Best Jamg He in 2026

Lower shrinkage & High precision, makes prints with more sharp details, specially for the tiniy figure

Easy cleaning, No IPA, No detergent, No cleaning device required

Fasting Printing, 1.5-3S / Layer on LCD mono, 3-8S / Layer on LCD RGB, 1.-6S / Layer on DLP printer, Suitable on most brand 3d printers

【Fast Printing and Curing】Siraya Tech ABS-Like resin has good fluidity, which can effectively increase printing speed, success rate and are easy to clean. And this 3D printing resin has an excellent combination of stiffness and toughness, is not fragile, and is strong enough to take that accidental fall from time to time.

【Low Odor and Easy to Clean】Siraya Tech fast ABS-Like resin produces little order in the 3D printing process and is not unpleasant. And Siraya Tech fast resin is very easy to clean. After you print, you only need an air gun and alcohol spray to rinse it off, avoiding sticky after printing the model.

【Wide Applications】Siraya Tech standard 3D printer resin is highly compatible with most LCD and DLP 3D printers and 8K capable. This fast ABS-Like resin has a wide range of applications, from tabletop models to industrial parts, especially suitable for small and half-length models.

【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.

【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.

Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.

Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details.

【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.

【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.

【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.

【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.

【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.

Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.

Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.

Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details.

EFFICIENT AND STABLE: LCD 3D printer resin has high fluidity and fast curing. After curing, it shows good stability in humid and corrosive environment

MULTI-COLOR: This 405nm 3D resin contains high-quality pigments, which makes the printed works show bright and amazing color effects. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.

HIGH PRECISION: Photosensitive resin has low shrinkage and high precision, 3D resin shrinkage rate of 3.72-4.24%, to ensure the high precision and smooth surface of the model, and perfectly restore the 3D printing works

Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.

Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.

Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details.

①【Suitable for novice, High Compatibility】- SUNLU 3D Printer resin is very easy to operate, suitable for novice who are new to LCD 3D printers. And this SUNLU 3D printing resin is highly compatible with most 2K 4K 6K 8K resin 3D printers (LCD/DLP/SLA).

②【Cost-effective, Good Printing Effect】- When comparing SUNLU Standard Photopolymer Resin 2000g and 1000g, the price will be lower with equal quality. SUNLU 3D Printing fast curing resin will fast cure when it absorbs 405nm UV light from a resin printer.

③【Low Shrinkage & High Precision】- During the development process, engineers worked on ways to reduce volume shrinkage during the curing of the SUNLU Standard Photopolymer Resin in order to improve the accuracy of the 3D resin print results. Providing you with high precision, smooth surface print results.

①【Suitable for novice, High Compatibility】- SUNLU 3D Printer resin is very easy to operate, suitable for novice who are new to LCD 3D printers. And this SUNLU 3D printing resin is highly compatible with most 2K 4K 6K 8K resin 3D printers (LCD/DLP/SLA).

②【Cost-effective, Good Printing Effect】- When comparing SUNLU Standard Photopolymer Resin 2000g and 1000g, the price will be lower with equal quality. SUNLU 3D Printing fast curing resin will fast cure when it absorbs 405nm UV light from a resin printer.

③【Low Shrinkage & High Precision】- During the development process, engineers worked on ways to reduce volume shrinkage during the curing of the SUNLU Standard Photopolymer Resin in order to improve the accuracy of the 3D resin print results. Providing you with high precision, smooth surface print results.

【Safer and Ultralow Odor】 Made from soybean oil, no VOCs, no BPA, no harmful chemicals. Complied with EN 71-3:2013 safety standard.

【Easy to Use & Stunning Colors】 High precision and quick curing for LCD 3d printing and high quality pigments provide stunning colors in our range of resins and available colors. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.

【Fast Curing & Exposure Time】 Optimized curing time for Anycubic Photon, offering better printing quality. Bottom layer exposure: 60-80s; Normal exposure: 8-10s.

High Toughness – Siraya Tech Blu 3d printer resin maintains a good balance between hardness and impact resistance. This clear resin 3d printing is a tough resin that is easy to use and does not break easily when bent. Compared to other resins that are too brittle, it can withstand bending, compression, and occasional accidental drops without breaking easily—ideal for making strong and flexible functional parts.

