Best Kinmade in 2026

This creative farmhouse towel racks for bathroom is of 15'' (385mm) total length with 12'' (300mm) hole pitch. The diameter of the cross section is 3/4'' (20mm). The diameter of the mounting plate is 3 11/32'' (85mm). Handle to door/wall clearance is 1 23/32'' (43.5mm). Please see picture for detailed measurements.

Package contains one black towel rod handle with two round mounting board and all the necessary screws.

Made of high quality steel with powder coated finish. The pipe like appearance is outstandingly industrial style and enhances your barn door with an extraordinary look. Additionally, it can be used as a towel rods for bathroom or grab bar.It will definitely be a view in your home.

【Retro Pipe Construction】: this is wall mounted wine rack also used as farmhouse wall wine rack, industrial iron and baking varnish reclaimed wood gives it a kind of Medieval Retro feeling.

【Size】:Width 23.6 x Height 11.8 x Depth 5.2 in.

【Easy to Assemble】:With the instructions and all the accessories included, this bar wall shelf for liquor is easy to assemble and disassemble.

Sometimes a shelf is so high that you hardly use the upper storage room because it is not convenient to reach. While a normal ladder might be a little bit too heavy for a teenager or a lady, these easy gliding rollers designed for ladders help you glide the ladder left or right with minimal effort.

Creatively designed and devotedly manufactured, this KINMADE SERENE roller is able to reduce the noise of rolling by an incredible amount. Additionally, each roller actually consists of two rollers, the design of which keeps the ladder from derailing, minimizing the risk of falling.

BOTTOM rollers are included in the kit.The position and angle to install the bottom roller can be adjusted to your most comfortable and satisfactory. It can even make up for the little shortness of the ladder (just to install the bottom roller lower). You could remove the bottom roller if you think it is dangerous to have rollers on both ends.

「Solid Wood」Material:Red Oak; Surface:Unpainted; State:Not Installed.Overall Dimension:19.7" L*7" W*93.4" H(500*175*2372mm).

「Package Listing」Ladder Wooden: 2*Side Rail, 8*Step,3*Steel Rod and all necessary screws.

「Simple Installation」With the professional instructions, loft ladder can be installed in a short time and can be enjoyed right away.

「Solid Wood」Material:Red Oak; Surface:Vanished; State:Not Installed.Overall Dimension:19.7" L*7" W*87" H(500*175*2200mm).

「Package Listing」Ladder Wooden: 2*Side Rail, 7*Step,3*Steel Rod and all necessary screws.

「Simple Installation」With the professional instructions, loft ladder can be installed in a short time and can be enjoyed right away.

Corrosion-resistant: Made of high quality carbon steel, this stair handrail is strong and sturdy, with corrosion-resistant powder coating finish, the stair railing kit could be used as outdoor stair railing, patio railing, porch railing, grab bars for stairs, this railing hardware can also be creatively used as industrial bar foor rail.

Home Decoration Highlight: This iron stair railing kit features industrial pipe style, with easy installation, it can immediately upgrade your stairway and hallway.

Each railing bracket can holds 400 lbs of weight, which can meet most of the situations and provide support. Railing brackets are standing 60mm or 2 3/8 inch away from the wall, which won't take much of your stairway space but still is confortable to grab.

This round handleset is used on wood doors. The diameter is 50mm,approximately 2''. It requires doors at least 1 3/8''(35mm).If the door size does not match, you can replace the screw by yourself.

Package includes a handle set and an additional set screws for door of more than 1 3/8'' thickness.

Simple can be beautiful. This round handle is designed for wood door or barn door. The stainless steel silver color goes on most common white primed doors.

✔[BARN DOOR KIT FEATURE] -Material:Stainless Steel;Surface:Satin;Shape:Spoke Wheel;Barn Door Sliding Weight Capacity: 200 lbs; Fit Door Thickness: 1.38" -1.57".Roller Size(H*W):4 3/4'' (120.5mm) and 3 1/3'' (84mm).

