Best Joywave in 2026

Easy Assembly,No tools required to assemble fishing rod holder,According to the installation instructions,you can assemble the rod rack Within minutes.

Robust and durable,fishing pole holder made of aluminium,Connected fittings made of Polyamide,Support beam recesses made of EVA,Lightweight and robust.

Large capacity storage,Rod holders for up to 24 rods,Holds 12 poles on each side(Holds approximately 10-12 large rod reels in total).

Country Of Origin : China

The Package Height Of The Product Is 1 Inches

The Package Length Of The Product Is 1 Inches

Utility twist Lock feature provides extra stability while securely storing up to 4 rods or combos

Molded from durable, lightweight polypropylene

Improved foam and twist lock rod holding mechanisms

Fully adjustable with mounting bracket

Securely holds all types of rods

Tough Polypropylene construction

BERKLEY HORIZONTAL FISHING ROD RACK: This fishing pole rack is an ideal solution for everyday anglers looking to keep their fishing rods safely stored and organized.

STORES UP TO 6 RODS: Soft foam grips keep your rods firmly secured without damaging the finish. Compatible with most types of fishing rods.

DURABLE, LIGHTWEIGHT CONSTRUCTION: This corrosion proof fishing rod holder is constructed from durable, lightweight materials.

Organize your rod collection - protect from damage & increase accessibility

For Indoor/Outdoor Use - not affected by sun or salt

Mount in garage, basement, boat, boat house, camp or cabin

Most popular value priced, positive locking, open style rod holder; Power Lock Interior Diameter: 1.95″; Mount Dimensions: 4″ x 2″ x 2″; Bolting Dimension: 1 5/16″ x 3 3/16″

Universal cradle holds almost any rod and reel setup and has a front locking ring to prevent rod loss when travelling

Includes 241 Combination Side/Deck Mount and can be mounted on top or side of gunnel

Single Construction

All-In-One Design

Easy Installation

Holds a baitcaster reel in a cushioned cradle; No mount included

A slot in the front of the rod holder allows for a spinning reel to be held securely in position

The rod holder design has a side mounted flange, which leaves the bottom open, allowing the rod holder to accommodate trigger grips

Holds 1-3 fishing poles upright for storage against a boat or garage wall

10.75" Rod holders with fishing reel slots

Also holds fishing lures, a filet knife, pliers, and tackle

Highly functional tackle storage cart that accommodates up to 12 fresh water rods

Adjustable middle wire shelf and smooth rolling casters allow room for your favorite fishing gear

Carbon fiber weave on base and top boards provide stability and durability

KEY FEATURES FOR FITS MOST RODS OR COMBOS - The PLUSINNO fishing rod holder can store fishing rods or combos of diameter 0.12"-0.75" (3-19mm), which can maximize the needs of fishing enthusiasts to store different types of rods. Most other brands are only applicable for rods diameter 0.28''-0.47'' (7-12mm). PLUSINNO Fishing Rod Storage Rack will organize most of your fishing gear in minimum space and nice to satisfy your needs of storage and display in daily life.

INNOVATIVE GRIP DESIGN - This fishing rod rack adopts an innovative structure. Applying the principle of eccentric circle, the arc-shaped designed grip roller can hold the fishing rods of different diameters firmly and securely. PLUSINNO fishing pole racks perfectly solves the problem of uneven force on different diameters fishing rods to ensure rods and combos are held securely in your rack which prevents your expensive rods from sliding down and damage.

STORE 9 RODS OR COMBOS - The PLUSINNO vertical fishing rod holder can store up to 9 rods or combos neatly and securely in less than 16 inches of horizontal wall space.Most other brands can only store 3 or 6 combos in the same amount of space. Fishing rods and reel combos can be mounted on the rack at any position of rod length, which make the reels can be staggered at different heights to minimize storage space.

