Best Jets Inc in 2026

Hammer Length: 11" / 280 mm

Hammer Weight: 4 oz. / 140gr.

Hammer Head Length: 2-3/16" / 55.5mm

🟢 6" Bent Tip 45 degree Tweezers

🟢 JETS Product # 1419-63004

🟢 TWEEZER with PVC Rubber Coated Tips

STEEL SWAGE U-CHANNEL FORMING BLOCK & HAMMER PUNCHES SWAGE FORMING & SHAPING TOOL

A tool steel Swage Block with 1/2 round U-Channels/Grooves and a 90° V-Groove on the bottom of the block. The hardened tool Steel swage has 6 half round channels used for forming, along with a 90° V-groove on the bottom side for bending.

The punches are like hammers each one is made to use with the matching grooves of the block. Swage come with 6 hammer- punches which correspond to the grooves of the swage block. A very well made forming and shapping tool, with a good finish, channels are smooth and polished.

DIMPLES and NARROW STRIPES - Hammer Length Overall: 10" - Face Diameters are 1-1/8" – 28.6mm -Hammer Weight is 8oz.

STARS and CROSS HATCH - Hammer Length Overall: 10" - Face Width 1" – 26.3mm x 1/2"-12.6mm - Hammer Weight is 9oz.

CHECKERED and WIDE STRIPES - Hammer Length Overall: 10" - Face Diameters are 1-1/8" – 28.6mm - Hammer Weight is 8oz.

Materials : Head : A3 steel, Red and Black head: PVC, Metal handle: Steel pipe, Black handle: TPR.

One piece Yiyitools Double-Faced Soft Mallet – 35-mm, Red and Black in the box

The double-sided hammer head is made of new high-quality PVC material. Good wear resistance, good elasticity, does not damage the surface when striking, effectively protect the striking surface, durable. Anti - knock, anti - oil, anti - slip, longer service life. The black part handle made of high quality TPR material. Professional design of breathable and non-slip hole on the handle. No slip even when hand sweating.

Perfect shape and weight for small craft and jewelry work, fits comfortable in your hand!

Ball peen design has dual head for metal shaping: flat face for flattening and driving, and rounded face for riveting and peening

Whether you're just getting started or are an experienced crafter, this mini hammer will exceed your expectations

Ring Sizer Set is good value for quickly figuring out the sizes of rings and fingers

Essential Jewelry size measuring tools kit for professional and beginner, designed for wire working,craft wire, wire wrapping and wire jewelry, easy to use

The soft rubber hammer has two sides, can be used to flatten or strengthen wires, rubber head would not leave traces on the jewelry or damage your jewelry

Face diameter 1-1/2-inches

Head length 3-inches

Made in USA

Jewelry Hammer: These 1-pound metal stamps for jewelry making are designed with a grooved grip that helps provide the right amount of force for making jewelry, metal stamping, or working with leather

Dual-Sided: The double-sided craft leather hammer will evenly disperse energy while providing maximum force and precision while completing a woodworking or construction project

Reliable Quality: This jewelry stamp hammer weighs 1 pound with an ergonomic grip for additional comfort

➤High Quality: Made from industrial grade hardened carbon steel with a super-smooth surface for metalworking and custom jewelry stamping, steel hardness is 35 HRC

➤Polished Surface: The steel part is chrome plated with mirror finish, not easy to rust and corrode, super-smooth surface for custom stamping and texturing metal

➤Cushion Base: Soft plastic sleeve on-base reduces noise and rebound force when stamping to create more accurate impressions and prevents movement and damage to work surfaces

GENERAL USAGE: The Brass 1 pound metal stamping hammer was designed for metal stamping. It has a smaller and scaled down grip designed for easy handling and precision striking. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. This hammer is great for the beginner and intermediate stamper. Also works great for flattening wire for jewelry making

QUALITY: The brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Sturdy and grooved grip allows for maximum and precise strikes. The head is firmly attached to the handle. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow.

PRECISION: Because of it’s scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings. Helps to prevent double impressions and protects the longevity of your stamps. Brass is much better than steel for metal stamping because it disperses the energy of the hit into the stamping blank.