Wide Applications - Blu tough 3D printer resin is suitable for high-strength and non-fragile functional parts such as brackets, bases, housings, industrial parts, architectural models, and parts that require handling the load without changing the shape and other high-strength functional models. Siraya Tech Blu resin is compatible with most LCP and DLP 3D printers.

Strong and Not Brittle – Siraya Tech Blu clear resin 3d printer is a tough and flexible resin. It is strong and not brittle and will not shatter easily as other resins—ideal for printing high strength and precision fitting engineering and functional parts.

✦Excellent Use Effect: The model printed with ANYCUBIC resin has very pure and amazing color effects, presenting you a more perfect printed model.

✦High-speed Solidification: The resin can ensure the strength of the molded part without excessive shrinkage, shorten the curing time, and ensure the high precision and smoothness of the printed model.

✦Environmental Protection & no peculiar smell: Using soybean oil as raw material, the source is green and environmentally friendly, with ultra-low odor. No VOC, no BPA, no irritating and harmful chemical substances in line with EN 71-3:2013 safety standards.

✦Excellent Use Effect: The model printed with ANYCUBIC resin has very pure and amazing color effects, presenting you a more perfect printed model.

✦High-speed Solidification: The resin can ensure the strength of the molded part without excessive shrinkage, shorten the curing time, and ensure the high precision and smoothness of the printed model.

✦Environmental Protection & no peculiar smell: Using soybean oil as raw material, the source is green and environmentally friendly, with ultra-low odor. No VOC, no BPA, no irritating substances in line with EN 71-3:2013 safety standards.

THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; Dries fast and non tacky so it won't clog your nozzle with goo

LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print

LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water

Easy to Print- Siraya Tech Easy rapid resin is simple to use as it cures quickly and has lower peel force. Most plant-based resin has weak mechanical strength; Easy is stronger and thus able to print on bigger printers. Siraya Tech Easy 3D printer resin is also easy to clean and sand.

Easy on The Environment - Siraya Tech Easy 3D printer resin uses materials from plant-based renewable sources and is more eco-friendly. It reduces the reliance on petroleum while still producing beautiful prints.

Great Resolution - Siraya Tech Easy rapid resin has excellent resolution and unique colors, and the prints show lots of details with smooth surfaces. This makes your models look great while reducing the time needed in postprocessing.

【𝐒𝐮𝐩𝐞𝐫 𝐄𝐚𝐬𝐲 𝐭𝐨 𝐂𝐥𝐞𝐚𝐧】Anycubic Water Washable Resin contains hydrophilic groups with good water solubility, which is can be directly cleaned with water instead of alcohol and greatly save the cost of alcohol use. Besides, it can also be cleaned by Anycubic Wash and Cure Machine or ultrasonic cleaning.

【𝐇𝐢𝐠𝐡 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 𝐚𝐧𝐝 𝐋𝐨𝐰 𝐒𝐡𝐫𝐢𝐧𝐤𝐚𝐠𝐞】Anycubic UV resin prints the models with low shrinkage during the photo curing process, which ensures the high precision and smooth surface. The low shrinkage rate ensures that every model is printed in good details.

【𝐋𝐨𝐰 𝐎𝐝𝐨𝐫 𝐚𝐧𝐝 𝐒𝐚𝐟𝐞】Anycubic water washable photopolymer resin has low odor and it can ensure customers with a better printing experience. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.

①【SUNLU Fast Curing 3D Printer Resin】SUNLU standard photopolymer resin will fast cure when it absorbs 405nm UV light from a resin printer(or resin curing machine), suitable for most 4K/8K resin 3D printers(LCD/DLP/SLA).

②【Low Shrinkage and High Precision】During the resin R&D, SUNLU engineers focus on how to reduce resin volume shrinkage during curing to ensure high precision and good stability.

③【High Compatibility and Easy to Use】SUNLU engineers have tried a variety of print settings on different brands of printers, constantly optimizing the resin performance, making SUNLU resin highly compatible and friendly to beginners.

①【405nm UV Curing Resin】SUNLU standard resin has been developed through many tests by engineers, which can guarantee excellent printing stability, perfect molding effect, high precision with smooth finish of 3D printing results.

