Best Kdp in 2026

Heater Hose Size:ID 3/4"(19MM) OD: 1.06"(27MM) 0.160" Wall Thickness - Nearly 3x the thickness of cheap hose.

Max Working Pressure 60 0psi, 1-Ply reinforcement construction for higher pressure resistance.

Polyster Fiber Reinforced for high pressure & resistant to coolant additives

ID 5/8"(16MM) OD: 0.95"(24MM).160" Wall Thickness - Nearly 3x the thickness of cheap hose.

Working Pressure 60 psi, 1-Ply reinforcement construction for higher pressure resistance or higher pressure resistance.

Polyster fiber reinforced for high pressure & resistant to coolant additives

Usage: Universal and widely used for conectors of the vacuum line and rubber heater hose in engine bay,also can use as the connector of coolant hoseUsage: Universal and widely used for conectors of the vacuum line and rubber heater hose in engine bay,also can use as the connector of coolant hose

High Quality Material:PA66-GF33 nylon with 35% glass fiber, high temperature resistant and durable

High Temperature Resistance: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)

Usage: Universal and widely used for conectors of the vacuum line and rubber heater hose in engine bay,also can use as the connector of coolant hose

High Quality Material:PA66-GF33 nylon with 35% glass fiber, high temperature resistant and durableHigh Quality Material:PA66-GF33 nylon with 35% glass fiber, high temperature resistant and durable

High Temperature Resistance: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)

Usage: Universal and widely used for conectors of the vacuum line and rubber heater hose in engine bay,also can use as the connector of coolant hose

High Quality Material:PA66-GF33 nylon with 35% glass fiber, high temperature resistant and durable

High Temperature Resistance: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)

Usage: Universal and widely used for conectors of the vacuum line and rubber heater hose in engine bay,also can use as the connector of coolant hose

High Quality Material:PA66-GF33 nylon with 35% glass fiber, high temperature resistant and durable

High Temperature Resistance: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)

Improved replacement - this window regulator and motor assembly features enhancements over the original design for greater reliability

Failure-resistant design - features cable tension springs to resist cable reel binding from insufficient tension

Simple replacement - no special tools are required to install this regulator assembly

Upgraded replacement - these heater hose elbow connectors are made of aluminum instead of brittle plastic

Smart solution - reduces the likelihood of the same part failing again the same way

Complete set - includes both upper and lower elbow with O-ring seal

Upgraded material - this replacement engine heater hose assembly features aluminum Y-connectors for added durability

Application specific - designed to match the original fit and function of heater hoses on certain vehicle years, makes and models

Complete replacement - hoses come with necessary clamps for easy installation

ID: 13/32". OD: 0.543inch. Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.)

Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications.

Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants.

Upgraded material - this replacement engine heater hose assembly features aluminum Y-connectors for added durability

Application specific - designed to match the original fit and function of heater hoses on certain vehicle years, makes and models

Complete replacement - hoses come with necessary clamps for easy installation

Good resistance to high temperatures for extended periods of time, which prolongs service life

Convenient 6-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard

Meets SAE 20R3 Standard Wall Class D-2 requirements

Some ACDelco Gold parts may have formerly appeared as ACDelco Professional

Premium aftermarket replacement part

Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

Upgraded material - this replacement engine heater hose assembly features aluminum Y-connectors for added durability

Application specific - designed to match the original fit and function of heater hoses on certain vehicle years, makes and models

Complete replacement - hoses come with necessary clamps for easy installation

Country of Origin: United States

Fits multiple makes and models (contact seller with your vehicle for fitment compatibility information)

Part number: KH-576

Good resistance to high temperatures for extended periods of time, which prolongs service life

Convenient 6-ft. lengths in self-service, reusable, recyclable package that can be displayed on pegboard

Meets SAE 20R3 Standard Wall Class D-2 requirements

Remains flexible for easy installation and cleaning

Resistant to the harmful conditions under the hood

Heat, ozone, coolant and kink resistant

Inner Diameter: 1/8 inch (3mm). Length: 5 feet (1.5m). Wall Thickness: 1/8 inch (3mm)

Made of high temp reinforced silicone

Work pressure: 0.3 to 0.9 MPA. Min temperature: -40 C. Max temperature: 220 C/428 F

ID: 3/8 inch, OD: 5/8 inch, 6 AN NBR liner hose fuel injection 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 6Mpa, Handles temperature ranges of -40 to +275 degrees F

Convenient and Environmental Protection - The hose separator clamp you can easily disassemble and install it, just use the tools in your garage. The material of the hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line. If you are a person who cares for the environment, this will be a good choice

Firm and Neat - The hose separators are used to improve the tightness between multiple tubes, then your line will become more organized and neat. And the project will become more pleasing. It will be very necessary, especially in cars or other small spaces

Strong Compatibility and Reusable - The double hose line separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on

ID: 5/8 inch / 16mm, OD: 0.9 inch / 23mm, AN10 NBR liner hose, 5 feet

Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines

Working Pressure 2Mpa. Burst Pressure 4Mpa, Handles temperature ranges of -40 to +275 degrees F

This heater hose is for LS water pump and loops the heater hose lines, which can prevent and fix the coolant leaking and engine overheating problem.

One end is 5/8 and the other end is 3/4

Replacement For LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 LFA LH8 LMG LS3 L98 L9H L20 L94 LZ1 L99 L96 LC8 L77

Durable, five-pattern spray nozzle turns any standard garden hose into multifunction spray tool

Engineered with aircraft-grade aluminum, stainless steel, fiberglass and comfort-grip soft rubber to withstand years of use

Fire hose nozzle construction

【Perfect Products Assortment】1 upgraded and premium rv water hose 25 ft and 1 hose storage straps. Prevents hose from becoming a mess and always keep your clean water hose organized with this free straps. What a perfect product assortment.

【Food Grade Fresh Water Hose】Gociean rv clean water hose is Certified of CA65 standard, lead free, BPA free and phthalate free. Healthier for your family during rv travel.

【More Durable Hose End Fittings】Compared to others, our hose fittings are covered by 2 PP material protector, more durable and preventing water leakage more effectively.

5 Piece Bundle Including One 6 Foot Piece of 3/4 Inch ID EPDM Red Rubber Heater Hose Made in the USA and 4 #12 Breeze Clamps

Heater Hose is Flexible and can be used for Cars, Trucks, Tractors, or Small Engines

Heater Hose is Nitrile Tube Construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover

Quality replacement - this heater hose connector matches the fit and function of the original equipment connector

Durable construction - this heater hose connector is made of quality materials for a precise fit and leak-free durability

Cost-effective solution - offers original equipment quality at competitive price

Specifically-engineered materials resist collapse under vacuum

Engineered to resist electrochemical degradation, the leading cause of hose failure

Pre-shaped to fit and to ensure perfectly sealed conditions

Nitrile tube that is spiral reinforced for enhanced durability

NBR-PVC cover that is oil resistant and resists the effects of high heat and ozone found in engine compartments

Vacuum rating of 24 in/Hg for sizes less than 12 in I.D., and 10 in/Hg for sizes 12 in to 34 in I.D. at ambient temperatures

Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function

Installs without buckling, bending out of shape, or straining at the connection for easy installation

Has all the quality features of a regular coolant hose for interchangeable use