Best Ihurllu in 2026

◀ Specification ▶ This balanced 1/4inch to 3pin XLR Male cable is 10FT long. The wire is nylon braided, it's strong and heavy duty. 1/4inch plug is gold plated, signal can go through gold plated plug with less lose. This TRS plug is also drag-proof design, the plug tail will hold the wire tightly, so the wire won't be pulled out easily. With drag-proof design, the cable can last much longer. It's also strong enough for long distance transmission.

◀ Noise Free ▶ This TRS to XLR male cable is full covered with spiral OFC(oxygen free copper) inside. Under the OFC shield, there is aluminum foil. With this two layer, the cable can keep out RFI and EMI efficiently. You don't need to worry about hum or buzz any longer. Anyway, we do not suggest to put this cable over adapters, plugs, and others which put out heavy RFI and EMI.

◀ Not Use for Guitar ▶ This quarter inch to XLR male cable doesn't have impedance matching transformer inside, it's not suitable for High-Z output instrument like guitar and bass. Guitar and bass signal should go into 1/4" instrument jack, but not XLR jack. 1/4inch TRS male to XLR male cable is usually used on mixer, audio interface, preamp, speaker, studio monitor, etc.

◀ TS XLR female cable ▶ Unbalanced 1/4inch to XLR female cable is used to output XLR microphone signal to audio equipment with 1/4" MIC jack. This microphone cable is mostly used on karaoke machine, powered speakers, home studio, DJ mixing console, etc.

◀ Important notification ▶ Please do not use this cable to link a wired microphone to a 1/4" LINE IN Jack. Due to mis-match impedance issue, the LINE IN jack won't receive clear signal.

◀ Specification ▶ This unbalanced 6.35mm to XLR female cable is 6.6 feet long. The wire is nylon braided, it's super strong and heavy duty. The cable is thick but will give a flexible feeling. The core conductor is full covered with spiral OFC (free oxygen copper), under this OFC layer there is also an aluminum foil layer. This two layter can protect the cable from the environmental interference. The 1/4" connector is gold plated design, it can reduce signal distortion.

Ihurllu Balanced 1/4 TRS to XLR Cable 10Feet, 4Pack Include 2Pack XLR Male and 2Pack XLR Female Cable

Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors

Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems

Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound

Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors

Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems

Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound

Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors

Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems

Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound

Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors

Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems

Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound

Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors

Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems

Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound

Pro-grade microphone cord is designed for microphones or other professional recording, mixing, and lighting equipment with the 3 pin XLR connectors

Convenient and cost-effective 2-pack microphone wire provides spare or replacement XLR cable (XLR male to female cable) to use on a set of microphones or on different systems

Balanced Mic cable XLR with soft PVC jacket is constructed with oxygen-free copper (OFC) conductors for delivering pristine sound

Durable: Built to last, our electric guitar cord is made with high-quality oxygen-free copper

Flexible: Our supple guitar chord is designed to coil neatly, preventing twists and tangles

Premium Quality: Designed with the finest materials, our electric guitar cable features 1/4" tips

FOR LIVE SOUND & RECORDING: XLR male to female microphone cable for studio recording and live sound

3 PIN CONNECTORS: Zinc alloy 3-pin connectors with nickeling

DURABLE & FLEXIBLE: Protective metal housing and flexible 6.0mm PVC jacket

FOR LIVE SOUND & RECORDING: XLR male to female microphone cable for studio recording and live sound

3 PIN CONNECTORS: Zinc alloy 3-pin connectors with nickeling

DURABLE & FLEXIBLE: Protective metal housing and flexible 6.0mm PVC jacket

[Low Noise High Fidelity] New bee guitar cord with 22AWG oxygen-free-copper center conductors provides enhanced signal transfer, the PVC insulation material and the high-density stranded copper double shield provide noise rejection for quiet operation

[Ideal for Choice] New bee 1/4 straight and right angle metal connectors, ensures a secure connection in any instrument, pedal, or amp jack. L shape great fro on stage guitar stands.

