Best Infiniter in 2026

Economical Red Line Laser, ideal for a 3D-scanner at short distance and any barcode reader. Line-width optimize at the distance of 1 meter: 1.2mm. Emitting angle: > 60°. 2.6~5 VDC operation. Dimensions: D9 x 26 mm. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, base for plugging, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself.

Wave length: 645~665 nm. Laser power output: Class I – less than 0.39mW. (Update 04/13/2021- According to the latest IEC 60825-1 regulations, the output is measured by 7mm aperature stop at the position of 10cm. Therefore, its Class is changed from "Class II" to "Class I" now, but the brightness is exactly the same as before.)

Red Line laser. Although it is an economical solution for laser line generator applications, this module adopts industrial-grade high-performance design, which means that it can work 24 hours a day, 7 days a week (, different from other cheap laser modules on the market). Mean time to failure (MTTF) at 77°F: 10,000 hours

Wave length: 650nm. 2.6~5 VDC operation. Dimensions: D9 x 26 mm. Laser power output : LPT - Class I - less than 0.39mW. (Update 06/7/2021- According to the latest IEC 60825-1 regulations, the output is measured by 7mm aperature stop at the position of 10cm. Therefore, its Class is changed from "Class II" to "Class I" now, but the brightness is exactly the same as before.) Emitting Angle : >60°

Cross Red Laser Line Generator. Economical solution for laser Cross-Line generator applications. Please notice: laser modules are not supposed to be sold with any power source, power supply, base for plugging, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself.

This module has integrated wavy lens, collimating lens, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power.

High accuracy Red Straight Line Laser, for Industrial high-precision leveling, alignment, adjusting, positioning, measuring and targeting device.

Wave length: 650nm. Output power (Center) : Class II – less than 1mW. Continuous wave output power (Total): 12mW. 2.6~5 VDC operation. Dimensions: D12.5 x 30 mm.

Red Line laser. The best line-accuracy and the widest emitting angle line laser module for use with high-precision devices.

Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device.

Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. E.S.D. protection 15KV. Dimensions: D6.55 x 21.1 mm.

Red laser. Economical solution for general laser pointer application. Notice: Laser modules are NOT laser pens. Laser modules are NOT supposed to be used for commercial use like normal laser pointers.

Green Cross-Line Laser, for Industrial leveling, alignment, adjusting, positioning, measuring and targeting device.

Wave length: 532nm. Emitting angle: >60°. Output power (Center) : Class II – less than 1mW. 2.7~3.3 VDC operation. Dimensions: D13 x 66 mm.

Green Cross-Line Laser. Miniature highlight Green Cross-Line laser module for industrial application.

High accuracy Red Straight Line Laser, for Industrial high-precision leveling, alignment, adjusting, positioning, measuring and targeting device.

Wave length: 635nm. Laser power output : Class I – less than 0.39mW. (Update 03/19/2021 - The laser output (the brightness) is exactly the same as before. The reason why the Laser Class is changed now is that, according to the latest IEC 60825-1 regulations, the output is measured by 7mm aperature stop at the position of 10cm. Therefore, you see that its Class is changed from "Class II" to "Class I" now, even though the brightness is exactly the same as before.)

Red Line laser. The best line-accuracy and the widest emitting angle line laser module for use with high-precision devices. 2.6~5 VDC operation. Dimensions: D12.5 x 30 mm.

Professional Red Straight Line Laser, ultra-precision grade for professional leveling, alignment, adjusting, positioning, measuring and targeting device.

Wave length: 650 nm. Laser line accuracy: 20" (+/- 1mm @10m). Emitting angle:> 120°. Output power (Center) : Class II – less than 1mW. 2.6~5 VDC operation. Dimensions: (W)14 x (H)14 x (L)26 mm

Professional Red Line Laser.The supreme line-accuracy and the widest emitting angle line Laser module for use with Professional applications. ersatile mechanical structure on 4 sides, easy to fixed.

Material: Copper and plastic.

Package:40Pcs, 5V 5mW And 3V 5mW Each of 20Pcs

Laser Shape: Dot, Outer diameter: 6mm. Wavelength: 650nm. Operating voltage: 5V and 3V. Operating Current: less than 20 mA

5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head

Wave length: 650nm

Wide range of wroking temperature: -10°C to +40°C

✔️Material: copper plastic.

✔️Wide working temperature range: -10°C to +40°C.

✔️Laser shape: Dot. Outer diameter: 6 mm. Wavelength: 650nm. Operating voltage: 5V. Total length: 9cm/3.54inch. Operating current: Must be less than 20Ma.