✔[HARDWARE KIT INCLUDED]-1*1830mm Track,4*Wall Spacer,2*Sliding Roller,2*Door Stopper,2*End Cap,1*Floor Guide. DOOR NOT INCLUDED.

✔[EFFORTLESS INSTALLATION]- We offer step-by-step graphic text instruction as well as instructional videos. During the installation process, to provide you with a simple and effective reference.

Sometimes a shelf is so high that you hardly use the upper storage room because it is not convenient to reach. While a normal ladder might be a little bit too heavy for a teenager or a lady, these easy gliding rollers designed for ladders help you glide the ladder left or right with minimal effort.

The clearance between the base of the shelf and the tip of the bottom of the ladder depends on the length of the ladder, which becomes the hypotenuse of the right triangle formed by the wall of shelves, the ladder itself and the floor between the base of the ladder and the wall of shelves. Using the Pythagorean Theorem you can solve for the distance you seek.

We have also given a simple formula: L =H-1 9/10'' (with L means Ladder Length and H means the point that the roller’s strap starts to bend, this point is also where the top tip of your ladder should be). Made with high quality steel and with black powder coating finish, this hardware set matches many colors of your shelf and ladder.

Sometimes a shelf is so high that you hardly use the upper storage room because it is not convenient to reach. While a normal ladder might be a little bit too heavy for a teenager or a lady, these easy gliding rollers designed for ladders help you glide the ladder left or right with minimal effort.

The clearance between the base of the shelf and the tip of the bottom of the ladder depends on the length of the ladder, which becomes the hypotenuse of the right triangle formed by the wall of shelves, the ladder itself and the floor between the base of the ladder and the wall of shelves. Using the Pythagorean Theorem you can solve for the distance you seek.

We have also given a simple formula: L =H-1 9/10'' (with L means Ladder Length and H means the point that the roller’s strap starts to bend, this point is also where the top tip of your ladder should be). Made with high quality steel and with black powder coating finish, this hardware set matches many colors of your shelf and ladder.

Sometimes a shelf is so high that you hardly use the upper storage room because it is not convenient to reach. While a normal ladder might be a little bit too heavy for a teenager or a lady, these easy gliding rollers designed for ladders help you glide the ladder left or right with minimal effort.

The clearance between the base of the shelf and the tip of the bottom of the ladder depends on the length of the ladder, which becomes the hypotenuse of the right triangle formed by the wall of shelves, the ladder itself and the floor between the base of the ladder and the wall of shelves. Using the Pythagorean Theorem you can solve for the distance you seek.

We have also given a simple formula: L =H-1 9/10'' (with L means Ladder Length and H means the point that the roller’s strap starts to bend, this point is also where the top tip of your ladder should be). Made with high quality steel and with black powder coating finish, this hardware set matches many colors of your shelf and ladder.

✔[BARN DOOR KIT FEATURE] -Material:Stainless Steel;Surface:Satin;Shape:basic”J”;Barn Door Sliding Weight Capacity: 200 lbs; Fit Door Thickness: 1.38" -1.57".

✔[HARDWARE KIT INCLUDED]-2*1525mm Track,8*Wall Spacer,2*Sliding Roller,2*Door Stopper,2*Anti-jump Pad,1*Floor Guide,1*Connector.DOOR NOT INCLUDED.

✔[EFFORTLESS INSTALLATION]- We offer step-by-step graphic text instruction as well as instructional videos. During the installation process, to provide you with a simple and effective reference.

KINMADE TEN roller is a top-mounted roller with height of 3 55/64'' (98mm).See picture for detailed measurements.Top-mounted rollers is able to bring the door as close to the wall as possible which adds to the privacy.

Made of high quality stainless steel and repeatedly tested before going onto the market, this piece is constructed for years to come. The hardware can handle doors of more than 204 pounds.

Inspired by Japanese home decoration philosophy and guaranteed by professional manufacturer, this contemporary hardware moves your barn door/interior wood door nicely and elegantly, which brings a another highlight to your home and assures you with outstanding quality.

