Best Karssit in 2026

【5T Cars Changing Tire】This Electric Hydraulic Jack suitable for vehicles under 5T (11,000 lbs) for tire changing. Equipped with powerful electric motor, it takes less then 2 minutes to lift the cars. The Lifting height range: 6.1-17.7 inch(155mm-450mm). Non-slip cross groove design. It Matches nearly all the vehicles that less than 5 ton like cars, SUV, sedan,pick up,truck. It is a good helper when you need change tire not only in roadside emergencies but also at home garage repairing.

【2 in 1 Kit】This hydraulic jack is a two-in-one set with 1pc 5T electric hydraulic jack & 1pc electric impact wrench,including 1pc safety hammer/1pc 3.5m power cable/1pc battery clamp jumper cable/2 spare fuses/1 pair of gloves/2pc user manual/1pc tool case etc.The electric impact wrench is DC 12V ,Rated power 80w,Max Torque 480N/M,equipped with two sockets (17/19 mm & 21/23 mm), to matching more vehicles with different size of lug nuts in the market.

【Easy to Use Necessity in car trunk】Only has a vertical lift control switch makes the panel easily understand and operate. Car jack 5 ton will automatically stop lifting after reaching the height limit.self-locking function to protect car not fallen-down during use if cut-off power.It is only 8.35kgs for the whole set. The velcro on the bottom of the box prevents it from sliding in the trunk of the car.This small hydraulic jack is easily to be storage in the car trunk when not in use.

Extended height, lightweight, steel jack stands; Sold in pairs

Lift range of 14" to 20-1/2" allows for higher clearance lite duty vehicles such as jeeps, SUV's, and UTV's

Saddle has a large surface area that provides better contact with the load being supported; Large foot base size of 8-9/16" by 7-3/16"

Product 1: Easily converted from creeper to seat for your maintenance convenience

Product 1: Thick padded cushions create a comfortable base for easy access and movement during your maintenance tasks

Product 1: 6 swivel casters for easy maneuverability. Vinyl padded seat and headrest

Product 1: Sturdy stamped Steel Construction with 6 ton capacity

Product 1: High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in

Product 1: Double locks mechanism with both handle locks and mobility pin

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

Hydraulic long ram jack has a double piston pump and clevis base designed for residential and commercial use

Features a lifting range from 24-13/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity; Clevis style base provides added versatility

Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength; Fits most garage/shop cranes, engine hoists, and more

Incredible Custom-design Loved by 300,000+ Tesla Owners: Fit for 2016-2023 Model 3/Y/S/X vehicles. Having the Tesla Jack pad prevents the risk of damaging your Tesla battery when changing the tires.

Battery Protection: The tools have a 25mm post that precisely aligns the jack pad tool in the jack point. Tesla adapter can be used in the auto repair shop to save yourself in emergency situations.

UPGRADE Material: Different from others in the market. Made from durable black rubber, without any chemical smell. One-piece Molding, sturdy and durable.

15 US TON Lift Capacity from the Toe, 30 Ton Lift Capacity at from the Top of the jack.

Lowest Minimum Jacking Clearance 1.125 Inches.

Machined Cylinder Housing improves the quality of the jack - Compare to traditional stamped sheet metal cylinder housing.

SMART: Lift and safely hold your car, CUV or small SUV without the need for separate jackstands. The patented design both lifts and holds by combining a bottle jack with a jack stand in one unit

VERSATILE: Use the Unijack on both Unibody and body on frame vehicles. You can also use it for construction projects such as deck joists - makes it easy to level

STRONG: The Unijack lifts and supports a variety of vehicles with 4000-pound capacity and lift range of 8-5/8" to 18-5/8"

Compression Load Range* 18,000 to 11,350 lbs.

Premium quality heavy duty high carbon steel

Finished with corrosion-resistant powder (exceeds ASTM-B117-85)

LOW PROFILE FRAME: For Easy Access Under Low Ground Clearance Vehicles

LIFTING CAPACITY: 6,000 lbs.

QUICK LIFT: Double Pump Pistons Raise Saddle To The Load Fast

HYBRID CONSTRUCTION The aluminum and steel frame provide the benefit of strength within a light weight chassis

LIFTING CAPACITY: 6,000 lbs. Ideal for the professional mechanic and enthusiast.

DUAL PUMP PISTONS Quickly raises the floor jack saddle to load

LIGHTWEIGHT ALUMINUM CONSTRUCTION allows you to roll jack around with ease

LOW PROFILE DESIGN lifts from 3 ½ to 19 ¼ inches

360 DEGREE ROTATING SADDLE allows for easier movement

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-1/4" and a maximum height of 13-3/8"; ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

BEST PROTECTION FOR YOUR CAR UNDERCARRIAGE: Seven Sparta jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.

MAXIMUM LOAD BEARING 3 TON: Made of heavy duty construction and durable rubber material, Only for 2-3 ton jack stand.

PERFECT CUSHION DESIGN: Jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.

