearly see the inner structure and installation of this led strip connectors, convenient and quick, never waste your time.

【Wide Compatibility】2Pin 10mm led strip light connectors are suitable for most 5V 12V 24V SMD LED Tape Lights or COB LED Strip Lights. Great for living room, kitchen, bedroom, staircase, cabinet, display shelf, bookshelf, mirror, etc.

【Multiple Applications】Extending light strips, L-shaped corners, connecting power supply, or DIY decoration? They can do all your needs. Solderless LED lights Connectors can be reused, perfect for home accent lighting or commercial use.

【Designed for 10mm LED Strips】HitLights 2Pin led light connectors are suitable for 10mm COB Single Color LED Strips and SMD 2835 White LED Strip Lights. The DC jack splitter use for all led tape lights. The 2-Pin led strip light connectors kit is the perfect partner for home lighting and commercial DIY decoration.

【LED Strip Connectors Package Included】 6 x Solderless Gapless Connectors, 4 x LED Jumper Connector, 2 x Female and DC Connector, 2 x Connector with Pigtail, 1x 2way DC Splitters. 2Pin LED Connector Kit can meet almost all the needs for Flexible LED light strips.

【Universal 10mm LED Strip Complete Solution】This is a complete DIY led light strip accessory kit. No matter cabinets, wardrobes, stairs, furniture, ceilings, display stands, or various corners, our led connectors for led strip lights will always do its job brilliantly.

【Heavy Duty Tape】– Strong double sided mounting tape, 16.4 ft length, 0.94 in width, 0.025 inch thickness. Strength: Static Shear Strength 3.3lbs/.5sq inch at 72 deg F. It is ideal for mounting large and heavy tools, greenhouse tarp, teaching materials, posters, and picture frames.

【Flexible Adhesive Tape】– The double sided adhesive tape is designed to resist curling, making your installation process fast and easy, simply peel, very flexible.

【Waterproof Double Sided Tape】– Consists of a durable acrylic adhesive with viscoelastic properties, make the adhesive tape suitable for most surfaces, including installation outdoors or in damp locations. It can handle “harsh heat”.

【Heavy-Duty Tape】Strong double-sided mounting tape, 16.4ft length, 0.94 inch width, 0.025 inch thickness. Strength: holds up to 3 Ibs per 2 inches. It is ideal for mounting large and heavy tools, automotive trim, teaching materials, posters and picture frames.

【Flexible Adhesive Tape】The 2 sided adhesive tape is designed to resist curling, making your installation process fast and easy, simple to peel, very flexible.

【Waterproof Two Sided Tape】Consists of a durable acrylic adhesive with viscoelastic properties, making the adhesive tape suitable for most surfaces, including mounting outdoors or in damp locations. Please keep the mounting surface dry, clean and free of oil when applied, so the tape will get great against water and moisture.

✨【SUPER BRIGHT LED STRIPS】- Hitlights Dimmable LED Strip Light Kit with SMD 5050 RGB 150 LEDs, is ultra brighter and more durable than others. All in one kit, comes with a roll of 5m light strip, 44-key remote and IR receiver, adapter and some accessories.

✨【CUSTOM DIY COLORS】- Save Up to 6 DIY CUSTOMIZE Modes of your own! 20 multi-colors and several dynamic modes, brightness and speed adjustment just for your selection with simply a fingertag on the remote.

✨【STRONG SELF ADHESIVE】- Super Strong Self-adhesive Backing will keep your strip forever only if you use included cleaning pad to clean the surfaces where you plan to adhere the strip first. No worries of the strips falling down again!

【Voice Control, Works with Alexa, Google Assistant】 HitLights LED strip lights can free your hands to control the strip light. Voice activated to turn your lights on and off, set color, make them brighter. Currently compatible with Echo & Google Home. [NOT SUPPORT 5G WiFi]

【Music Sync LED Strip Lights】 These LED strip lights will sync with any music coming out of phone speaker or any other speaker in the room and dance the lights along with beats of music (or hands claps). This function is available on App and controller, use it to make your environment alive!

【WiFi Control via App】 The app “Smart life” does what the lights can do (turn on / off, color change and adjust brightness). They are fully RGB and via the phone app, you have all of the colors to select. You can DIY your favorite colors by mixing several colors and keep them for later use. Timer function allows you to run your home light system in smart way.

WHAT YOU'LL NEED: You will need a 12 volts Power Supply to light up your lights, or choose a dimmable driver and wire lead connector to customize your personalized lighting projects. (They are sold separately)

HIGH DENSITY LED STRIPS: Made of double sized PCB board (2835 chips), making strips more durable and reliable for long-term use. With a lifespan of over 60,000 hours. These discreet strips feature closely packed LEDs for smooth, even light without any spots

DIMMABLE AND FLEXIBLE: Our 5000K white LED tape light can be dimmable with a compatible dimmer. They are perfect for various indoor/interior uses including under cabinet lighting in kitchens, ambient accent lighting in bedrooms, toe-kick lighting in hallways, or adding a backlight source for vanity mirror, decorations, bookshelves

High Quality LED Strip Lights - Double sized PCB 2835 LED Strip Lights in 900 LED Lengths, these can provide smooth, uniform light without spotting. Get Up to 60,000 Hours(6Years) lifespan , it’s more durable and reliable for use.

Bright & Flexible LED Strips - These 24.6 Feet（7.5meter） LED light strips are great for commercial and residential use including under-cabinet lighting in kitchens ambient accent lighting in bedrooms lighting toekicks in bathrooms and more.

Cuttable And Connectable - Compatible with our High Density HitLights 10mm connector extensions and cable accessories. Simple connect - cut with a pair of scissors every inch. Working for 12V voltage, rated power 72W.

CONVERTS 120V AC to 12V DC and works with LED compatible dimmer switches from Lutron, Leviton and more. IP20 Rating, ideal for indoor use.

SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker

SCREW TERMINAL CONNECTIONS for easy installation to electrical code; See diagram in images for wiring instructions

CONVERTS 120V AC to 24V DC and works with LED dimmer switches from Lutron, Leviton and more. Please check Product guides and documents section of the page and download the user guide to match the correct dimmer switches model

SMOOTH AND RELIABLE DIMMING from 0 to 100% with no flicker. Choose an appropriate light level for any room, any mood, or any time of day

BARE WIRE CONNECTIONS AND WIRING COMPARTMENT WITH KNOCK-OUTS for easy installation to electrical code. Please check wire diagram in images for wiring instructions

300 SUPER BRIGHT 2835 LEDS for smooth and even light output without spotting. Cool White 5000K light strip is great for most residential applications. 16.4 feet per reel.

DIMMABLE with separately sold dimmer switches, HitLights dimmable drivers, or 12V DC PWM dimmers.

ADHESIVE BACKED AND CUTTABLE for quick and easy installation, no tools required. Compatible with 8mm connectors (we recommend our high density specific models) - no electrical experience required. Cut lines every three LEDs (two inches)