Best Hobbyfire in 2026

Include various of 1/4" Drive bits: 1.27mm / 1.5mm / 2.0mm / 2.5mm /3.0mm Hex Driver Bit.

The bits Made from high quality Titanium materials, resistant to stripping & breaking, rust-free, Durable.

1/4" Hex Shank, work on any 1/4 inch electric screwdriver, hand screwdriver, electric drills and air drills.

This pre-assembled slipper clutch assembly for Traxxas vehicles: Slash 4x4, Stampede 4x4, Rustler 4X4 VXL,Telluride, Rally

6878 Complete slipper clutch assembly comes with a 54-T, 32P spur gear pre-installed.Replaces entire clutch assembly

The diff gear made of metal materials and designed for lasting performance

Compatible with:Axial SCX24 1/24 RC Crawler Car Truck Models

Made of Quality Alloy

The Chassis Armor Guard Protective Plate made of quality Stainless Steel, sturdy, anti-rust and durable.

This RC chassis armor kit + Axle Protection Plate Accessories are fit for Axial RBX10 Ryft 4WD 1/10 AXI03009 AXI03005T1 AXI03005T2

Comes with installation screws, directly install in the original hole

Include various of 1/4" Drive bits: 1.27mm / 1.5mm / 2.0mm / 2.5mm /3.0mm Hex Driver Bit, M4 Locknuts Hex Nut Driver, Phillips.

The bits Made from high quality Titanium materials, resistant to stripping & breaking, rust-free, Durable.

1/4" Hex Shank, work on any 1/4 inch electric screwdriver, hand screwdriver, electric drills and air drills.

(Without pre oiled so make sure you get some before installing), Ideal Upgrade parts for 1/10 Traxxas Slash 4x4 Shocks / Rustler VXL 4×4 Shocks / Stampede VXL 4×4 Shocks / Hoss 4X4 Shocks, Replacement of Stock Part# 5862 (Notice: Not compatible with Slash 2WD, Stampede VXL 2WD, Rustler VXL 2WD, Ford F-150 Raptor)

The shock body made of lightweight Aluminum alloy material, the shock shafts made of Hardened steel, quality springs, which is durable and improves the performance of the rc trucks. Heavy duty good for big jumps

These Hop Up Option parts are CNC machined for precision,easy to install.

Length: 150mm/5.9"

Total 36 Pieces super bright LED lights,it is great for running at night or in low light areas.Compatible with Axial SCX10 90046 D90 Traxxas TRX-4 1/10 RC Rock Crawler Car.

Voltage: 5V-7.4V Input, Powered by receiver / ESC, (May Require JST Y Harness Cable)

Tires and Wheel Rims Sent Unassembled. Compatible with Traxxas TRX-4 Axial SCX10 SCX10 II SCX10 III Redcat Gen8 Redcat Gen 7 Everest and Most 1/10 RC Crawler with 12mm Hubs

The 1.9 Tires Outer Diameter: 4.7 Inch /120mm, Inner Diameter: 1.77inch / 45mm, Width: 1.77 inch / 45mm, Wheel Hubs: 12mm Hex

The 1.9 Beadlock Wheel Rims Made of Quality Metal Heavy Duty, more durable. The 1.9 Crawler Tires made of Quality Rubber, with Foam Insert. Good grip, High Performance on All Terrain,mud, loose dirt, creek bed and some slate rock,etc.

Made of quality aluminum, strong and duable

Require cross pin, bearing, spring, nut and spur gear to finish assembly, just use the stock ones

1/3 the rotational weight as the stock slipper assembly

Fits for Tamiya XV-01and TA06

Made of Quality Aluminum Alloy, easy to install

Replace original stock parts 54450

PREMIUM - Precisely machined HEX & Torx sizes. Crafted and Designed with superior materials for increased torque and unmatched hardness.

DURABLE - Industrial grade, heat treated S2 alloy steel will increase turning power. Heavy-duty, will outperform the regular cr-v or common carbon materials.

LONGEVITY - Manganese Phosphate coating for rust and corrosion protection. Plus, the chamfered edges and ball end design will provide up to 25-degree angle entry.

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

950 SPKL/9 SM N SB LONG ARM HEX KEY SET

PREMIUM - 32-Piece Allen socket set, Features a wide range of SAE & Metric Hex Bit Sockets. Crafted and Designed with superior materials for increased torque and unmatched hardness.

DURABLE - Drop-forged, Heat-treated S2 alloy steel bits, Reduce wear-outs. Hardened treated Chrome Vanadium steel hex bit socket, Increase turning power.