A floor guide is used at the bottom of a sliding barn door to keep the door stay in its sliding track. This small yet functional floor guide is made of high quality POM nylon with long lasting durability.

Each set of floor guide consists of two identical parts. Each part is 1.77''(45mm) long, 0.79''(20mm) wide and 0.91''(23mm) high.

This floor guide could be installed in multiple ways, you could cut a slot/groove at the bottom of your door and use only one part of the floor guide OR you could use one at each side of the door to let the door slide in between.

✔[MDF&PVC Material] The barn door is made of MDF and frosted tempered glass, which is durable and stable. Prefinished PVC water-proof surface can strengthen the protection.Door Panel Dimension: 30" W x 84" H x 1-3/8" D.

✔[Modern Design] The elegant glass barn door is trendy decor for interior.Enjoying the natural light and privacy is the biggest highlight, with a visual sense of added space.Our glass largely prevents dust and hard water from accumulating. Easy to clean,even after a long time of use, can still maintain a high gloss and bright.

✔[Widely Use] Our DIY door suitable for dining room, study, attic, living room, bathroom, kitchen, storage and so on.Saving home space, harmless and easy cleaning.

The most classical sliding barn door hardware kit with J shape roller in a very unique and attractive oil rubbed bronze color, which will make your interior decoration impressive and characteristic.

The luxurious brushed edge is delicately done by hand which makes every piece valuable.

Made of high quality steel and guatanteed by manufacturer, this piece is constructed for years to come. The hardware can handle doors of more than 200 pounds.

● [BARN DOOR HARDWARE KIT FEATURE] -Material:Carbon Steel; Surface:Gold/Brass Antique Bronze;Shape:Basic "J";Single Barn Door Weight Capacity: 200 lbs; Fit Door Thickness: 1.38" -1.57".

● [HARDWARE KIT INCLUDED]-1*1700mm Track,4*Wall Spacer,2*Sliding Roller,2*Door Stopper,2*Anti-Jump Pad,1*Floor Guide. DOOR NOT INCLUDED.

● [ASSEMBLY EASY]- We offer step-by-step graphic text instruction as well as instructional videos. During the installation process, to provide you with a simple and effective reference.

「Smooth Motion」Wall-mount concealed top floating sliding system,will be more space saving than conventional, no need to reserve an empty wall for pushing the door.The upgraded rollers are not only more durable, but also facilitate a smoother and quieter push and pull of the door.

「Superior Quality」Material:Carbon Steel; Color:Matte Black;Supporting Weight Capacity: 200 lbs; Suitable Door Thickness: 1-3/8"~1-5/8"; The height from top of the door to the top of the roller is 5-5/16".

「Package Listing」1*970mm Track,2*Roller,2*Roller Bracket,2*Spacer,1*Roller Screw,1*Door Guide and 3*Hinge.DOOR NOT INCLUDED.

KINMADE APEX roller is a top-mounted roller with height of 4.52'' (115mm) with the mounting base 2 3/4'' (70mm) wide.See picture for detailed measurements.Top-mounted rollers is able to bring the door as close to the wall as possible which adds to the privacy.

Made of high quality stainless steel and repeatedly tested before going onto the market, this piece is constructed for years to come. The hardware can handle doors of more than 200 pounds.

Inspired by German style home decoration and guaranteed by professional manufacturer, this contemporary and industrial hardware brings a another highlight to your home and assures you with outstanding quality.

This is your best and cheapest way to get high quality and contemporary handrail.Made of stainless steel with brushed satin finish, this rail is very sleek and good for both indoor and outdoor installation.

This wall mounted handrails with curved brackets offer an attractive, clean look and are easy to install with no welding or re-polishing required.

KINMADE 8FT (2.4m) Handrail Kit includes: 2* 1.2M (4FT), Φ42.4mm (1 11/16'') Stainless Steel Handrail; 4 Stainless steel wall mounting brackets; 2 Stainless steel end caps; 12 M6*45 flat head self-tapping wall mounting screws; 8 M5*20 oval head self-tapping railing mount screws; 1 Handrail Connector.

