Best Inline Fabrication in 2026

[DEDICATED PRESS MOUNT] This mount is for the Hornady Lock-N-Load AP press and will only work with that specific press. We have dozens of dedicated mounts that are purpose built for specific presses. Please find the one for your specific press.

[4” Lift Up] Lifts your press up 4" above the work surface and gets the shellplate closer to eye level. Dimensions 9-1/8” wide, 9” deep footprint and 4” tall

[SOLID STEEL] Constructed from solid 3/16" plate steel, the Ultramount is super solid. Will not bend or flex while reloading and spreads the pressure load out to a much larger footprint on your reloading table or bench

[DEDICATED] InLine Fabrication Standard Universal LED Shellplate Lighting System, 110v

[COMFORT] Puts the right amount of bright white light right where you need it, inside the cage of your reloading press! Aids in seeing all aspects of reloading including powder levels and moving parts.

[HIGH INTENSITY] Average 75,000-hour bulb life span for long lasting, Ultrabright LED lights

[DEDICATED PRESS MOUNT] This mount is for The Dillon RL 550 B & C Press and will only work with that specific press. We have dozens of dedicated mounts that are purpose built for specific presses. Please find the one for your specific press.

[9-3/4” Lift Up] Lifts your press up 9-3/4" above the work surface and gets the shellplate closer to eye level. 12-1/8” wide, 11-1/2” deep footprint and 9-3/4” tall

[SOLID STEEL] Constructed from solid 3/16" plate steel, the Ultramount is super solid. Will not bend or flex while reloading and spreads the pressure load out to a much larger footprint on your reloading table or bench

[DEDICATED PRESS MOUNT] This mount is for The Redding T-7 Turret Press and will only work with that specific press. We have dozens of dedicated mounts that are purpose built for specific presses. Please find the one for your specific press.

[4” Lift Up] Lifts your press up 4" above the work surface and gets the shellplate closer to eye level. Dimensions 9-1/8” wide, 9” deep footprint and 4” tall

[SOLID STEEL] Constructed from solid 3/16" plate steel, the Ultramount is super solid. Will not bend or flex while reloading and spreads the pressure load out to a much larger footprint on your reloading table or bench

[DEDICATED PRESS MOUNT] This mount is for the Redding Big Boss II press and will only work with that specific press. We have dozens of dedicated mounts that are purpose built for specific presses. Please find the one for your specific press.

[9-3/4” Lift Up] Lifts your press up 9-3/4" above the work surface and gets the shellplate closer to eye level. 12-1/8” wide, 11-1/2” deep footprint and 9-3/4” tall

[SOLID STEEL] Constructed from solid 3/16" plate steel, the Ultramount is super solid. Will not bend or flex while reloading and spreads the pressure load out to a much larger footprint on your reloading table or bench

Includes improved shell plate

Works with Hornady's Lock N Load AP and Pro-Jector presses

Smooth radius at the mouth ensures proper functioning

Includes improved shell plate

Works with Hornady's Lock N Load AP and Pro-Jector presses

Smooth radius at the mouth ensures proper functioning

Includes improved shell plate

Works with Hornady's Lock N Load AP and Pro-Jector presses

Smooth radius at the mouth ensures proper functioning

Includes improved shell plate

Works with Hornady's Lock N Load AP and Pro-Jector presses

Smooth radius at the mouth ensures proper functioning

[DEDICATED PRESS MOUNT] This mount is for the Hornady Lock-N-Load AP press and will only work with that specific press. We have dozens of dedicated mounts that are purpose built for specific presses. Please find the one for your specific press.