LONGEVITY - Complete rust and corrosion resistance with fully polished, Chrome plated mirror finish sockets and Zinc Phosphate bits treatment.

Product 1: Includes insulated Kraftform handle, interchangeable blades and pouch for convenient storage (SL/PH)

Product 1: Kraftform Insulated handle and interchangeble blade system permits rapid blade changes without special tools

Product 1: Multi-component Kraftform handle fits the shape to the hand for the ultimate in comfort and high speed torque transfer

Contains the tools needed for most small repairs around the house

Heat treated and chrome plated to resist corrosion

Securely housed in a handy blow molded case

Heavy duty CrMo steel construction

3/8 inch square drive on both ends

Fits internal hex on many late model sport bike axles and some dirt bikes

ncludes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes

Wrench tips are precision chamfered for a clean, tight fit

Made from industrial quality Bondhus Protanium high torque steel

Angle entry up to 25 degrees on sizes 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, and 10mm

The original Balldriver L-wrenches save time in hard to reach and blind locations

Tools are Made in the USA with Bondhus proprietary Protanium steel and are up to 20% stronger than competitor tools

Designed for heavy shop use

Two 15 millimeters wrench openings are oriented at 30 degree and 45 degree angles

An oversized, asymmetrical head is made from Cro-Moly steel for superior strength and durability

15° offset for better access in tight spaces

Off-corner loading design on box end provides better grip and reduces fastener rounding

Long pattern beam length for improved reach, leverage and torque

Gearwrench's off-corner loading design has an open end, stronger grip, reduces fastener rounding, and has up to 25% more torque

Gearwrench's Wrench Set has an off-corner loading design on box end for better grip and reduced fastener rounding

15° offset box end for better access

Solution to the extraneous rust problem: fasten stainless screws with stainless tools

Hex-plus allows hexagonal socket screws to live longer

Stainless l-keys prevent extraneous rust on stainless screws

9.5" OFFSET PIPE WRENCH: Easily fits around pipes with a capacity of 1-1/8 in. (29 mm) to 2-5/8 in. (67 mm)

HEX JAW MECHANISM: Provides a multi-sided secure grip on all hex nuts, square nuts, unions, and valve packing nuts

OFFSET DESIGN: Features an extra-wide opening that is ideal for securing drain nuts on sinks and tubs

Made to be the most reliable tools in the market today

Tool solutions for most all situations

Built to exceed tool standards

Unique duo flip socket design allows for quick and convenient fastener removal of 8 different tire lug nut sizes

Thin walled socket with reduced thickness allow easy access to recessed wheel nuts where space is limited

Constructed from high strength Chromium Molybdenum steel with a black phosphate finish for high resistance to corrosion for maximum socket life

Mechanics tool set comes in durable molded case for storage and tool protection

Socket sets have 72 tooth count ratchet giving a 5 degree arc swing for maneuverability in constricted areas

Hard stamped markings on sockets and wrenches for easier identification of the mechanics tools

Product 1: Includes 8-pc. 3/8 in. drive long inch hex bit sockets: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8 in.; 10-pc. 3/8 in. drive long metric hex bit sockets: 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm; Storage case

Product 1: S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time

Product 1: 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners

▲ COMPACT SIZE: The 4" long 3/8" thick driver handle is small enough for operation in confined places/ tight spaces/ tight spot where traditional bit driver, traditional ratcheting screwdriver or stubby screwdriver might be too large or bulky to fit, rendering easy fastening and unfastening with sufficient torque, especially in awkward places like U shape corner, lateral surface, etc.

▲ DELICATE MECHANISM: This multi tip right angled combination screwdriver set is powered with a 16-teeth reversible ratchet system to ensure smooth ratcheting in both directions and enable precision adjustment; and the miniature pocket size close-quarters bit driver has magnetic like clip inside the hex bit holder help keep the inserted bit tight in position

▲ COMPATIBLE FOR VARIOUS USAGE: The lightweight magnetic bit adaptor with higher levels of torque accepts any 1/4 inch hex bits of all styles. This whole set performs well in confined locations on machines, cars, boats, plane, RV, etc., or for household or work with “tight fit” repairs, installations or renovations, making it good to have around as part of an EDC and also a nice gift for professional handymen and do-it-yourselfers; this can also be transferred to a ratchet socket using adapter

CORROSION RESISTANCE: Socket sets have full polish chrome finish

MINIMAL ARC SWING: 72-tooth ratchets in 3 drive sizes come with socket set metric and standard

INCREASED TORQUE: 6-point sockets set with fastener