Best Kocriz in 2026

【Attentive Quality Service】ONE-YEAR warranty and Lifetime service. Multi-channel contact information has been being available, and a large amount of various materials related to CNC practical operation have been summarized and sorted to ensure that any customer inquiries about CNC machine and operation can be handled quickly and conveniently. Such as: Candle, LaserGRBL, Easel, Fusion360 etc.

【Focus on Precision & Performance】Use stainless steel screws, a full set of high-quality bearing parts and high-precision screw/polished rod to extend the service life of the machine and ensure the engraving effect of the machine. The new shock-absorbing 3D punching spindle clamp effectively relieves the vibration of the high-speed spindle.

【Humanized Design】Equipped with an upgraded GRBL1.1 motherboard.Three new large handwheels can be accurately positioned to eliminate tedious software adjustments.Four bottom rubber feet are shock-absorbing.And non-slip to avoid scratching the desktop, equipped with a 1000RMP silent spindle to protect your ears.Pre-installed X&Z- Axis reduces installation difficulty and saves time.

Built to Last: The swivel vise is forged from sturdy 60,000 PSI ductile iron, with a powder coating on the surface for a rust-proof finish. High-quality nuts and screws increase durability. Replaceable serrated jaw plates are made of premium carbon steel for superior grip. Go above and beyond and knock out all those tough projects!

Large Anvil Area: The strong design comes in handier when you take the 2.8" x 3" anvil into consideration. Jaw Width: 6.57" / 16.7 cm. Forward Jaw Opening: 6.5"/ 16.5 cm. Reverse Jaw Opening: 9.3"/ 23.5 cm. Throat Depth: 3.5"/ 8.8 cm. Creates up to 20 k.N / 4496 lbs of clamping force.

Considerate Vise Kit: The updated accessories of this vise are now more thoughtful than ever! Comes with a set of nuts and screws and magnetic jaw pads for hassle-free installation. No need to purchase extra fittings. They can be easily installed on your bench upon arrival. Set up and get to work!

Product 1: Unique roller system holds down workpiece and pushes into fence for precision stock feed

Product 1: 1-1/2" urethane one-way rollers set at 5° toward fence and 2-3/4" total adjustment

Product 1: Includes one infeed stock guide, one outfeed stock guide and detailed instructions

【HIGH PERFORMANCE ER16/ER32 SPRING COLLET】-All critical collet surfaces are precision ground for an accurate fit. The total runout is less than .0003.

【EXCELLENT STABILITY】-ER collets are slotted alternately from both ends, and therefore they have excellent grip on the cutter shank.

【WIDE CLAMPING RANGE】-Diameter Range: 16th: 1/8, 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"; 32nd: 1/16'', 3/32'', 5/32'', 9/32'', 11/32'', 13/32'', 15/32'', 17/32'', 19/32'', 21/32'', 23/32'', 25/32'', 13/16''.

High Quality Steel and Aluminum Construction

Cut Cedar, Walnut and Oak into High Quality Lumber

High-Quality Mill Cuts Beams or Lumber from 0.5“ ”To 13“ Thick and 36” Wide

High Quality Steel and Aluminum Construction

Cut Cedar, Walnut and Oak into High Quality Lumber

High-Quality Mill Cuts Beams or Lumber from 0.5“ ”To 13“ Thick and 48” Wide

Class leading values got even easier to use. Pre-assembled and no fuss with assembly taking less than 30 minutes out of the box. An entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.

Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.

Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.

【MEASURING RANGE】Measuring range: 0-150mm/0-6’’,Accuracy: ±0.06mm/0.002’’,Resolution: 0.01mm / 0.0005’’

【READING】Inch, fractional & metric reading

【LARGE REMOTE LCD DISPLAY】Remote readout display convenient for reading and operation

√ Great Value - Processing the coolant can save more than 80%, the cooling effect is no less than the conventional water-cooled.

√ Working Safer - Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up.

√ Save Time - Not only increases the machining cutting speed, save time and reduce processing costs and tool wear.

The nebulizer gas and coolant is adjustable, easy to use on different processing conditions

Gas processing chips are blown away, working safer; A lot of water problem solving tools, easier to clean up

Widely Used - In the liquid without pressure output required to ensure that the air pressure in the range 5-7KGF / CM2.

Solid Cast Iron Construction: Swing: 6-1/2"/168 mm. The dividing head features a rigid mirror finish that is wear-resistant, a good choice for long-term use. Its delicate parts work perfectly, mathematically dividing the materials to be cut.

Easy of Adjustment: The headstock of the dividing head for the milling machine can tilt from 10 degrees below horizontal to 90 degrees vertical so that you can handle the stuff of different sizes by changing its angle.

