Best Ironstar in 2026

Pliers are made of stainless steel with comfortable handle and reset spring.

The clamps are made of high quality spring steel, which can rebound to the initial state after use. The sharpened tip minimizes wood damage. Electroplating process is used on the surface to make the clip not easy to rust.

Can be used for different angles of mitered corner; Easy operation, just opening and releasing the clamps, which greatly improves the working efficiency.

The product has two pairs, four connectors, two male and two female connectors

Suitable for direct 1/4 Inner diameter hose, suitable for water and air flow

There will be no leakage or air after it is disconnected

Heavy Duty Muslin Clamps 4.5 inch long

2 inch mouth opening maximum

Very strong to fit most stands

(50) 1/8'' Clecos Temporary Fasteners + (1) Cleco Pliers + (1) Carry Bag

These Cleco Fasteners Are Made In The USA

Ideal For Use In Automotive Body Work And Repair

New Spring Loaded Pliers and 13 spring miter clamps included - LIFETIME GUARANTEE

Miter clamps spread from 0 to approximately 2 inches. No need to carry a bunch of different sizes

Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut

Pliers and 13 spring miter clamps included -LIFETIME GUARANTEE

Miter clamps spread from 0 to approximately 2 inches. No need to carry a bunch of different sizes

Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut

articulated clamping jaws for optimal adaptation to the workpiece

V-grooves at right angles for gripping round workpieces

Clamping width: 60 mm; Clamping pressure 1,2 kg

When you making picture frames,moldings,wood trim work,and any compound miter,the biggest trouble in gluing up mitered corners is keeping them from opening up.Now, it is time to give up those cumbersome and expensive parallel clamps. The professional Feiyang Miter Spring Clamps provides you with the ideal and cost effective mitered corners clamping tool to help you get your project get done in a more efficient manner.

You can use the miter spring pliers to easily open the sharp tip, just place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood to hold the parts together. It can be done in just a few seconds.Then,let the glue dry or brad nails the corner joints together.

Unlike other available spring clamps, the uniquely designed tip is designed to pierce the wood,so that there is minimal visible evidence of the clamps being used after you remove them. This prevents the clamp clip from cutting, pushing, or tearing on the wood, thereby Leaves appearance flaws that are difficult to repair. Although they will leave small impressions in the wood, but they can be filled or sanded out in finishing.

【What You Get】: (6) x 4.5 inches long spring clamp. Made of nylon material for added durability.

【High Strength】: With a strength of 10 pounds, our heavy duty spring clamps hold things in place tightly. It’s helpful for your DIY projects like photography, background, carpentry, etc.

【Grip Jaw Pads】: The jaw pad has a strong grip to be held securely in right place. Made of plastic materials, not easy to scratch the surface of the object.

✔ 1.6" Alligator Clips, Carbon Steel Nickel Plated, Silver Tone

✔ Overall Size(Single) : 40 mm x 5.8 mm x 8.6 mm / 1.6" x 0.23" x 0.34"(L*W*H)

✔ Net Weight :162g/100Pcs, 1.62g/1Pcs

Tough polymer construction will last for years

Includes 20 mini clamps

Perfect for smaller spaces

Package Dimensions: 2.794 cms (L) x 13.462 cms (W) x 24.892 cms (H)

Product Type: Hardware Clamp Vise

Package Quantity: 1

6"-length clamps with extra-wide 2.5" jaw-opening

Heavy Duty

Firm grip

Heavy-duty 6-inch long clamp has an actual maximum opening of 2.5 inches.

Thick spring material can ensure the product is durable.

Spring clip is made of nickel-plated steel, durable and anti-rust.

