Best Htracing in 2026

Fit for 2011-2018 Dodge RAM 1500 2500 3500

Material:ABS plastic

Easy installation.3M automative adhesive tape is attached

【Function】Built-in diaphragm, through the pressure valve switch, make the fuel pressure stable delivery.

【Material】Fuel pressure regulator: high quality T6061 Aluminum; Hose: 304 stainless steel & CPE synthetic rubber.

【Adjustable】From 0 psi to 140 psi Maximum Fuel Pump Capacity.

🌰【Applicable Models】Compatible with honda civic sedan 10th Gen 2016 2017 2018 2019 2020 2021, not for coupe or hatchback models.

🌰【Equipped with Tape】Non-destructive modification, will not damage your car. Please clean the window louver and heat the tape slightly for better bonding.

🌰【High Quality】Made of ABS plastic, sturdy and durable, matte textured surface,without leaving fingerprints.

💎[Hydraulic Valve Lifter] The valve clearance is adjusted hydraulically, eliminating the need for adjusting screws and nuts, and reducing engine noise.

💎[Fitment] Compatible with Chevrolet GMC Buick Cadillac GM 4.8L 5.3L 6.0L 6.2L 2007-2012.Fit For ALLURE ESCALADE AVALANCHE CAMARO SILVERADO SUBURBAN TAHOE SAVANA SIERRA YUKON.

💎[Compatible with GM] Replaces 12569256, 12571595, 12632143, 12619820, 12639516, 12645725, 12680871, 17122490, 17120735, 12499225, 12576400, 12648846, 25341990, 5235498, 5234890, 5234670, 5233745, 17121905, 17120090, 17089852, 5234660, 17109057.

🌰【Applicable Models】Compatible with honda civic sedan 10th Gen 2016 2017 2018 2019 2020 2021, not for coupe or hatchback models.

🌰【Equipped with Tape】Non-destructive modification, will not damage your car. Please clean the window louver and heat the tape slightly for better bonding.

🌰【High Quality】Made of ABS plastic, sturdy and durable, Polished surface,without leaving fingerprints.

[Name] Cylinder Head Gasket Full Set Fit For LS 4.8 5.3 engine 2002-08.

[Model] Compatible with Buick Rainier, Compatible with Cadillac Escalade, Compatible with GMC Envoy Savana Sierra Yukon, Compatible with Isuzu Ascender 2002 2003 2004 2005 2006 2007 2008 4.8L 5.3L

[Direct Replacement] Compatible with Chevy Avalanche Express Silverado Suburban SSR Tahoe Trailblazer 02 03 04 05 06 07 08 4.8L 5.3L

The front bumper lip splitter protector is made of high-quality ABS which has good durability, corrosion resistance, impact resistance, heat resistance, and low-temperature resistance. Makes your car cooler and out of the ordinary while protecting the bumper of your car.

The front bumper lip splitter protector is compatible with 2015-2022 Charger SRT Hellcat / SRT 392 / Scat Pack / RT Scat Pack, 2019-2022 Charger GT / RT. Not fit SXT, SXT Plus, SE, RT Road & Track, Pursuit, Enforcer models!!!

Easy Installation, there is no drilling or cutting required.

🛡️Application: 50mm In-line fuel filter is designed for carburetion and EFI fuel system, suitable for gasoline, E85 ethanol fuel and diesel. With 6AN 8AN 10AN adapters, it can be applied to most vehicles.

🛡️Function: Capture pollutants before they enter the fuel delivery system to improve engine performance and keep the engine clean.

🛡️Filter: With a reusable 100 micron stainless steel mesh element. It can be used in both directions, and it will be better to clean from the inside of the filter element to the outside.

√【Feature】Prevent heat-related transmission failures, extend transmission life, and improve transmission performance Embossed turbulators inserted into each tube agitate the fluid for maximum heat transfer. Extruded plastic heat sink shields.

