Best Homewerks Worldwide in 2026

FUNCTIONALITY: Homewerks Vacuum Breaker will help prevent water backflow to the main water supply. 3/4-Inch self draining vacuum, breaker, Male hose thread

PERFORMANCE: Can operate into maximum temperature rating of 180º F/82º C and maximum operating pressure rating in 125 Psi. Meets ASSE 1011/CSA B64.2, Meets ANSI/NSF 61-9

COMPATIBILITY: The ¾-Inch thread outlet is compatible with most of standard hose and end valves including hose bib, sillcocks, wall faucets and garden hose.

SLEEK DESIGN STRONG VALUE: Single hole low arc water drinking faucet. The chrome finish adds a touch of class to your kitchen sink and makes it easier to clean.

EASY STEP BY STEP ILLUSTRATED INSTRUCTIONS FOR DIY INSTALLATION. For use in any countertop up to 1-inch thick. Ideal for under counter water filters & reverse osmosis systems.

CONSERVATION OF WATER: Max flow rate of 2.2 gallons per minute helps conserve water.

Homewerks Worldwide bubbler head is made from a brass forging. It is polished and copper, nickel and chrome plated.

The water bubbler is easy to install. The bubbler is activated by a chrome plated Self-closing knob. Quarter turn drip free ceramic cartridge

The bubbler meets ASME A112. 18.1M and is ANSI/NSF 61/Section 9 Certified. Meets standard requirements for low lead

Sleek Design---Tulip kitchen faucet design make your kitchen room simple and fresh, easy to match most sink.

Multifunctional Outlet Water Effect---3 way spray setting(STREAM,SPRAY,PAUSE),stream for filling water, spray for rinsing, pause for avoiding splashing in multitask mode.CEC listed. Flow Rate: 1.8 Gallons Per Minute.

Easy to Install---Pull down hose and water Line hose altogether preinstalled in kitchen faucet to save much time under the sink,no require plumber,finish DIY installation less than 30 minutes.

A PERFECT HEIGHT - Your brushed nickel kitchen faucet features an industrial kitchen faucet open spout, 18.5” height fits under most cabinets. 10 inches deck plate included, one hole kitchen faucet or 3 hole kitchen faucet available.

SPECIFICATIONS - Spout reach 9", spout height 5", overall height 18.5". Maximum Deck Thickness: 2.5", Pre-drilled hole size requirement: 1.38"--1.5". Pull out the hose 17.7" easily reach any position of the sink.

DUAL MODE SETTING - Your kitchen faucets with pull down sprayer provides soft aerated stream and splash-free powerful spray due to its hard rubber sprayer holes. 360 degree kitchen sink faucets sprayer, the switch can be placed in every position as you like.

We develop kitchen faucet that you can rely on, and we understand that functionality and dependability are achievable without drastically higher prices. If you’re on the hunt for the perfect faucet, We are Here!

Sprayer features push button controls to move from an aerated stream to a powerful spray, Pause button able to stop the flow of water from the spray head without turning off the faucet, Spout swivels 360 degrees to cover the entire sink. if you prefer a clean sink deck without a sidespray or additional accessories, a pull out faucet may be the right solution.

FORIOUS's Upgraded 3.0 Drip-free ceramic disc mixing valve cartridge Technology utilizes a ceramic disc valve with a real diamond coating to produce a faucet that will last up to 5 million uses. That's an amazing 10 times the industry standard, guaranteeing a lifetime of leak-free, trouble-free performance.

【 WHO WE ARE 】 Open and close is the most bored application in the faucet, You don’t know how much we care about your life.

【 WE CARE ABOUT YOUR HEALTH】Eco-friendly SUS 304 stainless steel pull out kitchen faucets, complied with lead-free regulation, put your family's health first.

【 WE CARE ABOUT YOUR EXPERIENCE】Adjust water pressure and temperature with the integrated single handle kitchen faucet, with 3 setting modes (STREAM/ SPRAY/ PAUSE). Firmly matte black treatment, effective anti-corrosion and anti-rust, high temperature resistant hose. CEC listed. Flow Rate: 1.8 Gallons Per Minute.

Bolted Components: Inlet & outlet strengthened in the newest version of our dual water hose connector. After many months of lab trials, our expert engineers have completely reconstructed critical components of the splitter. The 2 spouts are now fastened with metal bolts, and won’t disconnect. The neck is affixed with threads, anchoring the two parts.

Seamless Installation, Smooth Operation: The 2 way garden hose splitter has long handles (4 cm) which allow for smooth and easy shut on and off. Because the splitter is coated with rubber, it is ideal for stiff hands or hands with arthritis. Other than a basic understanding of how spigots and hoses work, no tools are needed, ensuring an easy and flawless installation. The water hose splitter is also able to rotate 360 degrees, allowing you to tug and pull hoses in all directions.

No Leaking and Watershed: Long and smooth thread with rubber ring at female end will make leaks a long forgotten experience. Full rubber cover makes working with the y garden hose splitter easy in all kinds of weather.

A PERFECT HEIGHT - Your black kitchen faucet features an industrial kitchen faucet open spout, 18.5” height fits under most cabinets. 10 inches deck plate included, one hole kitchen faucet or 3 hole kitchen faucet available.