[4” Lift Up] Lifts your press up 4" above the work surface and gets the shellplate closer to eye level. Dimensions 9-1/8” wide, 9” deep footprint and 4” tall

[SOLID STEEL] Constructed from solid 3/16" plate steel, the Ultramount is super solid. Will not bend or flex while reloading and spreads the pressure load out to a much larger footprint on your reloading table or bench

Used by serious shooters and reloaders

Tools and accessories for any shooter

Innovative and easy to use

Hornady Reloading Equipment - constructed of carbon steel, this Hornady Lock n Load Cartridge Gauge, 300 Win Mag case gauge (.308) (380718) is a very handy tool that allows the user to quickly check their cases and ammo to ensure a correct fit in SAAMI chambers. Available in a variety of calibers

Easy to Use - simply insert the cartridge into the gauge and seeing if the head of the case is flush with the back of the gauge. One end of the Hornady gauge has a slight groove to help give you an idea of the max and min headspace

Used By Reloaders & Handloaders - it’s a quick test for checking headspace, length based on the shoulder, and prevent oversizing/undersizing brass. These gauges are also extremely useful for checking the size of the case on loaded/unloaded ammunition

Hornady Comparator Kit – The Hornady Lock-N-Load Bullet Comparator is perfect for the reloader looking to measure seating depth of loaded ammunition quickly and precisely. Measures from the bullet ogive to the base of the loaded round, to eliminate variation in seating depth. This basic set includes 7 bullet inserts

Why Do You Need a Hornady Bullet Comparator – Measuring cartridge lengths across the bullet tips is not a reliable (or repeatable) method for measuring loaded rounds. It’s common for variations of up to .025” to exist from one round to the next

Reliable Rounds – Our Bullet Comparator measures rounds from the ogive to provide consistent, precise measurements. You can also use it to check uniformity of bullets from base to ogive

Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Custom Grade New Dimension 2-Die Set for 223 Remington (.224) (546228) is necessary for each cartridge that you reload to decap, de-prime, resize, and seat/crimp the bullet

Find the Custom Grade Dies You Need - these precision dies give the handloader more control over the loading process. Depending on the caliber of die set/alignment sleeve you are using, the Hornady Crimp/Seater Die will either "taper" or "roll" crimp your cases

Full Length Sizer Die - features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage and makes tightening the spindle lock a breeze when making adjustments

Hornady Reloading Equipment - constructed of carbon steel, this Hornady Lock n Load Cartridge Gauge 45 Auto (.451) (380706) is a very handy tool that allows the user to quickly check their cases and ammo to ensure a correct fit in SAAMI chambers. Available in a variety of calibers

Easy to Use - simply insert the cartridge into the gauge and seeing if the head of the case is flush with the back of the gauge. One end of the Hornady gauge has a slight groove to help give you an idea of the max and min headspace

Used By Reloaders & Handloaders - it’s a quick test for checking headspace, length based on the shoulder, and prevent oversizing/undersizing brass. These gauges are also extremely useful for checking the size of the case on loaded/unloaded ammunition

ESSENTIAL GUNSMITHING TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and STANDARD PUNCHES Set paired up with innovative Smart Bench Block

GUNSMITHING HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon; grip confidently thanks to ergonomic, rubberized handle – all to allow for maximum control and precision while tapping pi

STANDARD, FLAT TIP PIN PUNCHES FOR ANY GUN: hardened steel, nickel plated flat tip punches for driving out solid pins

ACCURACY: Each level has an integrated bubble level for precise measurement and the Reference Level has a magnetic bottom for added stability

VERSATILITY: Adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns

DURABLE: Precision machined aluminum with an anodized finish

Made from solid block of 6061 T6 aircraft grade aluminum

Machined to minimum SAAMI specs

204 Ruger, 22 Hornet, 223 Rem, 22-250, 300 AAC Blackout and 7.62x39mm

Hornady Custom Grade New Dimension 2-Die Set, 308 WIN (.308) (546358) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die, Sure-Loc Rings, & Storage Box

Find the Custom Grade Dies You Need - these precision dies give the handloader more control over the loading process. Depending on the caliber of die set/alignment sleeve you are using, the Hornady Crimp/Seater Die will either "taper" or "roll" crimp your cases

Full Length Sizer Die - features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage and makes tightening the spindle lock a breeze when making adjustments