√【Transmission cooler】 Transmission cooler is made of lightweight aluminum alloy T-6061, which enables it to withstand harsh working environments. The hose test pressure: 145psi. Hose working temperature: -40°F to 176°F.

√【Copper Tubing】 This Tube & Fin transmission cooler features copper tubing expanded into aluminum cooling fins and includes embossed turbulators which serve to agitate fluid for maximum heat transfer. Perfect for today's highly-stressed compact cars and SUVs', they improve shifting performance and extend

[What you get] 1pc 16 row stacked-plate oil cooler(inlet/ outlet: 10 AN, oil capacity: 0.39L); 2pcs AN10 braided fuel lines hoses (3.94ft& 3.28ft); 1pc 3/4 mounting nut adapter; 1pc m20*1.5 mounting nut adapter; 1pc oil filter sANdwich adapter; 1pc fuel hose clamp.

[What it will do] Help reduce the coolant temperature, keep the oil low, prevent damage or jam the engine, thereby extending the life of the engine.

[Why choose us] Made with high-quality t-6061 aluminum. This stacked plate oil cooler condenser can have greater cooling efficiency in a limited space, is lightweight and efficient, and can meet more needs.Fuel line working pressure: 500 psi. Fuel line working temperatures: 40℉ to 257℉(-40℃ to 125℃).

【Compaitble】Kit AN10 turbine steel braided oil drain return line for T3 T4 T3/T4 T70 T66 to 4E.

【Oil Supply Line】Made of 3/8 diameter braided stainless steel, braided design to maximize durability, 1/8 NPT adapter has a limited oil flow design inlet adapter explosive nut, bolt, and washer

【Reliability】Helps to circulate the oil from the turbocharger to the oil sump, has an anodized appearance, can provide the best cooling performance on the turbocharger to extend the service life, and the air inlet adapter can limit the oil flow, Effectively prevent oil seal damage caused by excessive oil pressure

【Application scope】Billet Fuel Rail Kit is only suitable for LS LS1 LS2 LS3 LS6 after-sales intake manifold, not suitable for inventory manifold/oem equivalent, not suitable for fast intake manifold

【Process】The billet fuel rail is CNC machined to precise tolerances, and then anodized to obtain a dignified appearance

【Features】These aluminum EFI fuel rails are specially designed for OE-type LS intake manifolds and can supply air to more than 1,100 HP engines.

💎[Name] Active Fuel Management Valve Lifters, Hydraulic Lifters,AFM DOD Lifters,Engine Valve Lifter, Hydraulic Tappet, Hydraulic Lash Adjusters.

💎[Hydraulic] The valve clearance is adjusted hydraulically, eliminating the need for adjusting screws and nuts, and reducing engine noise.High quality, direct replacement, easy to install.

💎[Fitment] Hydraulic AFM lifters compatible with 5.3L 6.0L 6.2L Chevy GMC Cadillac Buick Isuzu Saab 2005-2018, LS V8 Engines with AFM.

Certified Original Nagoya Antenna - with an exclusive manufacturing partnership with BTECH

New Release - May Require a Rubber spacer (included) and has an extended antenna cover to protect your radio SMA male base from the elements

Triband: 2m-1.25m-70cm; *Gain (relative): +2.15dBi; Watts: 10; Height: 17.7"; Connector: SMA Female; *Rated against typical stock HT antennas.

Certified Original Nagoya Antenna - with an exclusive manufacturing partnership with BTECH

New Release - May Require a Rubber spacer (included) and has an extended antenna cover to protect your radio SMA male base from the elements

This antenna is almost 16 inches long and is a must for outdoor and camping usage. This is a soft flexible antenna able to withstand more 'roughness' than a stock radio antenna, all while boosting the signal of your radio significantly!

