Best Kauplus in 2026

Multiple use for removal and installation of harmonic balancers, gear puller, pulley puller

Idea for remove harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys, capable of handling 2 or 3-way bolt pulling applications works on most domestic V8 and V6 engines, pickups, SUVs and small engines with harmonic balancers with tapped holes

Set contains: (1) heavy duty forged three-way puller flange, (2) live-center forcing screws, (4) live-center adapters make a multi-functional remove/install applications easier

Idea for servicing drum brakes on most of import and domestic vehicles adjustment, installation and removal application

Various of TPR grip Brake Spring tool, each of spring compressor, brake spring installer, spring removal tool and brake retaining

Tri-function Brake spring pliers removes and replaces shoe return springs of drum brakes effectively

3/8-Inch Drive Magnetic Swivel Spark Plug Socket for plug removal and installation

Interior magnet retains the spark plug for positive installation, no more plug sockets dropping into the engine compartment

5/8-Inch long-reach, 6-Point, Swivel Spark Plug Socket set contains 4”, 6" and 11" lengths for all situations

Design for remove/install auto cars wheel tire nut screws/tire anti-theft screws

Set Contents: #0(10 Point), #1(11 Point), #2(13 Point), #3(14 Point), #4(15 Point), #5(16 Point), #6(17 Point), #7(19 Point), #8(20 Point), #9(21 Point) (Spline/Point)

Lug Nut Key Compatible with most of VW (Golf, Jetta, Polo…) and Audi (A4, A5, A6) wheel tire nut screw

Designed for a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers

Durable Drop-forged components can be used in a variety of combinations

Set contains: (1) Pair of Jaw Pins with Ball Spring, (2) Forcing Screws (Live Centre), (2) Cross-Bar Yokes, (2) Clamp Bolts, (3) Pairs of Puller Jaws, (3) Pairs of capped Bolts

For easy removes Locking lug nuts fit on a variety of vehicles with aftermarket lug nuts (spline, star, hex, and fluted hex locking lugs nuts)

Double-hex heads for use with 13/16-inch and 7/8-inch sockets and most lug wrenches

Come with SAE and Metric size that can be used on spline, star, hex, and fluted hex fastener

Flat nose for long reach applications and hard to reach spaces

Durable drop forged constructed from Cr-Mo steel made of fine polished

Crosshatch teeth offer a maximum gripping strength than the regular needle nose

Multiple functions designed utilized to pull out the gears, bearings, grease retainers and oil seals and flywheel etc…

Drop-forged carbon steel construction, three-jaw with precise machined claws for secure grip on the gears. Set contains 1 pc 3lb. Slide Hammer, 1 pc convex screw connection, 2 pcs Int. triple puller, 1 pc Ext. triple leg puller

Set contains: 1 pc 3lb. Slide Hammer, 1 pc convex screw connection, 2 pcs Int. triple puller, 1 pc Ext. triple leg puller

Idea for removes and installs steering pump pulley other press-fit pulleys

Fits pulley hubs with diameters of 1-1/8 inch, 1-1/4 inch, 1-5/16 inch and 1-3/8 inch

Includes adapters for several different vehicle models: GM 2.3L Quad 4 four-cylinder engines; GM 3.1L, 3100, 3400, and 3800 V6 engines

Drop forged dual-end deep flip socket, allows for quick and convenient fastener removal

Thin Wall dual-end deep flip socket desig allows access to reach the space where is limited

1/2-inch Drive Flip Lug Nut, included: 17mm x 19 mm, 21 mm x 7/8”(22 mm), 3/4" x 13/16", 7/8" x 15/16" And a 3" extension bar

Designed for removal of most of popular types of pitman arms, tie rods, and ball joints on most vehicles

Durable heavy duty forged 5 units tools constructed from heat-treated alloy steel with anti rust plating finish

The full range adjustable tool set with different shapes and size allows for both foreign and domestic vehicles ball joint removal application without fragile rubber boots damage by the press-screw design

Designed for work on European automotive vehicles’ repair and maintenance

A great set includes short, tamper proof and extra long XZN bit sockets, especially useful for repairs on most Euro automotive, compatible work with Audi, BMW, Mercedes, V.W.

Cr-V alloy steel Drop-forged construction, S2 steel bit for maximum strength and last longer

Offer Service for remove suspension strut from wheel bearing housing/front axle, also be used on replaced shocks, coil spring

Work on most of vehicle equipped with a pinch bolt style hub, compatible with Audi, VW, Mini, Ford…

Contains: each of 5.5 by 8.2 Millimeters oval bit end and 5.0 by 7.0millimeters oval bit end

General Automotive starter pliers set, Industrial & Precision Grade

Idea for professionals, outdoor bicycle sports and DIY enthusiasts

Durable drop forged constructed from Cr-Mo steel, with fine polished

Easily Disconnects Air Conditioning Lines and Quick Connect Fuel Lines

Designed to connect / disconnect quick connect coupling air conditioning and fuel lines, work on most of domestic vehicles with spring loaded connectors or four clip retention

This disconnect pliers with extra leverage designed providing extra leverage when disconnecting quick connect coupled A/C and fuel lines

