Best Joofn in 2026

Replacement Brake Noodle and Boot Set.

Material: Stainless Steel and rubber.

Included 10 Boots and 10 Noodles(5pcs is 90° bend, another 5pcs is 110° bend), and 10pcs brake cable caps.

Included 5 Pairs Brake Handle Silicone Sleeve Mountain Road Bike Dead Fly Universal Type Brake Lever Protection Cover

Made from silicone gel, soft and comfortable.

Anti-skidding,waterproof, enhance the brake feeling, suitable for most of the bicycle brake handles.

Front 15mm boost hub adpater, Convert 100mm to 110mm.

Material: alloy 6061, CNC made.

This adapter allows a 15mm x 100mm thru axle hub to be installed on a 110mm wide Boost type fork. The wheel is then mounted and secured with your 15mm x 110mm quick release.

Waterproof sealed fuse holder, ideal for ATO ATC fuses. The water proof housing delivers the key to safely protect your wiring circuit instantly.

Quality 12-10 guage terminals delivers the key to firmly grip the fuse and housing.

Professional appearance provides you the ability to feel confident and proud of a show quality job.

Made of super strength and light alloy.

Compatible with:180mm front and rear.

For front & rear wheel PM to PM.

Bicycle Stem Bolt is made of steel, which is high strength safety assurance and durable.

Specification: M5x20mm with washer.

Bolt length 24.7mm, washer thickness: 1mm.

Compatible with: 0mm IS Front 160mm Rear 140mm.

Made of Super Strength and Light Alloy.

Designed for Avid, for Shimano, for Hayes, etc, MTB Disc Break system.

Full sealed long life control switch.

Material: Nylon + PVC casing + wire.

Low temperature resistance.

The disc brake mount is used on the B-pillar front fork collocation with a 203mm disc rotor. The disc brake mount is used on the rear fork of the B-pillar frame collocation with 180mm discs rotor.

Made of super strength and light alloy.

For IS front & rear wheel. Bolts and washers are included.

This is a flashlight mounting bracket, use for install a torch or flashlight.

Material: Plastic (bracket), Silicone (tie).

One minute install. Rubber band fixing, simple and secure mounting design.

Material: Choice soft TPR rubber, environmentally-friendly materials, fine workmanship. It will not go stiff, brittle and sticky in long-term use.

The length of the longer handlebar is 130mm, the length of the shorter handlebar is 90mm, and the diameter is 22.2mm.

Ergonomic groove grip design. It can support from the index finger to the thumb, offering the best grip for natural state of riding.

High quality rubber sleeve for bicycle.

Protect the paints of the bicycles.

Easy installation and removal.

This Silicone Scope Cover suitable for Trijicon RMR series scope only.

Made in high quality silicome, soft enough to keep from scratching the scope.

This weather resistant cover will protect the scope in all environments.

Compatible with: Front 180mm, Rear 160mm.

Made of Super Strength and Light Alloy.

For Front wheel IS to PM, 160 rotor to 180 rotor; Rear wheel IS to PM, 140 rotor to 160 rotor.

This replacement arrow brush is for arrow rest, it could be easy fix, it extend the arrow rest lifetime.

Designed to use with left and right hand bows.

Made of high quality plastic material, very durable.

BH59 Disc Brake Cable Hose Set.

For Shimano M355 M315 M396.

Material: olive connector insert and olive head made of copper; pressing screw made of stainless steel; tubing sleeve made of TPR rubber.

Suitable for Anderson Power SB50 Series connector.

Inset type design, can mounting into your dashboard, panel or chassis.

Voltage: 50A; Current: DC 12-24V.

The disc brake mount is used on the A-pillar front fork or rear fork collocation with a 203mm disc rotor.

Made of super strength and light aluminium alloy.

For Post Mount front & rear wheel. Bolts and washers are included.

The handheld air horn is made of aluminum and ABS, sturdy, anti-rust, durable in use.

Small and exquisite, won't occupy too much space, easy to carry and use.

This handheld air horn is processed by pump action using the compressed air and push the handle to create the loud sound. Don't need to replacement cans or chemicals, never run out of air, very environmentally friendly.

Post Mount Adaptor.

CNC machined anodized aluminum alloy.

Use for install 200mm 203mm rotor caliper on 180mm PM post; also use for install 180mm rotor caliper on 160mm PM post.

Suitable for Anderson Power SB50 Series connector.

Inset type design, can mounting into your dashboard, panel or chassis.

Voltage: 50A; Current: DC 12-24V.

The arrow rest sticker mainly adopting faux fur material, good anti-slip effect and abrasion resistant, also durable to use.

To protecting the arrow rest and prolonging its span life.

The arrow rest sticker is super lightweight, which is easy to carry and use, it won't add any burden to your arrow rest and help you have good experience.

Made of aluminiun alloy, light weight of 15g.

CNC made to precise dimension.

High strength to transit the brake power.

Perfect for quick release seat and seatpost component and accessory lock-up such as helmets when used with another Kryptonite lock.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

5mm BRAIDED STEEL CABLE

DOUBLE LOOPED CABLE for use with all Kryptonite U-locks, disc locks and padlocks

BENEFITS: Pro level polished cables combined with Slick-Lube liners offer enhanced shifting precision and long-lasting performance

COLOR: Black

FEATURES: Continuously lubricated LEX-SL linear-strand provides consistent, compressionless performance

(2) - Shimano Standard Zinc-coated Derailleur Cable Shift Cable (1.2x2100-mm)

Flex Cable Length: 15-feet & Thickness: 3/8-inch ; (480 cm x 10 mm)

Double looped cable compatible with all kinds of padlocks, disc locks, and U-locks

Ideal for locking bicycles cars, motorcycles, and all kinds of large equipment

Cable is constructed of a Twisted steel braid and durable vinyl jacket.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

5/8-Inch thick x 7 foot long

Cut resistant up to 3,300 lbs.

Outdoor bike cable lock with combination is best used as a bicycle lock and to secure other outdoor equipment.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit.

Cable bike lock features a preset, four-digit combination lock; Provides a basic security level that is best used as a theft deterent

Bike lock is made with braided steel for flexibility, and includes a protective vinyl coating that helps prevent scratching

OT-SP41 Stainless

Complete MTB gear cable set with all you need in one handy pack

Fitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one pack