High Precision Indexing Plate: The universal dividing head comes with a direct indexing plate and an interchangeable one on the head, and two replacement interchangeable ones with different numbers of holes. It's the dividing plates that set the precise distance between cuttings.

New Version: Genmitsu Cnc 3018-Pro Is An Upgraded Version Of 3018. All Components Do Not Need To Be Positioned, Which Greatly Reduces The Difficulty Of Assembly And Improves The Working Accuracy. The Base Height Is Raised To 4Cm For Better Stability. Capable Of Cutting All Types Of Plastics, Soft Aluminum, Woods, Acrylics, Pvcs, And Pcbs, The Genmitsu Can Be Used On A Wide Range Of Projects And Materials

Upgraded Power Adapter: Ul Approved And Out-Of-The-Box Support For The Drop In 20,000Rpm Spindle, No Need To Modify G-Code To Ramp Up To Full Speed

Controller Software: The Genmitsu 3018-Pro Uses Grbl, A High-Performance Open-Source Software For Controlling Movement, And Runs On Arduino. Its Dependability And Simplicity Make Grbl An Industry Standard, So There’S No Lack Of Support And Resources Available When You Get Stuck. Includes Carveco Maker Cam Design Software And Candle For Controlling Your Machine And Running Your Gcode Design Files

CNC Z-Axis router mill touch plate tool setting probe new milling hot kit.

CNC router engraving machine tool setting auto-Check instrument 1.38inch

CNC router mill: Z-Axis tool setting touch plate works

Premium Quality Structure: The jaw of the bench vise is made of 45# steel. After high-frequency quenching, the wear resistance of the jaw is improved and the service life is prolonged. The vise body is HT250 high-quality cast iron forging with good toughness, high strength, and durability.

Powerful Clamping Force: Vise guide surfaces are finely polished and smooth. When clamping the workpiece, the movement is stable, the positioning is accurate. Jaw Width: 3" / 80 mm, Jaw Opening: 3" / 80 mm. The clamping force can reach up to 15 kN, which is suitable for different sizes of goods.

High Accuracy Screw: The closed design protects the screw rod and prevents the entry of iron pins and other debris, convenient for maintenance and cleaning. Our screw is of high quality and is not easily damaged. The parallelism and perpendicularity are accurate to 0.002".

【PREMIUM QUALITY STRUCTURE】- The whole bench clamp is made of high-quality material with high hardness and stiffness. Designed for long-term service time.

【POWERFUL CLAMPING FORCE】- After fine grinding treatment, the surface of the clamp is smooth and flat. Clamping the workpiece without shaking, and the machining accuracy is higher. Jaw Width: 4 inch(100 mm);Jaw Opening: 4 inch (100 mm).

【HIGH ACCURACY SCREW】- The screw rod is made of high strength material which is not easy to deform, wear resistance, and achieves smooth rotation. Accurate to 0.002" on parallelism and squareness.

Huge Cutting Capacity: The cutting capacity of the band saw: without base: 4.7"x4.7" deep-cut capacity for rectangular stock, 5" capacity for round stock. With base: 3.9"x3.2" deep-cut for rectangular stock, 3.93" for round stock.

Powerful Motor: 1100W 10 amp powerful, pure copper motor, designed with controlled power to withstand any jobsite application. Cutting Speed: 137.8-472.4ft/min, provides quick and smooth cutting with no sparks and burrs.

Ergonomics Design: Superior balance allows for more accurate cuts. Ergonomic soft grip back handle provides comfort during use. The saw blade guard can be adjusted to avoid the saw blade from jamming and is safer without hurting your hands.

Competent drilling of micro holes down to1/64" (0.5 mm) with extremely high rotational accuracy

High quality machined work table of ribbed die-cast aluminum (work table size 8 1/2" x 4 3/4" (220 x 120mm))

3 spindle speeds of 1,800, 4,700 and 8,500rpm allowing triple torque at lower speeds

【TECHNICAL PARAMETER】- Product: S-R hanging flex shaft mill, Type: Electric, Power: 230W, Grinding Head Diameter: 0-4 mm (0-0.16 inch), Chuck Size: 4 mm (0.16 inch), Speed: 0~18000 rpm, Suitable For: Carving, polishing, grinding.

【ACCURATE HAND PIECE】- Adopting the precise three-jaw chuck with stable and reliable features, it has a long service life and a wider clamping range. High-precision aluminum alloy is not easy to rust and comfortable to hold.