KEY FEATURES FOR FITS MOST RODS OR COMBOS - The PLUSINNO fishing rod holder can store fishing rods or combos of diameter 0.12"-0.75" (3-19mm), which can maximize the needs of fishing enthusiasts to store different types of rods. Most other brands are only applicable for rods diameter 0.28''-0.47'' (7-12mm). PLUSINNO fishing rod storage holder will organize most of your fishing gear in minimum space and nice to satisfy your needs of storage and display in daily life

INNOVATIVE GRIP DESIGN - This fishing rod rack adopts an innovative structure. Applying the principle of eccentric circle, the arc-shaped designed grip roller can hold the fishing rods of different diameters firmly and securely. PLUSINNO fishing pole racks perfectly solves the problem of uneven force on different diameters fishing rods to ensure rods and combos are held securely in your rack which prevents your expensive rods from sliding down and damage.

2 PACK STORE 18 RODS OR COMBOS - The PLUSINNO fishing pole holder in 2 packs can store up to 18 rods or combos vertically or store 9 rods and reel combos in horizontal version, which meet the different storage needs. Fishing rods and reel combos can be mounted on the rack at any position of rod length, which make the reels can be staggered at different heights to minimize storage space.

Made of High Quality Material PC+ABC , Which is Strong and Durable. for long life

Easy Install and ready to use

30 degree angle designed head.

ADJUSTABLE FISHING ROD STORAGE: Holds up to 6 rod and reel combos, and you can adjust the spacing of the rack to suit your rod length (rods not included)

VERSATILE FUNCTION: Organize your fishing rod and reel combos on the wall or ceiling in your garage, shed, or other indoor or outdoor storage area. You can stagger your rod and reel combos by removing every other cap when storing your gear in a vertical position.

INNOVATIVE DESIGN: Rod handle caps are detachable and sliding track allows you to add, remove, or slide clips for extra customization

holds a baitcaster reel in a cushioned cradle

pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval

rod can be secured in the holder with a soft latching strap which snaps over the top

Three-position configuration

Spring-loaded tension knobs for quick rod adjustment

360° base can be top or side mounted

The Baitcaster/Spinning Rod holder is a versatile rod holder for any angler

The baitcaster reel sits in a cushioned cradle while a front slot allows for a spinning reel; The open bottom allows for the rod holder to accommodate trigger grips as well

Rods can be secured with a soft latching strap which snaps over the top for baitcaster or under the bottom for spinning reels

ORGANIZED ROD STORAGE: Neatly holds up to 24 fishing rods and fishing reels! Fits spinning, spincast, and baitcast reels.

WEATHERPROOF: Constructed from waterproof Versatex - no maintenance required. Hose down your rods right on the rack!

EASY ASSEMBLY: Rust-proof stainless steel hardware, drill bit, and assembly instructions included.

ADJUSTABLE FISHING ROD STORAGE: This high-quality brushed aluminum rod holder stores up to 10 rod and reel combos, and you can adjust the spacing with the sliding track feature to suit your rod length (rods not included)

VERSATILE FUNCTION: Organize your fishing rod and reel combos on the wall or ceiling in your garage, shed, or other indoor or outdoor storage area. You can stagger your rod and reel combos by removing every other cap when storing your gear in a vertical position.

INNOVATIVE DESIGN: Rod handle caps are detachable and aluminum sliding track allows you to add, remove, or slide clips for extra customization

HOLDS UP TO 4 RODS: The Spyderlok is designed to hold up to 4 rods with the exclusive height adjustable crossbar which measures 12-inches to 20-inches. The crossbar and each rod holder rotate 360-degrees.

FLUSH MOUNTING PLATE: The mounting plate lays flush to the vessels carpet which helps to eliminate those stubbed toes. Two easy to use knobs make removal quick and simple without the need for any tools.

SPYDERLOK TECHNOLOGY: Our patented Spyderlok technology insures tight secure locking angles and Sure lock adjustments with SpyderLok teeth offering smooth and easy pole angle adjustment.

