Best Hurotoms in 2026

💛【Package Content】2 × 17" 55 Lbs/245N Gas Struts;4 × Ball Studs.NOTE: If the lid weight is less than 44Lbs or more than 61 pounds, please choose other pressure struts!!!

💛【Product Parameters】This Set of 2pcs 17" Lift Supports Extended size 17.1 inch(434mm), Compressed size 10.2"；Force: 55 Lbs Per Strut, two are 110Lbs.

💛【Application】Gas Struts are usually used for your ARE ATC Leer Camper Shell Awning Snugtop Topper Canopy Truck Cap Pickup Window RV door or Toolbox Lid etc.

【Package Content】-- 2 × 10in 40 Lbs/178 N Gas Struts; 4 × mounting brackets.

【Product parameters】-- Extended Length: 10.00 Inch, Compressed Length: 6.6 Inches; Force 178N/40Lbs Per Shock.

【Application】-- 10" 40Lb/178N Gas Prop Shocks will help you support the Truck Toolbox, Wooden Box, ATV Vehicles, Cabinets lid or door, RV Vehicles, and many other DIY application.

★Must-read Parameter--Extended Length: 14.96in. Compressed Length: 9.06in; Force: 22.5 Lbs per shock. End fitting: 10mm Ball Stud Mounting Bracket.

★Application Range--Most suitable support weight is 17-25 pounds! If your lid weighs more than 25 pounds, please install two strut or select other stronger set.

★Where you use them?-- these gas shocks could be used on RV bed Storage, toolbox lid door, Lightweight Cabinet lid, boat hatch door, toy box and other DIY project.

【Package Content】-- 2 × 18.5" 40Lbs/178N Gas Struts; End Fiting: 10mm Ball Stud Sockets

【Product Parameters】-- Compressed Length (Center-to-Center): 10.7", Extended Length (Center-to-Center): 18.5", Force: 40Lbs/178 N (Per Strut)

【Easy Installation】-- Instructions Included, Screws Included.We have installation quick guide for you. If you have question about the strut force or any other question, please contact us.

FITS ---- These 10mm ball stud brackets are the hardware you'll need when installing a gas spring Shock Struts.

STYLE ---- Made of steel and zinc plated. Excellent corrosion resistance.

USE ---- Auto, Boats, Cabinets, Camper, Cars, Chutes, Desks, RVs, Truck Boxes, Trucks, Trailers, Tonneau Covers, Tool Boxes, Toy Boxes, Trash cans, Trap Doors, Tornado Shelters, Vehicle, and the list goes on.

【PRODUCT PARAMETERS】-- Extended Length: 28 inch. Compressed Length:16.5 inch ; Force: 200 Lbs per shock.

【WARM TIPS】-- 200 Lbs Per strut, two are 400 Lbs, strong enough!! (WARM TIPS: You couldn’t compress it by your hand!!!)

【APPLICATION SCENARIO】-- Most Used for Heavy-Duty equipment such as bed with a small compartment, outdoor TV Cabinet, marine projects, heavy toolbox lid, camper shell, truck canopy, trap door, trailer door, trash bin, and other custom Medium or Heavy equipment.

🚗🚗Package includes 2 Pcs Front Hood Lift Supports. Compatible with Dodge Ram 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 Dodge Ram 1500/2002-2010 Dodge Ram 2500/2002-2007-2010 Dodge Ram 3500/2008-2010 Dodge Ram 4500/2008-2010 Dodge Ram 5500

🚗🚗High Quality OEM Replacement Dodge Ram Hood Struts, Exact Fit Original Equipment 55276321AA, 55276321AB, 55276321AC, 8196174, 95980, SG314036, 4364

🚗🚗Easy to install. No special tools required. Dodge Ram Hood Struts' Extended Length [in]: 18.98 (Center to Center), Compressed Length [in]: 11.21 (Center to Center)

OE replacement lift supports, easy fit

Compatible with dodge ram 1500 2500 3500 5500 2002-2010

Reference Number: 55276321AA,55276321AB,55276321AC, SG314036, 4364

Perfect fits for Acura TL 2006 2007 2008 Front Hood Lift Struts, Interchange Number: PM1019 74149-SEP-H01;

Vehicle Location: Front Hood of 2006-2008 Acura TL; 2 shocks are included per set, if there are parts missing, please click ASK SELLER besides your order from us and tell us your issue, we will resend a replacement set for you!

