Best Koni in 2026

Big handling improvements

Reasonable ride quality

Re-buildable for custom vehicle setups

Entry level performance shock absorber

Compliments lower springs

Perfect for OE replacement or vehicle improvement

CUTTING-EDGE TECHNOLOGY – Road Armor is engineered to obtain maximum absorption. With its anti-shock technology, road shock and vibrations are dampened, resulting in less chucking and less strain on the trailer

ALL-AROUND PROTECTION – The patent pending design uses a single pivoting arm that is permanently engaged with the trailer axles’ leaf springs. This allows it to constantly absorb and dampen road shock from the leading or trailing spring, utilizing the trailer’s natural motion

ULTIMATE UPGRADE – Road Armor was designed to offer RVers and trailer owners a superior suspension enhancement solution that can be added as an easy aftermarket upgrade, and is also offered as an exceptional substitution for torsion axles

Less wear, longer life, greasable (where applicable) cold-forged rod for superior strength and stability.

Full-ball stud with a larger wear surface for extended life.

Multiple wrench-flats for easy installation.

Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information

Kit Includes: 2x Front Strut Assemblies + 2x Rear Shock Absorbers

Piston seal adjusts as it wears to maintain a tight seal between the piston and pressure tube. This minimizes leak paths for a longer, more consistent, product life

2004-2007 Chevrolet Trailblazer [2004-2006 Chevrolet Trailblazer EXT] [2004-2007 GMC Envoy] [2004-2006 GMC Envoy XL] [2004-2005 GMC Envoy XUV]

[2004 Oldsmobile Bravada] [2004-2007 Buick Ranier] [2004-2007 Isuzu Ascender]

Detroit Axle Suspension Control Arms are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks and SUVs

4WD / AWD / 4X4 Models Only; EXCLUDES HD VERSIONS; Fits 6-LUG Models w/Torsion Bar Suspension; Pitman Arm is 4 GROOVE; Excludes Electronic Suspension or Z71

Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information

Kit Includes: 2x Front Upper Control Arms w/ Ball Joints + 4x Front & Rear Shock Absorbers + 2x Front Wheel Hubs & Bearings + 2x Front Lower Ball Joints + 2x Front Sway Bar Links + 4x Front Tie Rods + 1x Pitman Arm + 1x Front Steering Idler Arm + 1x Idler Arm Assembly

【Replacement Part Number】84176631 84977478 23464589 580-1108 580-1032 23151123 23312167 84061228 75-22345 75-877692B 17522345-101 17522345-102 17522345-103 17522345-104 23151115 23151116 23151117 23151118 23151119 23151120 23151121 23312152 23312153 23312155 23312156 23312158 22283444 22300918 23464582 23464583 23464585 23464586 23464587 23464588.

【Compatible Vehicle】This magnetic ride control shocks absorber compatible with Cadillac Escalade 2015-2021,Cadillac Escalade ESV 2015-2021,Chevrolet Silverado 2015-2021,Suburban 2015-2021,Tahoe 2015-2021,GMC Sierra 1500 2015-2021,Yukon 2015-2021, Yukon XL 2015-2021.

【High Performance】Magnetic drive control shock absorbers have huge advantages over hydraulic shock absorbers. This suspension system uses the same technology as the original GM shock absorber. The damping force is higher, the friction force is smaller, the fatigue performance is increased, and the rebound of impact is reduced, so as to achieve a longer service life.

Product type :AUTO PART

Package dimensions :5.8 cm L x16.8 cm W x22.4 cm H

country of origin :Canada

[Applicable Models]: The rear shock absorber fits for most of gas scooter electric bike minimoto dirt bike ATV quad mini pocket Bike.

[Easy to Install]: Please check the size specification of the rear shock before you place an order from us.

[Package List]: 1pc*rear shock damper+2 pairs*screws.

Compatible With BMW 3-Series RWD (E90/E92/E93) 2006 2007 2008 2009 2010 2011 2012 2013; Excludes M3

Spring Rate: Front - 8 kg/mm (448 lbs/inch) | Rear - 12 kg/mm (672 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | No, Reuse Factory Top Mount // Damping Levels: 32 Ways

Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way

APPLICABILITY: the coilover suspension struts fit for 2001-2005 BMW 320i /2000 BMW 323Ci /1998-2000 BMW 323i /2001-2005 BMW 325Ci /2001-2005 BMW 325i /2000 BMW 328Ci /1998-2000 BMW 328i /2001-2005 BMW 330Ci /2001-2005 BMW 330i (Sedan/Coupe Model ONLY Not for AWD and M3 Models). Professional installation recommended.