②【Low Shrinkage & High Precision】SUNLU team has improved the formulation, focused on reducing volume shrinkage and increasing molding strength, which ensures SUNLU standard resin's high precision and good stability.

③【Fast Curing & Excellent Fluidity】SUNLU 405nm rapid resin has excellent fluidity for fast curing, making the 3D printing models forming faster and the exposure time shorter.

【𝐒𝐮𝐩𝐞𝐫 𝐄𝐚𝐬𝐲 𝐭𝐨 𝐂𝐥𝐞𝐚𝐧】Anycubic Water Washable Resin contains hydrophilic groups with good water solubility, which is can be directly cleaned with water instead of alcohol and greatly save the cost of alcohol use. Besides, it can also be cleaned by Anycubic Wash and Cure Machine or ultrasonic cleaning.

【𝐇𝐢𝐠𝐡 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 𝐚𝐧𝐝 𝐋𝐨𝐰 𝐒𝐡𝐫𝐢𝐧𝐤𝐚𝐠𝐞】Anycubic UV resin prints the models with low shrinkage during the photo curing process, which ensures the high precision and smooth surface. The low shrinkage rate ensures that every model is printed in good details.

【𝐋𝐨𝐰 𝐎𝐝𝐨𝐫 𝐚𝐧𝐝 𝐒𝐚𝐟𝐞】Anycubic water washable photopolymer resin has low odor and it can ensure customers with a better printing experience. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.

【Low Shrinkage & High Precision】JAYO photosensitive resin can show its low shrinkage rate advantage during the curing process. And its resin model can display a high-precision and smooth exterior from its printing details and pattern treatment.

【Fast Curing &Great Stability】JAYO 3D Printer Resin 405nm UV-Curing Resin can reduce the printing time by its excellent fluidity. And its great stability and proper hardness guarantee a fluent printing experience and successful printing models.

【High Compatibility and Easy to Use】Making friend with JAYO Photopolymer resin can use the 2K 4K 6K 8K LCD/DLP/LCD 3D printers to print your 3D Resin models.So,for most newcomers, its wide compatibility can be a good helper to print easily.

【𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐭 𝐓𝐞𝐧𝐬𝐢𝐥𝐞 𝐚𝐧𝐝 𝐁𝐞𝐧𝐝𝐢𝐧𝐠 𝐒𝐭𝐫𝐞𝐧𝐠𝐭𝐡】 Adding PUA (polyurethane acrylate) to the formula gives the resin excellent tensile and bending strength as well as hardness and toughness.It has past extensive testing and can perform under a normal tensile force and compressive stress. It can be stretched with good crack resistance capability so as to ensure no breakage on the model

【𝐁𝐞𝐭𝐭𝐞𝐫 𝐅𝐥𝐮𝐢𝐝𝐢𝐭𝐲 𝐈𝐦𝐩𝐫𝐨𝐯𝐞𝐬 𝐭𝐡𝐞 𝐇𝐢𝐠𝐡 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧】Improved fluidity significantly reduces curing time, and ensures a printing accuracy of ±0.1mm. It can provide high accuracy, smooth surface, clear print details and low shrinkage rate advantages for model printing. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.

【𝐅𝐚𝐬𝐭 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐚𝐧𝐝 𝐇𝐢𝐠𝐡 𝐈𝐦𝐩𝐚𝐜𝐭 𝐒𝐭𝐫𝐞𝐧𝐠𝐭𝐡】Benefiting the upgraded formulation, anycubic ABS-like resin+ has good fluidity, which can effectively increase printing speed, success rate and are easy to clean. And this 3D printing resin has an excellent combination of stiffness and toughness. It is not fragile and strong enough to withstand accidental falls from time to time

High Hardness and Toughness：Produces sturdy, impact-resistant parts. Ideal for functional prototypes and mechanical assemblies

Outstanding Performance: Low shrinkage and better printing precision. Vivid colors, excellent details, cures well with no discoloration, smooth surface with great resolution

Comfortable Experience: Prints fast with excellent finishing quality. Easy to clean and cure. Low odor, REACH and RoHS certificated

【Low Shrinkage & High Precision】Phrozen Aqua Resins are developed for low shrinkage and high precision printing. Their low warpage & dimensional stability are especially good for precise parts.