Extended Length A [in]:14.17,Compressed Length B [in]:9.55, , please measure the extended length (from hole to hole NOT tip to tip) of your old struts before purchasing

Placement on Vehicle: Front; Part Brand:Hood Lift Supports Struts; Other Part Number: 7992XW,55276321AB,SG314036,8196174,014280, 4364

Replacement for Dodge Ram 1500 02-07 Base Sport Utility Pickup 2-Door/4-Door Hood, 02-07 Hemi Sport Crew Cab Pickup 4-Door Hood, 03-07 Hemi Sport Standard Cab Pickup 2-Door Hood, 02-07 Laramie Crew Cab Pickup 4-Door Hood, 02-07 Laramie Extended Crew Cab Pickup 4-Door Hood, 02-07 Laramie Standard Cab Pickup 2-Door Hood, 04-07 Rumble Bee Standard Cab Pickup 2-Door Hood, 02-07 SLT Crew Cab Pickup 4-Door Hood, 02-07 SLT Extended Crew Cab Pickup 4-Door Hood

Replacement for Dodge Ram 1500 02-07 SLT Standard Cab Pickup 2-Door Hood, 02-07 SRT-10 Crew Cab Pickup 4-Door Hood, 02-07 SRT-10 Standard Cab Pickup 2-Door Hood, 02-07 ST Crew Cab Pickup 4-Door Hood, 02-07 ST Standard Cab Pickup 2-Door Hood, 02-07 Sport Crew Cab Pickup 4-Door Hood, 02-07 Sport Standard Cab Pickup 2-Door Hood, 02-03 TRX4 Crew Cab Pickup 4-Door Hood, 05-07 TRX4 Crew Cab Pickup 4-Door Hood, 02-07 TRX4 Standard Cab Pickup 2-Door Hood

Placement on Vehicle:Hood/Front

Extended Length:20.20" Compressed Length:12.18"

Easy to install with simple hand tools in just minutes

【Directly Fit】OE replacement lift supports, easy fit. Easy to install with simple tools in just minutes. No special tools required for installation.

【Vehicle Fitment】Compatible with Honda Accord 2003-2007

【Reference Number】74195SDBA02, 74145SDBA02, PM2024, SG326013, 4157

✅For Jeep Wrangler Window Shocks -- Exact-fit replacement lift support struts shocks for your worn-out factory parts of Jeep Wrangler 1997-2006;

✅Interchange Part Number-- SG214012, 4249, 8195729, 10663, 2884NY, 55076310AD, 55076310AB, 72236, RB8795749, 95749, 610665;

✅Vehicle Location-- Rear Window Glass of Jeep Wrangler 1997-2006;

Placement on Vehicle: Hood

Fitment: 1999-2004 Jeep Grand Cherokee

Extended Length [in]: 11.33 Compressed Length [in]: 7.37

CHECK YOUR LENGTHS AND PRESSURE BEFORE ORDERING. THESE ARE NOT COMPATIBLE WITH ALL SNUGLID TONNEAU COVERS! THE MEASUREMENTS ARE FROM CENTER OF BALL MOUNT TO CENTER OF BALL MOUNT, NOT FROM END TO END OF STRUT! SEE PICTURE!

Placement on Vehicle:Liftgate

Extended Length:24.65" Compressed Length:16.3"

Easy to install with simple hand tools in just minutes

FITMENT - Lift supports struts for 2002 2003 2004 2005 2006 2007 2008 2009 2010 Ford Explorer, 2002 2003 2004 2005 2006 2007 2008 2009 2010 Mercury Mountaineer Compatible with 4142 SG404025 lift support strut

QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications

FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head

Fits: 2012-2016 Subaru Impreza 5-Door Wagon, 2013-2017 XV Crosstrek

Replacement For: Rear Liftgate, Hatch

Force Per Shock (Newtons): 485N , Force (Lbs): 218

Placement on Vehicle: Back Glass

Fitment: 2000-2006 Cadillac Escalade; 2003-2006 Cadillac Escalade ESV; 2002-2006 Cadillac Escalade EXT