6"-length clamps with extra-wide 2.5" jaw-opening

Heavy Duty

Firm grip

INCLUDES 10 New Spring Clips (Bulk Packed)

Spring Loaded for Extra Grip. Each Clip Measures 2.5" Long X 1" Wide and opens approximately 1.25" to fit all sorts of items

Spring Grip Organizer for Brooms, Mops, Rakes Etc

6"-length clamps with extra-wide Heavy Duty

2.5" jaw-opening

Firm grip PVC coated tips and handles

【Powerful & Long-Lasting Clamping Force】 - 7 Inch spring clamps with tempered steel coil spring with larger diameter and more loops provides clamping force up to 30 lbs, holding objects strongly by generating a large amount of clamping force. And the clamping force of the clamps for woodworking lasts up to 72 hour, perfect for wood gluing and securing

【Extra-Wide Jaw Opening】 - the wood clamps for woodworking comes with 4 piece and to meet DIYers and professional needs, large spring clamps for crafts have maximum jaw opening up to 3 inch perfect for thicker materials and wood chip

【Comfortable & Ergonomic Design】 - heavy duty nylon spring clamps for backdrop stand made of reinforced fiberglass with great finish and comfortable to grip because of double layer TPR handle with ergonomic design

6" length clamps with extra-wide 2.5" jaw-opening

Heavy Duty

Firm grip

6"-length clamps with extra-wide Heavy Duty

2.5" jaw-opening

Firm grip PVC coated tips and handles

Includes 4 Spring Clips (New but Bulk Packed)

Spring Loaded for Extra Grip

Spring Grip Organizer for Brooms, Mops, Rakes Etc

【Powerful & Long-Lasting Clamping Force】 - 10 Inch spring clamps with tempered steel coil spring with larger diameter and more loops provides clamping force up to 37 lbs, holding objects strongly by generating a large amount of clamping force. And the clamping force of the clamps for woodworking lasts up to 72 hour, perfect for wood gluing and securing

【Extra-Wide Jaw Opening】 - the wood clamps for woodworking comes with 2 piece and to meet DIYers and professional needs, large spring clamps for crafts have maximum jaw opening up to 3.5 inch perfect for thicker materials and wood chip

【Comfortable & Ergonomic Design】 - heavy duty nylon spring clamps for backdrop stand made of reinforced fiberglass with great finish and comfortable to grip because of double layer TPR handle with ergonomic design

Reinforced nylon constructions for tight, study and long-lasting hold.

Durable pads(clamping chips) protect the finish.

Ergonomic handle for comfortable grip.

They are versatile and suitable for home, automotive use, perfect used for a DIY soldering helping hands device, Alligator clips can be used as miniature clamps to hold parts together.

In order to reduce environmental pollution, we only use mini paper box instead of plastic box to pack it.

Package Included: 25Pcs

Product Name : Alligator Clip;

Material : Metal ;Color : Silver Tone;

Size : 51 x 10 x 5mm / 2" x 0.4" x 0.2"

PACKAGE INCLUDES: Set of 40 metal wire alligator clamp. The total length of the clip is 15cm. Adequate enough to meet your different craft uses and share with DIY enthusiasts.

ALLIGATOR CLIPS DESIGN: The total length of the clip is 15cm, the length of the clip is 3cm, and the length of the wire is 12cm. This product has no base and can be inserted into foam, clay or sand.

HIGH-QUALITY: It is made of stainless steel. Rust and corrosion-resistant, durable. The jaws of the photo clip holders have a perfect solid bite. They clamp tightly and do not deform in long-term use.

Heavy Duty Clamps: This 16-piece spring clamps set is made of reinforced nylon, heavy duty spring and screws for tight, sturdy and long-lasting hold.

Various Size and Clamp Force: Comes with 6 PC 3-3/8" clamps, 6 PC 4-1/2" clamps, 4 PC 6-1/2" clamps. Three jaw open sizes (2-1/4", 1-3/4", 1-3/8" ) for versatile use, provide suitable clamp force to different objects.

Flexible Pads: The pads in the heads of clamps are designed to be soft and flexible to protect finishes and provide maximum flexibility and tension.

6" length clamps with extra-wide 2.5" jaw-opening

Heavy Duty

Firm grip

Lot of 8-pack 4-inch Full Size*1-inch Jaw Open Size, and 2-pack 6-inch Full Size*2-inch Jaw Open Size Spring Metal Clamps

Nickel-plated Steel Jaws for Longer Tool Life

Heavy duty tempered steel springs for fast, reliable opening and closing

✔ 2.0" Alligator Clips, Carbon Steel Nickel Plated, Silver Tone

✔ Overall Size(Each) : 51mm x 10mm x 5mm / 2.0" x 0.4" x 0.2"(L*W*T)

✔ Max Jaw Open Width : 9mm/0.35inch