【CONVENIENT PEDAL】- The foot pedal, made of engineering plastics, is durable and is not easy to generate heat. The large pedal design makes it easier to handle. It can realize stepless speed change, making the work faster and more convenient.

Easy to Set Up: The pre-assembled module of XYZ axis and wires dramatically reduces effort of assembly, allowing you to start carving your projects in less time. 3-Month Carveco Maker Subscription is included. Turning your ideas into the next fun project or your own work of art will be much easier with Carveco Maker. We will email you the subscription link after you place the order.

More Power: New completely redesigned control box and drive system, beefy C-BEAM Frame, precision NEMA 23 stepper motors, High Power Spindle and included adapter for a drop in Dewalt DWP611 upgrade.

No additional parts required: Everything you need out of the box, no stripped down kits or addons, the Genmitsu PROVerXL 4030 CNC router already includes all of the accessories and components you need at an affordable price, including XYZ axis limit switches, emergency stop switches,speed control, Z-probe and more.

4040-XE CNC Router uses 300W spindle and NEMA23 stepper motors, which are more powerful and efficient. Max moving speed is 2000mm/min and spindle speed range is 0~10000.

Control board, power supply, emergency stop, and wires are integrated into a newly design box, which is simple for operation, easy to clean and safe. The controller has a 3.5” touchscreen LCD which also functions as an offline controller. The input voltage is 110V.

It’s capable to engrave, cut and drill many different kinds of material such as wood, metal, MDF, acrylic, foam, resin, nylon, carbon fiber, PCB and etc. It’s great for home use and business.

Can be widely used model, wood boards, plastic sheeting, aluminum, composite panels, resin panels, thin metal, circuit boards, precision machining of hard materials and other non-specific drilling.

Is hardware processing, mold making, document binding, electronic manufacturers, scientific experiments and other units of the ideal tool.

This mini drill press with 6-Speed ranges. You can drill precise holes with this product and it is great for small and precise work. It is easier to use and more accurate than hand-held drills. It is useful for jewelers, woodworkers, mechanics, hobbyists, home, workshop, arts and crafts.

Model: Al-310S; Type: X traverse; Voltage: 110V, 50/60Hz

Rotate speed: 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min

Small volume and easy installation power feed, jog function operates at any feed speed; Excellent speed control in the entire range

High quality material: This Coolant Spray System is made of plastic, metal and brass to meet the needs of high hardness, high toughness and high stability. High safety factor, you can use it with confidence. All-in-one for cooling, lubricating and blowing metal chips.

Easy to use: The nozzle of the coolant Spray System is easy to operate, which can save more than 8/10 of the processing coolant, and the cooling effect will not be reduced. The gas processing chip can be blown away, making the work safer, and the air flow and spray volume are adjustable, making it more convenient to use.

Design: This Coolant Spray System adopts a special design, the direction can be rotated, and the atomizer gas and coolant can be adjusted to suit different needs. Even carbide precision machined workpieces can achieve smooth surfaces.

This upgrade kit is designed for FoxAlien 3018-SE V2 and Masuter CNC router machines. The 300W spindle can directly fit into the spindle clamp of 3018-SE V2. No need to interchange other clamp.

The default input voltage is 110V. The power supply output is 48V. The power supply is integrated into a control box, which is safer and easier to clean. (If you need to use in 220V, pls contact us).

It has a power switch and speed adjust button for convenient operation. Spindle speed can be adjusted manually.

♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers;3018 PRO MAX machine is very easy to install,stable structure,our parcel also include english user manual.

♞【Working area】30x18x4.5cm;Frame size: 42x35x27cm;Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux; Can't support Apple product ; Supporting files:G-code (.nc/.txt/.tape/.gcode)

♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min; Collet: ER11 3.175mm (Can be equipped with 0-7mm); Nema17 42 stepper motor 1.3A/0.25N.m

X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs.

Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions.

High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well.

Mini multifunctional working table 6330.The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines.

The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.

Table size: 330 × 95mm. Hand wheel with adjustable scale:A ring=1.5mm.

· Work table size : 350mmx100mm, Height : 122mm.

· Hand wheel with adjustable scale，A ring=3mm. Zero adjustment handwheel rotates a circle of 1.25mm, A lattice is equal to 0.05mm.

· X axis travel : 180mm,Y axis travel : 50mm, Distance between grooves : 34mm.

The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.

The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy

The working table comes with three T shaped groove, standard size is 15x8x6mm.

Small and beautiful - the accurate mill for lab, optician, jewelry, electronic and model building projects

Supplied with a stable base of cast iron, vertical column and compound table are of treated, high quality aluminum

All axes are play-free and have adjustable slides, headstock, made of die-cast aluminum