Fitment: 2000-2006 Chevrolet Suburban 1500; 2000-2006 Chevrolet Suburban 2500; 2000-2006 Chevrolet Tahoe; 2000-2006 GMC Yukon; 2000-2006 GMC Yukon XL 1500; 2000-2006 GMC Yukon XL 2500

✔ BOLT IN SYSTEM - Engineered to utilize existing mounting locations on your Focus. Simple one-handed operation, simply start to lift the hood and it will raise to the stock height unassisted in a smooth and controlled motion. Redline Tuning is the leader in aftermarket Hood QuickLIFT systems, selling our systems worldwide since 2002.

✔ PROGRESSIVE RATE GAS SPRINGS - Redline Tuning gas springs are not off the shelf parts, they are designed by us and manufactured to our specifications for each vehicle application. Our exclusive end-of-force dampening slows the rate of extension over the final inches of travel eliminating stress to the hood.

✔ DESIGNED AND MANUFACTURED IN THE U.S. - All components in our QuickLIFT systems, including our documentation will ship from our office in Ann Arbor, Michigan. Full color manuals will arrive that will walk anyone through this simple installation - our customer comes first.

YHTAUTO Affordable and Prime Lift Support Shock Struts, Directly Fit

Fits Mitsubishi Outlander 2003-2006 Sport Utility

Location: Tailgate, Rear Left and Right

Interchange Part Number: 6358, 8506IB, SG387004, BKK780010, 5H2216E610AA, 32030482, C16-15124, C1615124, 6358

Placement on Vehicle: Front Hood Lift Supports Damper Struts Props

Specifications: Extended Length (inches)15.75, Compressed Length (inches)9.76

FITMENT - Gas struts shocks lift supports for Jeep Grand Cherokee 1999 2000 2001 2002 2003 2004 Compatible with SG404018 4048 lift support strut

QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications

FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate hatchback doors while they are open, no need to hold the door up with your head

Cross Reference Part Number: 4856-57, 4856, 4857, 8195551, 8195552, Interchange Part Number: 10656, 10655, 8561IR, 55074782AB, 55075704AB, G0004857AB, G0004856, 55075705AB, 55074783AB, 55075761, 55075760, 55075704, 901297, 72761, RB8795572, 95572, 612881

Specifications: Extended Length (inches)18.66; Compressed Length (inches)13.11

Placement on Vehicle: Rear Liftgate Hatch Tailgate Lift Struts Supports Shocks Damper Props Rods

Pls check our production description to make sure our lift support fit your vehicle

Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications

Extended Length:17.42[Inch] Travel Length:6.25[Inch] Pounds Of Force:33[LBS]

Fitment: Compatible With HHR 2006 2007 2008 2009 2010 2011

Interchange Part Number: 6123,SG330082, 024984,7595UU, 22734941, 25992461, RB8795415,95415

Specifications: Extended Length (inches)23.27, Compressed Length (inches)14.76

Qty: 2pcs; Placement on Vehicle: Front Hood Gas Charged Lift Supports Struts Props Rods Arm

Specifications: Extended Length (inches)15.24, Compressed Length (inches)11.73

Interchange Part Number: SG430094, 6330, WGS-431

Placement on Vehicle: Rear Window Left & Right

Fit For:1999-2004 Grand Cherokee

Reference Number:4528,SG314022,819-4741,762416,55136761AB,55136965

Placement on Vehicle: Rear Hatch Liftgate Tailgate Lift Supports

Part Number: SG314044; Interchange Part Number: WGS-197, 025608, 025816, 10140350, 10140351, 3568YM, 55394323AA, 55394322AA, 68025358AA, 680253359AA, 68025358AB, 68025359AA

Specification: Extended Length: 19.96 inch; Compressed Length: 11.89 inch

【Perfect Fitment】Compatible with BMW E60 525i, 525xi, 528i, 528i xDrive, 528xi, 530i, 530xi, 535i, 535i xDrive, 535xi, 545i, 550i, M5 --- Front Hood

【Reference Number】Replacement for 8196227, 0583WD, PM3669, 570519

【About Package】Package includes 2 pieces Lift Supports. Strong package with thick cardbord and air column bag, which provides shock absorption and protection during transportation.