2 Pieces Reversible Ratchet Wrench Set

Multiple sizes 4 in1 double-head ratcheting gear wrench have the most right size of your needs

Standard 6 Point, Anti-Slip designed allow you to easily tighten or loosen more rounded bolts

Idea for the PDR sheet metal processing, not only work on auto dent hail ding repair ,but also be used on motorcycles, refrigerator and other metal objects

Environmental POM material, won’t hurt car paint and scratch the auto surfaces

Set included: (2) 3/16" Radius tap down, and each of 3/8" Radius tap down, 1/8" Flat-Faced tap down, Bullet-Point tap down, 8"-1/4" Door Wedge and 10" Chisel Scraper

Idea for easily remove or install Harmonic Balancer without tapped holes on many GM vehicles

Durable single piece alloy steel construction, with 3 grip arm, no need to bolt into the balance, easy to remove the damper

This LS pulley puller with low-profile design allows you to remove the balancer without removing the radiator

2 Pieces Reversible Ratchet Wrench Set - SAE

Multiple sizes 4 in1 double-head ratcheting gear wrench have the most right size of your needs

Standard 6 Point, Anti-Slip designed allow you to easily tighten or loosen more rounded bolts

The torque wrench emits a click that can be heard and felt when the preset value is reached

Set contains: each of 17mm, 19mm, 21mm socket, 1/2" x 5" extension bar, Reducer 1/2" to 3/8"

Reversible 24-tooth ratchet head drives in both directions and measures torque in clockwise direction (Meets ISO 6789 with torque accuracy of ± 4%)

Designed for removes and installs the metric studs in difficult work areas

Set contains: 6mm, 8mm, 10mm, and 12 mm

Set features a 3/8 inch drive for 6mm and 8mm stud sizes, and a 1/2 inch drive for 10mm and 12mm stud sizes

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt.

Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.

Made with heat-treated, impact quality alloy steel.

FOR PRESSED-ON HARMONIC BALANCERS: Harmonic balancer tool is designed for pressed-on harmonic balancers with a single center retainer bolt; Uses 3 jaw puller arms with significant bite to grip and remove spoke-style pressed-on harmonic balancers

WIDE APPLICATION: Crankshaft harmonic balancer puller designed for use with Model GM 2000 Generation II Cadillac (1988 - Newer), Chevrolet Trucks (2003 - Newer), Chrysler (1990), Ford (1995 - Newer), and Mitsubishi Eclipse (1995)

EASY TO USE: Unique spring-loaded jaws hold the legs in place when positioning the harmonic balancer removal tool, making removing and reinstalling the harmonic balancer a relatively simple and inexpensive process

ITEM SPECIFICATIONS: Our Harmonic Balancer Puller Set is designed for removing damper pulleys in tight engine compartments without removing the radiator. The set features an enhanced design for optimal position retention, and the steel construction provides extra strength and longevity with a Black Oxide finish for corrosion resistance.

INCLUDES: This high quality set includes a 3-jaw puller, four lengths of forcing rods, a forcing screw with a 3/8-inch square drive for use with a ratchet and a 3/4-inch hex for wrench or socket use. It also includes a high quality storage case so you'll never have to go looking for a tool again!

COMMON APPLICATIONS: This set is compatible with Chrysler, compatible with GM, compatible with Mitsubishi, compatible with Cadillac, and compatible with Oldsmobile cars, SUVs, vans, and pickup trucks.

INCLUDES: This LS Harmonic Balancer Install Kit includes a threaded installer for installing harmonic balancers on select GM engine applications. This kit includes a heavy duty thrust bearing washer and one M16 x 2.0 threaded installer rod.

DESIGN: This harmonic balancer install kit’s contents feature solid steel construction with a black phosphate finish for enhanced strength and durability. The included heavy duty thrust bearing washer makes harmonic balancer installation simple, allowing for harmonic balancer installation on several GM engines.

APPLICATION: This kit services harmonic balancers, underdrive pulleys, and recessed crank threads on GM Gen III/Gen IV (LS-based) and GM Gen V (LT-based) V8 engine systems. This set includes one metric threaded adapters in M16 x 2.0 thread. *NOTE: This kit is for harmonic balancer installation only and will NOT remove harmonic balancers.*

Designed for oil and grease seals.Fit Type: Universal

Equipment Manufacturer (OEM) part that your vehicle came with.

parts can be challenging.

Head Adjusts to 5 Positions.

Two hook sizes easily remove most oil and grease seals.

Where clearance is a problem, remove the pin to reposition the head.

Removes and installs steering wheel and lock plate

Durable storage case with step-by-step instructions

Precision-built to meet or exceed ANSI standards

GREAT COMPATIBILITY: OAL 89mm, 1/2" square drive; can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications.

SUPERIOR QUALITY: Made with heat-treated, impact quality-GB 40CR alloy steel which has longevity longer much than other ordinary steel.

PERFECT DESIGN: Provide more energy to removing the bolt for designed with more than 3 times the standard socket mass to direct

Can be used on Chevy, Chrysler, Dodge, Ford, GM, Jeep and Mazda engines that use a 22 mm hex pulley damper bolt or other 22 mm applications

Use with 1/2" drive

Made with heat-treated, impact quality alloy steel