[Wide Compatible] Suitable for mixer, power amplifier, microphone, effector, decoder, equalizer, electoronic organ, electric guitar, electric bass and other electronic equipments. Widely used in the installation of smart home, karaoke speaker, professional stage audio, etc.

Easily maneuver cables to fit your pedals exactly where you want them with our flat-cable design

99.95% oxygen-free copper to resist corrosion

Low profile metal connectors and built-in strain relief provide sleek yet durable construction

FOR LIVE SOUND & RECORDING: XLR male to female microphone cable for studio recording and live sound

3 PIN CONNECTORS: Zinc alloy 3-pin connectors with nickeling

DURABLE & FLEXIBLE: Protective metal housing and flexible 6.0mm PVC jacket

FOR LIVE SOUND & RECORDING: XLR male to female microphone cable for studio recording and live sound

3 PIN CONNECTORS: Zinc alloy 3-pin connectors with nickeling

DURABLE & FLEXIBLE: Protective metal housing and flexible 6.0mm PVC jacket

This bundle includes Ring Stick Up Cam Plug-In and Pan-Tilt Mount.

Get a more complete look around your home with this easy-to-install mount that lets your Stick Up Cam Plug-In pan and tilt.

Pan-Tilt Mount upgrades a Stick Up Cam Plug-In from a stationary 130° field of view to a 360° pan coverage and 117° tilt coverage for a more complete view of your surroundings.

IN THE BOX: (1) 6 foot USB 3.0 A Male to Micro B cable

FOR USB 3.0 DEVICES: Ideal for connecting USB 3.0 enabled PC peripherals such as hard drives, printers, network hubs and more

FAST SPEED: Enables throughput of up to 4.8Gbps when used with a USB 3.0 host and device

From large recording facilities to small project studios, engineers and artists trust Mogami GOLD STUDIO XLR Microphone Cables for professional results. Engineered to provide an enhanced dynamic range with a pin-drop quiet recording environment, Mogami GOLD STUDIO XLR Microphone Cables help to cure many of the problems encountered in a typical project or home studio.

Mogami GOLD STUDIO XLR Mic Cables are wired with Mogami Neglex Quad High Definition Microphone Cable, a balanced 4-conductor cable with amazingly superior clarity and the highest cancellation of noise and RF interference. Mogami’s quad cable design is renowned for vastly improving the rejection of noise to the tune of a 95% quieter background as compared to even the best 2-conductor microphone cable.

Use Mogami GOLD STUDIO XLR Cables for pro audio sound with nearly any device equipped with an industry-standard XLR 3-pin input or output. Common uses include to and from mixers, preamps, amplifiers, audio interfaces, loudspeakers, powered speakers, studio monitors, and more. Also excellent for use with amplifier, percussion, and vocalist mics as well as vocal effects, processors, and loopers.

From large recording facilities to small project studios, engineers and artists trust Mogami GOLD STUDIO XLR Microphone Cables for professional results. Engineered to provide an enhanced dynamic range with a pin-drop quiet recording environment, Mogami GOLD STUDIO XLR Microphone Cables help to cure many of the problems encountered in a typical project or home studio.

Mogami GOLD STUDIO XLR Mic Cables are wired with Mogami Neglex Quad High Definition Microphone Cable, a balanced 4-conductor cable with amazingly superior clarity and the highest cancellation of noise and RF interference. Mogami’s quad cable design is renowned for vastly improving the rejection of noise to the tune of a 95% quieter background as compared to even the best 2-conductor microphone cable.

Use Mogami GOLD STUDIO XLR Cables for pro audio sound with nearly any device equipped with an industry-standard XLR 3-pin input or output. Common uses include to and from mixers, preamps, amplifiers, audio interfaces, loudspeakers, powered speakers, studio monitors, and more. Also excellent for use with amplifier, percussion, and vocalist mics as well as vocal effects, processors, and loopers.