Hornady Reloading Equipment - constructed of carbon steel, this Hornady Lock n Load Cartridge Gauge, 243 Winchester case gauge (.243) (380709) is a very handy tool that allows the user to quickly check their cases and ammo to ensure a correct fit in SAAMI chambers. Available in a variety of calibers

Easy to Use - simply insert the cartridge into the gauge and seeing if the head of the case is flush with the back of the gauge. One end of the Hornady gauge has a slight groove to help give you an idea of the max and min headspace

Used By Reloaders & Handloaders - it’s a quick test for checking headspace, length based on the shoulder, and prevent oversizing/undersizing brass. These gauges are also extremely useful for checking the size of the case on loaded/unloaded ammunition

Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Custom Grade New Dimension 2-Die Set for 243 Winchester (.243) (546244) is necessary for each cartridge that you reload to decap, de-prime, resize, and seat/crimp the bullet

Find the Custom Grade Dies You Need - these precision dies give the handloader more control over the loading process. Depending on the caliber of die set/alignment sleeve you are using, the Hornady Crimp/Seater Die will either "taper" or "roll" crimp your cases

Full Length Sizer Die - features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage and makes tightening the spindle lock a breeze when making adjustments

MUST HAVE: Glock accessories gunsmith tool kit that features 2 essential tools for maintenance and customization.

EASY GUN DISASSEMBLY: 3mm punch makes a pin removal tool that fits all Glock pin sizes. Easily removes pins to disassemble your gun to clean, modify, or maintain.

FRONT SIGHT TOOL: Magnetic 3/16' hex hut driver fits Glock front sights. Ideal for changing standard sights, installing night sights or dedicated height sights.

Hornady Lock-N-Load Die Bushings – The Lock-N-Load bushing system will forever change the way you switch from one caliber to another. Lock-N-Load technology allows you to change dies and start loading another caliber in a matter of seconds. Includes 2 die bushings

Maximize Reloading Time – Quickly and easily change from one die to another with a simple twist. Item number: 044094

Positive Locking Action – Holds the dies in perfect alignment. Compatible with all Hornady Reloading Presses

Hornady Custom Grade New Dimension 2-Die Set, 300 WIN MAG (.308) (546352) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die, Sure-Loc Rings, & Storage Box

Find the Custom Grade Dies You Need - these precision dies give the handloader more control over the loading process. Depending on the caliber of die set/alignment sleeve you are using, the Hornady Crimp/Seater Die will either "taper" or "roll" crimp your cases

Full Length Sizer Die - features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage and makes tightening the spindle lock a breeze when making adjustments

Product 1: Fits: Glock 42, 43

Product 1: Tritium night sights transition from standard white dot sights during the daylight, to glowing green dots in the the dark

Product 1: Utilizes quality Swiss tritium for maximum brightness and unmatched visibility in all shooting conditions 24/7

EASE OF USE: Trimmer indexes cases on the shoulder for speed and precision

VERSATILE: Adjustable Collet System works with all shouldered cases from .17 Remington to .460 Weatherby

DURABLE: The HSS cutters stay sharp for thousands of rounds to make trimming quick and easy and the heavy-duty motor and drivetrain are optimized for durability and performance

Package length: 17.018 cm

Package width: 8.89 cm

Package height: 5.334 cm

DIMENSIONS: 9.25” H x 23.5” W x 4.25” D

RELIABLE: Two non-marring cleaning forks hold your firearm secure while non-slip rubber feet keep the Tipton Compact Range Vise in place

DURABLE: Constructed from solvent resistant polymer

Everything needed for case prep in one versatile tool

Unique handle design unthreads to store all parts

Tools Included: inside and outside deburring tools, large and small primer pocket cleaners, and large and small primer pocket reamers

EASE OF USE: This Wheeler trigger scale features a digital screen for clear results

CONVENIENT: With an audible indicator tone, you’ll know when the Wheeler Digital Trigger Gauge is done

RELIABLE: Accurate measurements with 1 oz increments