Uses 24AWG pure, bare copper twisted-pair conductors

50Micrometer gold-plated contacts

Features molded, snag less strain-relief boots

Compression Load Range* 18,000 lbs.

Premium quality heavy duty high carbon steel

Finished with corrosion-resistant powder (exceeds ASTM-B117-85)

Product 1: Four leg steel base

Product 1: Made of heavy schedule pipe for added strength and stability

Product 1: Quick and easy height adjustment.Base Length:38.27 inch

BEST PROTECTION FOR YOUR CAR UNDERCARRIAGE: Seven Sparta jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.

SAFE & HEAVY DUTY CONSTRUCTION: Made of durable rubber material, Maximum Load Bearing 3 Ton.

PERFECT CUSHION DESIGN: Jack pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.

[Applicable Model] Use the original car data to break the would, one-to-one specifically designed for Tesla Model 3/Y/S/X.

[Function] When using a jack, too much gravity or too small a fulcrum will cause certain damage to the car. The rubber pad can protect the original car chassis from being worn and painted.

[High-Quality Material] It is made of rubber and is very durable. The soft rubber pad has a cushioning effect. The cushioning effect will transfer the possibility of deformation to the rubber pad without causing damage to the body.

Great Little Tool. This jack stand adapter allows you to lift the car from the jack point without bending that metal strip.It also helps to add extra grip to your jack to the car and height

Size Information.Floor Jack Rubber Pad Dimensions : 75mm/2.95inch Diameter 35mm/1.37 Height; Slot Dimensions: 10mm/0.39inch Wide 15mm/0.59inch deep

Durable Material.Floor jack rubber pad is made of durable rubber material for last long.Note:This jack pad maybe will have a little bit rubber smell when new.Please put it outside to ventilate some while

Great Little Tool. This jack stand adapter allows you to lift the car from the jack point without bending that metal strip.It also helps to add extra grip to your jack to the car and height

Universal Size Design.Maximum Load Bearing : 3 Ton.Pinch weld jack adapter can fit most jacks and vehicles.Please verify dimensions and ensure fitment to your vehicle

Size Information.Floor Jack Rubber Pad Dimensions : 75mm/2.95inch Diameter 35mm/1.37 Height; Slot Dimensions: 10mm/0.39inch Wide 15mm/0.59inch deep

【Heavy Duty All-Cast Construction Design】--The High Lift Farm Jack 48 inch all-cast jack is constructed with cast iron components for ultimate strength and durability. This jack is made of heavy duty solid steel construction, durable and sturdy to keep its shape

【High Quality Material】--Top winch connector clamp and powder coated finish with zinc-plated hardware standard on all jacks.Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.Lifting jack base is rugged construction with durable ABS materials for strong strength and long durability

【Adjustable Farm Jack】--With quick release spring loaded pin, this jack allows you to set the height what you need. The maximum lifting height is 107CM.The largest capacity of high lift farm jack is 3Ton (7000LB).For greater safety, this lifting jack is equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds

High Quality: Made from highly durable rubber and cross slotted design which will provide more cushion and crush resistance. This rubber jack pad may smell a little bit stinks when it's new. Please do not mind it.

Function: A ABIGAIL Jack Pad is designed to be sturdy enough to support your lift point while soft enough to preventing pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car.

Pad Dimensions: Diameter: 125mm. Thickness: 26mm. Jack pading/puck/caps: This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2 ton (4,000 lb) capacity with a minimum lifting height of 5-3/5" and a maximum height of 13"; Ideal for most cars

Safety bypass system prevents over-loading and ensures safe operation

Great Little Tool. This jack stand adapter allows you to lift the car from the jack point without bending that metal strip.It also helps to add extra grip to your jack to the car and height

Universal Size Design.Maximum Load Bearing : 3 Ton.Pinch weld jack adapter can fit most jacks and vehicles.Please verify dimensions and ensure fitment to your vehicle

Size Information.Floor Jack Rubber Pad Dimensions : 75mm/2.95inch Diameter 35mm/1.37 Height; Slot Dimensions: 10mm/0.39inch Wide 15mm/0.59inch deep

Capacity and lift range: Our trolley service jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8" which is suitable for many household cars

Special slow release: Our hydraulic trolley jack has a special slow release design which allow the vehicle down slowly and safer than other floor jacks

Longer use time: Our trolley jack is engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and the new automated casting process has good sealing performance, less oil pollution and a longer service life

Product 1: Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Product 1: Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Product 1: Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

【High Quality】Made from highly durable rubber which will provide more cushion and crush resistance. This rubber jack pad may smell a little bit stinks when it's new. Please do not mind it.

【Function】A ABIGAIL Jack Pad is designed to be sturdy enough to support your lift point while soft enough to preventing pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car.

【Pad Dimensions】71mm / 2.8 inches in diameter, 33mm / 1.3 inches height, Slot Dimensions: 13mm / 0.5 inches Wide 13mm / 0.5 inches deep.