CAR WASH PROOF – Car washes are grave yards for antennas! Just time before long factory antennas bend and snap! Our redesigned 6 3/4" now stouts a new level of strength, so much so that we guarantee and replace any that break in a car wash within 2 full year from purchase date. If it breaks, we issue a replacement. Its strength is Tried, Tested and Proven. Same Superb Reception, New Strength Standards!!! (More details below)

STRENGTH - 304 Stainless Steel Threading; Made in Wisconsin! The connection to your vehicle is crucial, weak brass threading often snaps leaving you extracting broken pieces out of your antenna base. Rest assured our stainless steel threading will confidently secure your new antenna. Durable EPDM rubber construction; Specially formulated flexible rubber specific for the application of an antenna, withstanding temperatures of 257 degrees Fahrenheit.

UNMATCHED RECEPTION / SUPERB PERFORMANCE - Our 6 3/4" German Engineered Antenna uses choice quality materials, including a highly conductive Internal Copper Coil. While most short antennas are constructed of aluminum or steel, our copper coil is up to 85% more conductive allowing it to pull in stations most short antennas simply dream of. Simple Science, Real Results.

✔ 8K 4K and FULL HD COMPATIBLE: This indoor TV antenna is designed to provide you with high-quality HD channels, regardless of the type of TV you own, this digital antenna for TV will work seamlessly with it, providing you with a crystal-clear viewing experience. The channels you can expect to receive include popular ones like ABC, CBS, NBC, PBC, and Fox, among others. Moreover, the antenna eliminates monthly cable bills, saving you money each and every month.

✔ ANTIER CRYSTAL CLEAR PICTURE: The quality and signal range of these Antier TV antennas are exceptional. With a range of up to 350+ miles, the TV antenna for smart TV effectively filters out cellular and FM signals, providing you with a clearer picture and high voice quality with minimal noise. This results in a crystal-clear viewing experience for all major HD channels. Our company's advanced technology guarantees minimal interference and maximum reception.

✔ AESTHETIC APPEAL: The Antier antenna TV digital HD indoor boasts a unique design that combines practicality with stylish appeal. Its compact and sleek size allows for easy placement near the TV or near a window for improved reception. This indoor antenna provides a sophisticated and attractive solution compared to outdated and unsightly outdoor TV antennas, making it one of the best valuable addition to any home's aesthetic.

✔ IMPROVE THE LOOK OF YOUR MAZDA 5: The Stubby antenna replacement fits any Mazda 5 (1999-2015). The Stubby is designed to match the factory base perfectly so it looks as good as the stock antenna on your car

✔ INSTALL IN SECONDS: You won't need any tools. The Stubby is easy to install by hand in a matter of seconds

✔ MADE IN USA: Each Stubby is made here in the US of A. They are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!

✔ STAND OUT - This Chevy Silverado & GMC Sierra/Denali Antenna will surely set your truck apart from all the rest! Ditch the long, boring whip antenna & add attitude to your Chevy or GMC pickup truck.

✔ ANTI THEFT & ANTI CHIP - Comes with pre- applied thread locking compound to deter people from taking your Chevy Silverado Bullet Antenna. Made with 6061 Billet Aluminum Construction and Hard Anodize Black finish that will not chip or fade. Completely carwash safe. Same dimensions as a real 50 Cal bullet!

✔ EASY INSTALLATION - Unscrew original antenna and screw the new Bullet Antenna in by hand, no tools required! Replaces the existing hood mounted antenna in five minutes or less.

FOR ANY 1/2" HOLE

FITS ALL FIRESTIK ANTENNAS AND MOUNTS

BULK ITEM. NO RETAIL PACKAGE

Factory Antenna to Aftermarket Radio Adapter

For select 1988-2005 Audi/BMW/Mercedes vehicles

Factory antenna with flat plug to aftermarket radio

Application: Used to connect factory GPS antenna installed in your vehicle to aftermarket head unit navigation radio stereo