This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2549 (Black) wire and Neutrik NC3MXX-B Male XLR & NC3FXX-B Female XLR Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you.

The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D.

The brand of connector we used for this custom cable assembly: The NC3MXX-B is the latest and the highest-end Male XLR offering by Neutrik AG-Liechtenstein, the world's leading brand for professional audio connectors. XX series offers greater reliability, improves contact integrity and reduces cable strain, comes in a Black metal housing and features Gold plated contacts.

This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2534 wire and Neutrik NC3MXX-B Male & NC3FXX-B Female XLR Connectors. We at WBC always make world-class custom-built cable assemblies using many of the leading cable and connector brands, if you are unable to find the length and type of cable you are looking for, please feel free to contact us, we will strive to assemble the required cable for you.

The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios and leading sound engineers around the world. All Mogami cables are made in Nagano - Japan using the best materials and technological expertise of decades of R&D.

The brand of connector we used for this custom cable assembly: The NC3MXX-B is the latest and the highest-end Male XLR offering by Neutrik AG-Liechtenstein, the world's leading brand for professional audio connectors. XX series offers greater reliability, improves contact integrity and reduces cable strain, comes in a Black metal housing and features Gold plated contacts.

99.99% oxygen-free copper to resist corrosion

Dual shielding and dual conductors provide durability and reliably clear tone

Flexible, tangle resistant construction

High-precision, Cat 6, ANSI/TIA-568-C.2 compliant, ETL Verified, Ethernet LAN patch cable, pre-terminated with RJ45 connectors and available in a wide variety of colors for proper color coding

Premium quality, long-lasting materials, durable design, and a Lifetime Warranty for the price of a generic cable. ETL Verified to ensure maximum reliability and compatibility

UTP 24AWG stranded conductors for flexibility, twisted in pairs and nested in a spline to minimize crosstalk, 50 micron gold-plated contacts for high-speed data transfer and corrosion resistance

Guaranteed for Life

Three-pin XLR connectors

Professional OFC Noiseless Instrument Cable

Rated input: 100 - 240 VAC, 50-60 Hz, 250 mA maximum

Rated output: 15 VDC, 600 mA

Leakage current: less than 30 μA

➤ 【FLAWLESS & DURABLE】 - This professional 3 pins XLR male to 1/4" TRS audio cable with traditional large size of 3 pin zinc alloy XLR connector female to black metal TRS（big male pin plated with 24K gold). Robust big size connectors, not afraid of any ends separating.

➤ 【HIGH GRADE TRANSMISSION】 - Balanced Lo-Z wire, assures the transmission in a smooth quality way.

➤ 【NOISELESS】 - Dual Insulated shielded insulated copper conductor (Oxygen Free Copper), extra large quantities of braided copper inside, resist the interference EMI or RF from outside.

Audio Adapter for PS5 & PS4 Pro: capture party chat and gameplay audio

Easy Setup: plugs directly into your controller

Extra-Long: sit back and move freely while you play

➤ 【FLAWLESS & DURABLE】 - This professional 3 pins XLR male to 1/4" TRS audio cable with traditional large size of 3 pin zinc alloy XLR connector female to black metal TRS（big male pin plated with 24K gold). Robust big size connectors, not afraid of any ends separating.

➤ 【HIGH GRADE TRANSMISSION】 - Balanced Lo-Z wire, assures the transmission in a smooth quality way.

➤ 【NOISELESS】 - Dual Insulated shielded insulated copper conductor (Oxygen Free Copper), extra large quantities of braided copper inside, resist the interference EMI or RF from outside.

Note : If the size of the earbud tips does not match the size of your ear canals or the headset is not worn properly in your ears, you may not obtain the correct sound qualities or call performance. Change the earbud tips to ones that fit more snugly in your ear

STRIKING FULL-RANGE SOUND from a single, vented balanced armature driver; Hear music the way it was meant to be heard;

SLEEK, LOW-PROFILE SHAPE designed for long-wearing comfort from the smallest earphone in the AONIC line;