Best Jake Sales in 2026

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1"

Metal Screws are painted to closely match many brands of metal roofing though color may vary

Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc)

ONLY fits Gate Frame measuring 1-3/8" - and Fence Post of 1-3/8" - See Graphics

See Instructions for Proper Installation Procedures and Requirements - Included on This Page

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1-1/2" Under Head

Metal Screws are painted to closely match many brands of metal roofing though color may vary

Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc)

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 1-1/2" Under Head

Metal Screws are painted to closely match many brands of metal roofing though color may vary

Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc)

Dimensions: Height .625" - Head Width .625" - Shaft .265" - Length 4" - Use with T30 Torx Bit

Bronzed Coated Exterior - Prevents Rust and Corrosion - ACQ Lumber Compatible

Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling

Refer to Installation Instructions and Measuring Chain Link Pipe - See Graphics

Occasional Lubrication of Wheel Bearing with Spray Lube is Recommended

Gate Helper Wheel Frame is Galvanized Steel to Prevent Red Rust; Gate Wheel is Well Constructed

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head

Metal Screws are painted to closely match many brands of metal roofing though color may vary

Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc

Dimensions: Head Height/Width .469 - Diameter .24" - Length 2" - Use 5/16" Hex Head Bit

These screws are a far superior alternative to spikes for greater holding power.<br/>

Manufactured from high quality heat treated steel and are ACQ treated lumber compatible<br/>

High Performance Exterior Coated Torx/Star Drive Wood Screws (1 pound (Approx. 32 screws))

Self-Countersinking Nibs & Drag Reducing Knurled Shoulder for a Cleaner & Easier Installation

Quality Wood Screws. ACQ Compatible with Treated Lumber, Outstanding Abrasion Resistant.

ONLY fits 1-3/8" Gate Frames - Will Not Fit Other Sizes - See Graphics

Minimum REQUIRED Distance Between Gates is 2 Inches - Adjustable to Maximum 4" Gap

Measure before you buy

Dimensions: 1/4" Hex Head - 1/2" EPDM Washer - Shaft .19" - Width .5" - Measures 2" Under Head

Metal Screws are painted to closely match many brands of metal roofing though color may vary

Colored roof screws head are painted with a two part polyurethane for longer product life (Not Zinc

Dimensions: .164" Shank Size - 0.32" Width and Height - Use T20 Torx/Star Bit

Triple Ceramic Coating, ACQ Treated Lumber Compatible, Abrasion Resistant

ONLY Fits Gate Frame Measuring 1-5/8" - Latches to a 2-3/8" Gate Post - No Other Sizes

All measurements are the "outside diameters" of gate frames and fence posts

Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5"

J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges

6" Gate Hinge is made of galvanized steel to prevent rust and corrosion

Only fits 1-5/8" Gate Frame - Will NOT fit other sizes - See graphics

Installation and properly measuring Fence Pipe instructions included on this page

Mounting Screws Not Included

High Quality T15 (T-15) Torx/Star Drive Bit 3-1/2" Long. Torx Bit Size Engraved on Bit 5 PACK

Bit is Made of High Quality Tool Grade S2 Industrial Steel for Long Torx/Star Driver Bit Life.

Torx/Star Drive Bit Set is Impact Rated. Quickly Drive Torx/Star Head Screws with T15 Heads.

Screw Measures 4-1/2" long with 5/8" Pin - Height of Pin 1.46" - Diameter .65" - Width .94"

Drop Rod, Cane Bolt, Drop Pin for Chain Link Fence Single or Double Chain Link 1-3/8 Gate Frames

Cane Bolt AKA Chain Link Gate Drop Pin or Drop Rod. This Gate Rod is 1/2" in Diameter ~32" Long

Galvanized. Secures Your Chain Link Gate Firmly as it Utilizes a Center Stop in the Ground

ONLY fits 1-3/8" Chain Link Gate Frame. Will Not Fit Other Sizes - See Graphics

Installation instuctions and how to measure Chain Link Gate Frame included on this page

Product is made from galvanized steel to prevent rust and corrosion

Dimensions - 8" length (5.75" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5"

J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges

8" Gate Hinge is made of galvanized steel to prevent rust and corrosion

Easily Replace Your Pool Gate Latch Vinyl Gate Latch, and Wood Fence Gate Latch

Save Time and Money and Maximize Your Gate Security

Secures Gate the Right Way the Last Time

Typically Used To Latch Two Gates Where Access is From Outside Only (Dumpster) No Internal Latch

Needs a Mounting Surface of ~4 Inches and a Minimum Distance Between Gates of ~7/8"

Adjustable. Distance Between Gates Can Be From 7/8" to 2-3/8"

ONLY fits chain link fence gate frames from 1-7/8" - See Instructions and graphics on this page

Dimensions - Width 1.5" - Length ~4.07" - Thickness ~.188" - Pin diameter 5/8" and Pin Length ~1.39"

Mount against a shop, barn, flat wood fence, shed, square wood post or any flat vertical surface.

The 5/8" pin will let you use in conjunction with a 5/8" Frame Hinge - (sold separately)

You need to measure both gate frames "outside diameter" to ensure product will fit before purchase

Installation instuctions and how to measure chain link fence are included on this page

Also Called: DROP ROD, CANE BOLD, DROP PIN, Chain Link Fence Double Gate Pin/Rod Latch

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1"

#14 Sheet Metal roofing screws are galvanized for corrosion resistance

Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily

You Need to Pre-Measure Top Rail Before Placing Order - This Item Only Fits One Size

ONLY fits where 1-5/8" Outside Diameter Chain Link Fence Top Rail (CQ20 or DQ40)

Installation instructions and How to Measure Chain Link Fencing are Included on This Page

Latch Locks on Both Sides of Gate. This Vinyl Fence Gate Latch is Powder Coated WHITE

Vinyl Gate Hinges/Latches - Adjustable from 3/4" - 1-1/2" Gap Between the Gate Post and Gate Frame.

Gate Hinges/Latch to Install With Simple Easy to Follow Gate Hinge Installation Instructions.

✔ You Need to Measure Gate to Ensure you Purchase Correct Item

✔ Vinyl Gate Hinges are Adjustable from 3/4" - 1-1/2" For The Gap Between the Gate Post and Gate Frame

✔ Each Post Flange is 3-1/2" high by 3-5/8" wide by 1-1/2" deep