If you work with metals, you will need a hammer with rubber and plastic heads to avoid scratches

Use to flatten wire or other metal pieces

Head is 2 1/2 Inch long Heads narrow to 5/8 inch 9 1/2 Inches total length

Country of origin: China

No battery required

Material: Metal

⚒️ Quality Material of Small Mallet Hammer: This gunsmith hammer plastic head is made of stainless steel handle and one high quality rubber head and a plastic hammer head on other side. This carpenter hammer is perfect tool for delicate crafts.

⚒️ Wide Application of Adjustable Hammer: The soft hammer is delicate for glass and tiles but also strong and durable. You can replace heads of rubber mallet hammer non mark for interior decoration, jewelry, handicrafts, furniture assembly, wood floor installation, and as tile hammer.

⚒️ Replaceable Double Faced Hammer: This small hammers for crafts have double sided small heads with excellent wear resistance and elasticity. The soft rubber mallet will not damage the surfaces when vinyl mallet is hit, provide effective protecting on tile surface.

CHASING HAMMER: This two-sided embossing tool features a smooth, slightly rounded face that is used for chasing or indenting metal, while the ball-shaped side is used for peening or smoothing out dents in metal. Use to shape malleable metals such as pewter, sterling silver, aluminum, brass, copper, and nickel silver.

METALSMITHING TOOL: A 10.75-inch wooden handle is the base for this two-sided hammer and features a rounded end that increases hammer control and reduces hand fatigue often associated with metalsmithing. The 2.25-inch steel head weighs 3.5oz and has a 14mm ball pein face that is used for adding texture while the 28mm domed face is ideal for dapping metal.

GET CREATIVE: Use our embossing hammer to form indented textures and patterns on sheet metal. Use it to create custom made earrings, bracelets, necklaces, and rings. Use with leather, wire wrapping and riveting techniques to form steampunk, rock or heavy metal looks. Use in conjunction with embossing hammers to form domed shapes and other patterns. To protect your workbench and other surfaces, it’s best to work on bench blocks or with dapping or doming blocks.

OWDEN New design 3 in 1 metal stamping hammer, There are 3 material heads design for different craft working. The hammer is wrapped in ABS plastic, And the handle is wrapped in soft plastic to reduce the shock force when struck.

The steel head: The steel head part is fixed on the hammer,Chrome plated, And the hardness about HRC48-52. It can meet the use of the family.

The brass head: The brass head is screwed on the hammer body by the thread structure. And designed to prevent the unscrew after every hit. the brass head is softer than steel stamps, the brass head will dent when stamping. This is the correct result. In order to prevent the stamp from jumping during use,ghosting of the letters.

✔Includes HimaPro 4"x4"x1/2" hardened steel bench block and HimaPro one pound brass hammer

✔The stamping block: hardened, all surfaces smoothly polished, and chamfered to avoid sharp edges.

✔The hammer: solid brass head with flat and domed ends for proper and good hit; Rubber coated ergonomic short handle for easy grip and accurate strike.

Great For Leather Tooling & Punch Work; 10 inches long: Weight 11 Ounces

Great For Jewelry, Leather-craft, Woodworking - Interchangeable Heads

These hammer heads will not spark, or cause damage to precious metal surfaces

This high-quality steel hammer features a hardwood handle

Ideal for riveting and forming and making jewelry and repairs.

Features a chisel-end and a flat end on the opposite side

Metal Ring Mandrel - Made of aluminium material, marked with US Size standard, grooved size marked ring mandrel, fine workmanship With round outside and flat inside, smooth edges do not hurt your hands.

Metal ring sizer set - Made of steel, US size 0-13, come in half sizes.The ring sizes are clearly marked, easy to use and accurate to the size. Great for someone get into jewelry-making as hobby and on-line shopper for ring size determining.

Wood Mandrel - Used for ring repair, shaper, polishing and sanding, high quality jewelry making tools. (Note: There are no sizes marked on the wood mandrel)

OWDEN Professional metal stamps set inculding one set 27Pcs art font letter punch set (Uppercase) and one set 27Pcs art font letter punch set (Lowercase) and one set 9Pc art font number punch set , One metal crafter hammer and one metal bench block.