「Solid Wood」Ladder Material:Red Oak; Surface:Varnished, you can paint after polish it; State:Not Installed.Overall Dimension:16'' L*3 1/2'' W*108'' H(406*89*2743mm).

「Durable Steel」Ladder Hardware Set Material:Carbon Steel; Color:Black; Surface:Anti-rust Coating.

「Package Listing」Wooden Ladder:4*Side Rail, 8*Step, 1*Top Rung,2*Connector,4*Steel Rod and all necessary screws. Ladder Hardware:1*3.3FT Track,2*Upper Roller,2*Upper Roller,2*End Cap,2*Stopper and all necessary screws.

This adjustable door guide is designed for sliding glass doors from 1/4" to 7/16" thick.

Adjust the plastic insert position for glass of different thickness. Positions: #8 is for 1/4" thick glass, #10 is for 3/8" thick glass, #12 is for 7/16" thick glass.

Item is made of stainless steel so that it can be used in wet condition, for example, sliding shower doors. It can also be used on interior sliding glass doors in commercial or residential buildings.

This round handleset is used on wood doors. The diameter is 50mm,approximately 2''. It requires doors at least 1 3/8''(35mm).

Package includes a handle set and an additional set screws for door of more than 1 3/8'' thickness.

Simple can be beautiful. This round handle is designed for wood door or barn door.The powder coated finish goes perfectly on original wood color.

This round glass door knob is constructed of high quality durable stainless steel, anti-rust, anti-corrosion.

Dimension of one side is 2.3*2.3*0.5 inches .Please see picture for detailed measurements.

Ideal for glass doors, bathroom doors, sliding glass doors etc, fits 4.0mm(0.16") to 16.0mm(0.63") thick glass.

Made of high quality stainless steel, this window/door/porch/patio glass awning system hardware is able to hold up to 230lbs (100kg) glass.

This glass canopy offer a high-level architectural integration that provides protection from all weather elements, the angle of the canopy can be adjusted to 90°and 95°allowing water to flow through easily.

Application: 6+6mm PVB laminated tempered safety glass, standard sizes for glass are 1200mm/1600mm/1800mm/2000mm/2500mm/3000mm Length x 900mm/1200mm Width, and this will suit most door openings.

Oil Rubbed Bronze Finish; made from durable zinc alloy

Fixture Width: 6-7/22-Inch (15. 8 cm) ; Fixture Projection: 2-1/4-Inch (5. 69 cm)

11-Lbs (5kgs) max weight capacity

Rustproof: This bathroom towel bar is constructed of premium grade SUS304 stainless steel and added with 18/8 Chromium/Nickel content to protect against corrosion and rust, suitable for humid environments such as the bathroom and kitchen.

Keep Clean and Hygienic: The distance from the towel holder to the wall is 3.2" (81mm). With the proper distance, this towel hanger can avoid the towel touching the wall surface.

Dimensions: Overall length is 25.5" (650mm). The length from the center of one mounting post to the other is 24" (606mm). Having your towels fully spread out with this towel bar, speed up drying.

Clothes drying rack for energy savings and gentle drying so your clothes last longer

Made of durable yet lightweight steel that is easy to move from room to room; supports up to 32 pounds

Accordion design folds flat for compact storage

Satin Nickel finish; made from durable zinc alloy

Fixture Width: 6.5-inches (16.51 cm); Fixture Projection: 2.5 inches (6.35 cm)

11-Lbs (5kgs) max weight capacity

Screw-Mounted: Screw-mounting installation with stainless steel screws and anchors are in the package. Max. Load: 11 lbs (5 KG) screw-mount on solid concrete wall.

RUSTPROOF: Constructed of Type 304 premium grade stainless steel, with added 18/8 Chromium/Nickel content to protect against corrosion and rust, suitable for humid environments such as bathroom and kitchen.

DIMENSIONS: Overall length is 23.6" (600mm). The length of hanging space is 21.3" (540mm). Projection is 3.2" (81mm). This towel bar can be used in kitchens, baths, and laundry rooms.