【Works best with 8K Printers】Aqua-Gray 8K resin works best with Sonic Mini 8K. You can easily create high-quality & extremely intricate 3D models.

【Wide Application】This resin can be used in a wide variety of applications such as precision model printing, complex prototyping, miniatures, & bust.

①【SUNLU Fast Curing Standard 3D Printer Resin】SUNLU's standard 3D resin cures rapidly upon exposure to 395-405nm UV light emitted by a resin printer(or resin curing machine). It is suitable for use with most 2K/4K/6K/8K resin 3D printers (LCD/DLP/SLA), delivering efficient and reliable results.

②【Low Shrinkage and High Precision 3D Resin】SUNLU's resin R&D team focuses on reducing volume shrinkage during the curing process to guarantee exceptional precision and stable performance. Experience outstanding print quality, enhanced accuracy, and reliable stability with SUNLU's low-shrinkage resin formula.

③【High Compatibility and User-Friendly 3D Resin】SUNLU engineers have extensively tested and optimized the performance of our resin on various printer brands, ensuring exceptional compatibility and ease of use. Whether you're a beginner or an experienced user, SUNLU resin offers a seamless printing experience with excellent results.

【Low Shrinkage & High Precision】A professional resin is designed for LCD, reducing volume shrinkage during the photocuring process , which ensures the high precision of the print model with a smooth finish.

【Rapid Prototyping】Rapid Resin can quickly infiltrate models, improve print speed, shorten the curing time, which is developed for reducing the forming time. Significantly reduce printing time with its excellent fluidity.

【Bright Colors】Cured model is easier to remove from the platform and the model printed with resin has a very pure and bright color effect just like an artwork.

【𝐄𝐱𝐜𝐞𝐥𝐥𝐞𝐧𝐭 𝐓𝐞𝐧𝐬𝐢𝐥𝐞 𝐚𝐧𝐝 𝐁𝐞𝐧𝐝𝐢𝐧𝐠 𝐒𝐭𝐫𝐞𝐧𝐠𝐭𝐡】 Adding PUA (polyurethane acrylate) to the formula gives the resin excellent tensile and bending strength as well as hardness and toughness.It has past extensive testing and can perform under a normal tensile force and compressive stress. It can be stretched with good crack resistance capability so as to ensure no breakage on the model

【𝐁𝐞𝐭𝐭𝐞𝐫 𝐅𝐥𝐮𝐢𝐝𝐢𝐭𝐲 𝐈𝐦𝐩𝐫𝐨𝐯𝐞𝐬 𝐭𝐡𝐞 𝐇𝐢𝐠𝐡 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧】Improved fluidity significantly reduces curing time, and ensures a printing accuracy of ±0.1mm. It can provide high accuracy, smooth surface, clear print details and low shrinkage rate advantages for model printing. Take a full shake before use in order to have a fully mix the functional components and fully mix the color paste in the resin. Otherwise, uneven coloring of the print may occur.

【𝐅𝐚𝐬𝐭 𝐏𝐫𝐢𝐧𝐭𝐢𝐧𝐠 𝐚𝐧𝐝 𝐇𝐢𝐠𝐡 𝐈𝐦𝐩𝐚𝐜𝐭 𝐒𝐭𝐫𝐞𝐧𝐠𝐭𝐡】Benefiting the upgraded formulation, anycubic ABS-like resin+ has good fluidity, which can effectively increase printing speed, success rate and are easy to clean. And this 3D printing resin has an excellent combination of stiffness and toughness. It is not fragile and strong enough to withstand accidental falls from time to time

【Safe and no irriation】ELEGOO Plant-based resin is made mainly from soybean yet still delivers amazing prints, which is BPA-free, has an ultra-low odor, and barely any pungent fumes, offering you a great and refreshing resin 3D printing experience.

【Great toughness and high precision】 ELEGOO Plant-based 3d printer resin has low brittleness and strong tenacity in model performance. With shrinkage as low as 3.72%, it could provide great modeling details and high accuracy for your 3D printed models.

【Wide compatibility and application】ELEGOO Plant-based photopolymer resin reacts to UV lights at 405nm wavelength and works well with most resin 3d printers or LCD MSLA 3D printers. It could be used for 3D printing from board game miniatures to industrial components.