Sand Spike

Fish-n-mate

Store up to 6 Rods or Combos- The Calamus fishing pole holder is able to store six individual rods neatly and securely in less than 14 inches of horizontal wall space. It is ideal for keeping your rods and reels in place. You can also adjust distance between two rod racks depends on your needs.

EVA Foam Grip and Durable ABS Base- The Calamus fishing pole rack is equipped with durable EVA foam grip pads designed to hold the poles safely and protect your rods from scratches. One size fits more. Applicable rod diameter: 0.28''-0.4''. The vertical fishing rod holder has a durable ABS base, which prevents rods from sliding down.

Interlocking System- Special interlocking design allows easy extension for more than two rod racks. If you have many fishing rods, two pairs are a better choice.

Store up to 6 Rods or Combos- The Calamus fishing pole holder is able to store six individual rods neatly and securely in less than 14 inches of horizontal wall space. It is ideal for keeping your rods and reels in place. You can also adjust distance between two rod racks depends on your needs.

EVA Foam Grip and Durable ABS Base- The Calamus fishing pole rack is equipped with durable EVA foam grip pads designed to hold the poles safely and protect your rods from scratches. One size fits more. Applicable rod diameter: 0.28''-0.4''. The vertical fishing rod holder has a durable ABS base, which prevents rods from sliding down.

Interlocking System- Special interlocking design allows easy extension for more than two rod racks. If you have many fishing rods, two pairs are a better choice.

Store up to 6 Rods or Combos- The Calamus fishing pole holder is able to store six individual rods neatly and securely in less than 14 inches of horizontal wall space. It is ideal for keeping your rods and reels in place. You can also adjust distance between two rod racks depends on your needs.

EVA Foam Grip and Durable ABS Base- The Calamus fishing pole rack is equipped with durable EVA foam grip pads designed to hold the poles safely and protect your rods from scratches. One size fits more. Applicable rod diameter: 0.28''-0.4''. The vertical fishing rod holder has a durable ABS base, which prevents rods from sliding down.

Interlocking System- Special interlocking design allows easy extension for more than two rod racks. If you have many fishing rods, two pairs are a better choice.

Store 6 Rods or Combos: The 13.6” width fishing rod storage rack holds up to 6 fishing rods and reel combos vertically to save your space. It’s better rotate each rod with reel differently to fit side by side. Design does not allow for straight lineup due to reel width. Good to keep your rods organized in the garage or on a boat.

Interlocking System: Special interlocking design of the rod racks allow easy expansion, one by one, make easy storage and looks orderly.

Easy To Install: The rod holder is easy to install and comes with 6 installation screws and drywall inserts. You can screw it into a wall and mount your rod rack gear on the wall, take less than 5 minutes to put up.

ROUND FISHING ROD STORAGE RACK: Round fishing rod or pole rack stores and displays up to 16 fishing rod and reel combos (fishing rod not included with this floor vertical fishing rod holder)

HANDCRAFTED WOOD POST: Solid wood center post makes this rod holder extremely sturdy. Beautifully crafted, durable wood makes for a traditional looking rod rack to blend in. Great for fishing rod garage storage rack.

SPACE SAVING DESIGN: The diameter of the fishing pole rack is 13.5" and this rod holder will store 16 fishing rod and reel combos. Both sturdy and lightweight design makes this easy to maneuver.

Comes with no mount

Rod holder 230

You can choose your own mount

Material: This fishing pole holder for kayak high quality ABS material for long time use, light weight and easy to carry it

Detail Size: Length: Approx. 7.9inch, Inner diameter: approx. 1.5-inch, Outer diameter: approx. 1.7inch

Easy Installation: This fishing tackle accessory with 3 screw holes can easily mount to any flat surface. 30 Degree dangle designed head for quick adjustment and ready to use

Product Type: Storage Rack

Package Dimensions: 1.27 L X 5.08 W X 34.29 H (Centimeters)

Country Of Origin: Canada