5mw Red Laser Line

Red Laser Line Module 650nm

Diode Laser

Economical Red Line Laser, ideal for a 3D-scanner at short distance and any barcode reader. Line-width optimize at the distance of 1 meter: 1.2mm. Emitting angle: > 60°. 2.6~5 VDC operation. Dimensions: D9 x 26 mm. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, base for plugging, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself.

Wave length: 645~665 nm. Laser power output: Class I – less than 0.39mW. (Update 04/13/2021- According to the latest IEC 60825-1 regulations, the output is measured by 7mm aperature stop at the position of 10cm. Therefore, its Class is changed from "Class II" to "Class I" now, but the brightness is exactly the same as before.)

Red Line laser. Although it is an economical solution for laser line generator applications, this module adopts industrial-grade high-performance design, which means that it can work 24 hours a day, 7 days a week (, different from other cheap laser modules on the market). Mean time to failure (MTTF) at 77°F: 10,000 hours

Wave length: 650nm. 2.6~5 VDC operation. Dimensions: D9 x 26 mm. Laser power output : LPT - Class I - less than 0.39mW. (Update 06/7/2021- According to the latest IEC 60825-1 regulations, the output is measured by 7mm aperature stop at the position of 10cm. Therefore, its Class is changed from "Class II" to "Class I" now, but the brightness is exactly the same as before.) Emitting Angle : >60°

Cross Red Laser Line Generator. Economical solution for laser Cross-Line generator applications. Please notice: laser modules are not supposed to be sold with any power source, power supply, base for plugging, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself.

This module has integrated wavy lens, collimating lens, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power.

Attention: Better not use this for Children class, any laser products is very dangerous for eyes and any exposure to the eyes can cause irreversible damages.

Outer diameter: 6 mm, Wavelength: 650nm

Working Voltage: 5v

[Wide Application]: Level instrument, ground instrument, electric toys, long distance laser wireless communication, stage light, flashlight, laser gyro, laser pointer, electric toy, industrial use. etc

[Wroking Temperature]: -25℃ to 65 ℃; Spot angle: ± 5°

[Wire connection]: Red wire connect to Positive, Black wire connect to Negative

Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself.

Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm.

Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers.

100mW Module: This is a 100mW module that can emit a 405nm blue-violet .

Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable.

High Reliability Material: This dot diode module is made of durable copper shell for long life.

It's suitable for Ø6mm to Ø12.5mm laser module

The clamp specially made for fixing laser modules

It can be flexibly adjusted (Please refer to the product pictures)

12V TTL 200mW To 2W 445nm 450nm Laser Diode LD Power Supply Driver Board

Input Voltage: DC 8-14V Max. Output Voltage: DC 12V (adjustable) Max

For Red, Green and Blue Laser Drive Power

Output Power：100mw

Wavelength： 650nm

Working Voltage：3v-5.5V

400-700nm

AixiZ G-2 G2 lens

Highest efficiency available

Wavelength:405nm，Output Power:20mw

Working Voltage:3V-5.5V，Working Current <180mA

Laser Shape: DOT

Class IIIR laser product, 5mW power output

Compatible with farhop 12mm Laser Mount (Not Included, available on Amazon)

650nm 5mw Red Dot Lazer Diode 10mw Lazer Module

Brass Cap and Black Copper Tube

Adjustable Foucs Dot based on your Working distance

ORANGE HEATSINK, focusable, can cut max 3mm plywood in a very slow speed and 3-4 passes, can cut 0.1-0.2MM copper wires and stainless steel wires

Output: 4W, Wavelength: 450nm, PWM: 0-5V , <18Khz.

Please pay attention when connecting wires : RED wire=12V+ , BLACK wire=GND -, Yellow Wire= PWM,PWM: 0-5V <18khz

√Photo Light Sensitive Resistor: Maximum voltage: 150 Volt DC; Spectral peak: 540 nm; Maximum wattage: 100 mw; Light resistance (10 Lux): 50-100 Kohm; Operating temperature: - 30 ~ + 70 degree Celsius.

√Enough quantity: We have 6mm 5V 5mW And 3V 5mW mini laser diode and each value 10pcs and LDR sensor 5 mm GM5539 5539 20pcs. Enough quantity and adequate specification come in handy for your DIY and hand working projects.

√Coated with epoxy, our LDR resistors feature good reliability, small volume, high sensitivity, quick response and good spectrum characteristic. Our resistors and mini laser diode are manufactured with string quality standard, they are of good quality.

★Material :Metal; Laser Shape: Dot

★Output Power:5mw；Wavelength: 650nm

★Working Voltage: 3.0-5V

Output Power: 1mw

Wavelength: 532nm

Working Voltage: 3V DC

Output power: 1mw

Wavelength: 980nm

Operation Voltage: DC=3-5VDC