Connector 1: Fakra plug blue code C; Connector 2: SMA male plug

Cable type: coax rg174; Cable length: 15cm/ 6 inches

Fitment: This 7 inch car antenna replacement fits 2011-2012 Jeep Liberty/ 2011-2013 Jeep Grand Cherokee/ 2014-2022 Jeep Cherokee/2012 Jeep Grand Cherokee 4x4/2014 Jeep Cherokee Trailhawk/2012 Jeep grand Cherokee Laredo/2014 jeep cherokee latitude/2012 jeep Cherokee overland/ 2018 -2022 Jeep Compass/ 2016-2018 Jeep Renegade/ 2011-2014 Chrysler 200/ 2011 Dodge Nitro/ 2013-2016 Dodge Dart/ 2011-2014 Dodge Avenger/ 2010-2017 Dodge Journey/ 2011-2013 Dodge Durango/ 2016-2019 Fiat 500, 500L.

Usage: BASIKER auto antennas are used to receive car radio signals, support AM FM CB frequency, and do not affect the use of GPS and other devices.

Material: We used the most durable Thai rubber to make the outside of this Jeep cherokee accessories antenna. Elastic and not worried about bending caused by car wash. The material used to receive the signal inside is made of high-quality copper from Chile.On the basis of high quality signal reception, the car roof antenna jeep can be used for a long time.

🚗【Vehicle Fitment】- BASIKER off road car jeep antenna replacement fits for 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2019 2020 2021 2022 2023 Jeep JK JKU JL JT JLU Sahara Rubicon Sport Unlimited 4xe Willys Mojave Gladiator Wrangler antenna works well on your car.

🚗【Strong Reception】 - BASIKER jeep wrangler antenna for is designed for optimized car radio AM FM reception and does not affect the use of GPS and other devices. The copper coil made the radio antenna perform better in reception than other low profile antennas. You can enjoy clear reception from a lot of local radio stations.

🚗【Premium Material】- Chilean copper core and Thai rubber make the spiral jeep gladiator antenna long-term use on the basis of high-quality signal reception, reducing damage and loss caused by bad weather and car wash.

Extra Wide Digital Mirror Rearview & Navigation Monitors

Chrysler/Dodge/Jeep

Male to female adapter

Dual Band Base Vertical 146/446MHz

Gain: 146MHz 3.0dBi, 446MHz 6.0dBi

VSWR: 1.5:1 or less, Max Power: 200 watts SSB/100W FM

Antenna To Radio Adapter Cable

For 2002-Up Chrysler, Dodge, Ford, And Jeep Vehicles With Snap-Lock Factory Antenna

Adapter To Aftermarket Radio

✔ IMPROVE THE LOOK OF YOUR FORD FUSION: The Stubby Jr antenna replacement fits any Ford Fusion (2005-2019). The Stubby Jr is designed to match the factory base perfectly so it looks as good as the stock antenna on your car

✔ INSTALL IN SECONDS: You won't need any tools. The Stubby Jr is easy to install by hand in a matter of seconds

✔ MADE IN USA: Each Stubby Jr is made here in the US of A. These mini antennas are machined and powder-coated in good ol' Portland, OR. Even the boxes are made here!

✔ IMPROVE THE LOOK OF YOUR FORD EXPLORER: The Bullet Style Stubby antenna replacement fits any Ford Explorer (1995-2010). The Bullet Stubby is designed to match the factory base perfectly so it looks as good as the stock antenna on your car

✔ INSTALL IN SECONDS: You won't need any tools. The Bullet Style Stubby is easy to install by hand in a matter of seconds

✔ MADE IN USA: Each Bullet Style Stubby is made here in the US of A. They are machined and anodized in good ol' Portland, OR. Even the boxes are made here!

PROTECT YOUR INVESTMENT - Instead of slamming your whip into every low hanging tree branch, a spring base reduces the damage done by impacts by allowing the whip to bend and flex out of the way.

FLEXIBLE - High speeds and corners can do a number on your whips and antennas, testing them to the limit of their flexibility. A sturdy spring base can take a lot of the stress of your equipment during hard highway or off-road use.

HEAVY-DUTY - With a beefier 1/2" x 20 thread, this spring base is suitable for LED whip, fiberglass CB antenna, center load antenna, 102" whip, and so much more.