Letter punch (Uppercase)+ Letter punch (Lowercase) + Number punch are same art font ,Size: 3mm (1/8") You can freely form continuous phrases and digital imprints. (All stamps plastic case patented)

The professional design metal stamps hammer have 3 heads for use. One steel hammer head is fixed to the hammer body, The brass and nylon hammer heads will replace when you tap different tools. This is an essential professional hammer for artists (Patented)

Material: Our Two-sided Metal Texturing hammer head is made of high-quality steel and the handle is made of polished wood. This texturing hammer is durable enough to withstand many uses and ensures a quality finished product.

Design: This Texturing Hammer comes with 9 Interchangeable heads in different patterns and a polished wooden handle. Each hammer face is securely attached with a threaded collar and it is easy to change heads.

Features: The weighted head of the hammer reduces the amount of striking power needed. The ergonomic wooden handle enables a comfortable grip and sufficiently absorbs hammering vibrations to improve striking accuracy. You may use the small designs to pinpoint texture in a particular area and the large designs to cover a bigger area or use multiple tips to layer textures on one another.

【Double Head Hammer】Metal head and Plastic head. Beat on things without damaging them. Designed for safely installing small parts, assembling furniture and working with delicate materials and sensitive finishes.

【Multifunction】It can be used for repairing watches, DIY handmade crafts, chocolate, tuning, jewelry, leather crafts, woodworking and more.

【Portable】Compact in size 7 inches and light in weight 1.69oz, portable and convenient to use.

【WEIGHT & MEASUREMENT】: Head of the chasing hammers weighs 3 ounces, about 9.84"(25cm) Long, 2.24"(5.7cm) Wide

【Embedded Workmanship】: Hammerhead is embedded into the handle with a strong connection, can be used for a long time

【Chrome-plated Hammerhead】: Made of chrome-plated carbon steel, hard and high ductile; The working surfaces are highly polished, not easy to rust

Hammer Length: 11" / 280 mm

Hammer Weight: 4 oz. / 140gr.

Hammer Head Length: 2-3/16" / 55.5mm

PEENING HAMMER: This is a good general-purpose hammer that has one flat face and one rounded, also known as a peen hammer. The peening face is handy for spreading metal and rounding off edges of metal pins and fasteners, such as rivets or striking steel tools such as chisels and stamps.

METALSMITHING TOOL: This 9.5-inch, two-sided hammer features a lightweight wooden handle, which helps with hand fatigue sometimes associated with the frequent use of heavy tools. The 61mm steel head weighs 4oz and the faces measure 19mm.

GET CREATIVE: Use the ball pein side of the hammer for spreading and shaping metal, to create bracelets and necklaces jewelry or decorative home décor, such as plates, bowls, and wall art. The flat side is used for striking tools, such as stamps to create personalized jewelry or chisels to carve sculptures out of wood, stone, or metal.

Ideal for planishing, chasing, and striking metals

Designed with a 1-1/8" in diameter face

Heads are made from forge-tempered and polished steel

Great for riveting, shaping and light precision work

Hardwood handle

9-1/8 inch long

PROTECT YOUR TOOLS: Brass head mallets feature a heavy head that maximizes the efficiency of each blow and reduces bounce-back. This prevents arm fatigue and strain on your hand. Striking with a brass hammer prevents your metal from being thinned or marked by the face of the hammer and the soft brass head won't damage steel tools.

GREAT FOR ALL SKILL LEVELS: This striking hammer is great for students learning metal working techniques and well as those who do frequent metalsmithing. The 10-inch handle is made to provide a firm, comfortable grip as you work. The 2lb head means less striking force is needed and the large, 38mm hammer face means you’re more likely to hit your target and not your hand!

METALSMITHING TOOL: A brass hammer, also known as a dead-blow mallet, is the perfect choice for dapping, chasing, hitting punches for creating discs, riveting, and light stamping. When used with stamping tools, the brass mallet prevents unwanted movement because it has less reverberation than steel hammers.

2 FACES: The hammer has 2 straight, sharp-edged faces to imprint thin lines into metal.

TEXTURE: Use this tool on non-ferrous metal jewelry components or wire to add visual flair.

DURABLE STEEL: The hammer is made with a durable steel head, ideal for heavy-duty or intricate work.