SPECIFICATIONS - Spout reach 9", spout height 5", overall height 18.5". Maximum Deck Thickness: 2.5", Pre-drilled hole size requirement: 1.38"--1.5". Pull out the hose 17.7" easily reach any position of the sink.

DUAL MODE SETTING - Your kitchen faucets with pull down sprayer provides soft aerated stream and splash-free powerful spray due to its hard rubber sprayer holes. 360 degree kitchen sink faucets sprayer, the switch can be placed in every position as you like.

SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs

VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**

VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe

EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

SHARKBITE BRASS CRIMP TEE: This SharkBite brass crimp tee coupling is a full-flow fitting that is used to make a connection between two PEX pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp tees work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These crimp tee connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

Female thread and male thread with 90 degree for connecting pipe; hard connect way so it does not need sealing for most situation;

Meet NPTF requirement of US, better than NPT thread, could be used as NPT thread, too;

Good raw material brass, high corrosion resistance, low magnetic characteristics and high temperature ductility;

PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

Easy to Match---Proper faucet size and water outlet angel fit most of sinks,save your time to make choice.

Easy to Install---Pull out and water line hoses pre-install in kitchen faucet, finish DIY like a breeze, save much installation time under the sink and plumber fee.

Easy to Use---Three functions outlet water effect meet varies of wash requirement. High arch design make high pots and pans rinsing available.Single handle integration design control water temperature and flow volume more convenient.Physical and optimized weight retraction system let sprayer head always precisely sit back to spout after use.

SHARKBITE BRASS CRIMP ELBOW: This SharkBite brass crimp elbow coupling is a full-flow fitting that is used to make a 90-degree connection between two pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp elbows work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These 90-degree elbow connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

SHARKBITE BRASS CRIMP TEE: This SharkBite brass crimp tee coupling is a full-flow fitting that is used to make a connection between two PEX pipes of the same sizes using copper crimp rings or stainless steel clamps

COMPATIBILITY: Brass crimp tees work well with PEX and PE-RT pipes

DURABLE AND HIGH QUALITY: These crimp tee connectors are made from lead-free DZR brass for long-lasting reliability; corrosion free and with no scale build-up

Adapts 1/4" NPT male end to 1/4" tube size female end at a 90-degree angle

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

For use with LP and natural gas, refrigeration, and hydraulic applications

REDUCER PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

BRASS TEE: Tee Fitting features innovative push-to-connect design makes for quick and easy installation when joining same-size pipe; ideal for use in tight spaces

VERSATILE: Tee coupling is compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground) **Requires a stiffener when conencting to PEX pipe (Sold separately)

EASY TO INSTALL: SharkBite plumbing fittings do not require any soldering, glue, or crimping for installation; can be installed in wet lines

SHARKBITE BRASS PUSH WASHING MACHINE VALVE: The SharkBite washing machine straight valve can be used in washing machine installations with no washing machine outlet box; ideal for working in tight spaces

VERSATILE: This plumbing valve can be mounted to a stud or joist, and features a 1/2-inch push-to-connect inlet that works well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; features a quarter-turn angle water valve with mounting brackets

EASY TO INSTALL: The innovative design of the SharkBite brass push washing machine valve allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs

INSTALLS IN SECONDS: 1/4 inch 90 degree elbow pipe connector requires no soldering, crimping, or glue; Just push to create a watertight seal

VERSATILE: Fits copper, CPVC, and PEX pipe and connects all 3 types in any combination

HIGH QUALITY: SharkBite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand that can ensure clean, leak-free connections

REDUCER PIPE CONNECTOR: Brass pipe connectors are perfect for making easy connections between same-size pipe; ideal for use in tight spaces **Large diameter fittings (1-1/4 to 2 inches) require a Stiffener (sold separately) when connecting to PEX pipe**

VERSATILE: SharkBite plumbing fittings are compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe; approved for underground and behind-the-wall applications with no access panels (Wrapping required when burying underground)

EASY TO INSTALL: Straight coupling can be easily installed without the need for soldering, glue, or additional tools; can be installed in wet lines

INSTALLS IN SECONDS: Repair with no special tools, soldering, crimping, or glue; Just push to create a quick watertight union with SharkBite pushfit connectors

VERSATILE: SharkBite plumbing fittings fit copper, CPVC, and PEX pipe and connect all 3 types in any combination

LEAD-FREE: Made of high-quality forged DZR brass that is lead-free. Ball valves, shutoffs, and compression fittings, are safe for potable water lines

SHARKBITE COPPER CRIMP RING: This SharkBite crimp ring crimp brass or poly PEX crimp fittings onto PEX or PE-RT pipe; available in 3/8 inch to 2 inch sizes

VERSATILE: This crimp ring works well with brass or poly PEX crimp fittings; crimp to create a watertight seal without soldering or glue required

DURABLE: Crimp rings are made from copper for stronger durability

SHARKBITE COPPER CRIMP RING: This SharkBite crimp ring crimp brass or poly PEX crimp fittings onto PEX or PE-RT pipe; available in 3/8 inch to 2 inch sizes

VERSATILE: This crimp ring works well with brass or poly PEX crimp fittings; crimp to create a watertight seal without soldering or glue required

DURABLE: Crimp rings are made from copper for stronger durability