ADJUSTABLE PERFORMANCE: 2 piece front( 8kg/1), 2 pieces rear (6kg/1). The Coilover Struts is able to Independently adjust lower mount allows precise adjustment of the vehicle's height without affecting the stroke. You can according to personal needs to adjusted to personal satisfaction device within a certain range.

FUNCTION: Improve steering performance, prevent cornering understeer and oversteer, reduce cornering roll. Improve braking performance, reduce brake overshoot, shorten braking distance, improve driving safety. Easily installed using the right tools.

🍁COMPATIBLE MODELS - Suspension Parts for 2005 2006 2007 2008 2009 for Dodge Dakota 2006 2007 2008 2009 for Mitsubishi Raider

🍁REPLACE NUMBERS - 271100 344378 K750263 K80244

🍁HIGHLY PERFORMANCE - High-Quality auto parts with the best performance to provide a better ride and the most reasonable products

COMPATIBLE WITH 1986 - 2004 Dodge Dakota (2WD 4WD) and 1998 - 2003 Dodge Durango (2WD Only). *OEM Shocks Replacement for Lifted Applications.

TECHNICAL NOTES: Extended Length: 24.9 inches / Collapsed Length: 14.8 inches / Upper Mount: Loop / Lower Mount: Loop

MAX PERFORMANCE SHOCKS: Our own Supreme Suspensions branded line of shock absorbers was designed to better accommodate our lift kits, up to 3" from stock depending on application, and provide improved suspension travel and comfort.

FITMENT | Fits 2005-2023 Toyota Tacoma with 4-6" Lift

Fox Performace Series 2.0

Great on or off-road performance

Big handling improvements

Reasonable ride quality

Re-buildable for custom vehicle setups

Compatible With Scion iM (E186) 2015 2016 Toyota Corolla iM(E180) 2017 2018

Spring Rate: Front - 8 kg/mm (448 lbs/inch) | Rear - 5 kg/mm (280 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways

Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way

FITMENT | Fits 2003-2013 Dodge Ram 2500 / 3500 4WD Fits Diesel Engine Models with 6" Lift

6 inch lift kit

2003-2013 Dodge Ram 2500/3500 4WD

【Fitment】-- Compatible for 2005-2011 Nissan Pathfinder 4.0L 5.6L V6 V8 4WD RWD

【Replace Complete Strut Assembly NO#】-- Replace OEM 171103, 37274, 1214-0235, 181103, 9214-0125, 1225-0130, 844143820

【Features】-- Electrophoretic-coated increase performance of anti-corrosion and anti-oxidation. 100% quality inspection to ensure the high quality. Upgraded packaging with corrugated paper to avoid damage

【FITMENT】The Coilover Suspensions Kits fits for 2008 2009 2010 2011 2012 for Honda for Accord EX Coupe 2-Door/ EX Sedan 4-Door/ EX-L Coupe 2-Door/ EX-L Sedan 4-Door/ LX Sedan 4-Door/ LX-P Sedan 4-Door/ LX-S Coupe 2-Door, 2012 for Honda for Accord HFP Coupe 2-Door/ HFP Sedan 4-Door, 2008 for Honda for Accord LX Coupe 2-Door, 2011 2012 for Honda for Accord SE Sedan 4-Door

【SAFETY AND COMFORT】Easy to control, significantly improves stability when bumping or cornering, effectively dampens driving vibrations and improves ride comfort under difficult road conditions and heavy loads.

【FEATURE】 the Coilover Suspensions Strut’s height and camber plate Height adjustment includes adjusting tools Front struts: 8kg, Rear struts: 6kg

Brand New Bilstein Front Shock Absorber Kit, 1 Left and 1 Right (Bilstein Part #41-269282 & #41-269299).

Fits: Toyota: 2005-2015 Tacoma (Base 4WD, Pre Runner, TRD Pro), 0.5-2.5" Front Lift | 2016-2020 Tacoma (Limited, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport), 0.5-2.5" Front Lift

Bilstein B8 8112 (ZoneControl) CR suspension kits are a direct fit, position sensitive coilover designed for light trucks and SUV’s. ZoneControl CR is a revolutionary technology delivering position sensitive damping. The system incorporates a triple piston design, offering 3 stages of compression valving and 2 stages of rebound valving. The coilover module utilizes a threaded spring seat for ride height adjustability ranging from 0.5-2.5”.

【Fitment】:2017-UP Can-Am Maverick X3 72" Body

【Material】:Made of CNC billet aluminum construction. Finsh:Triple Chrome. Lifetime warranty.

【High Performance】:Increase your ground clearance and give you more room for large tires. 3 inch Full lift kit.Run up to 30" tire.

Fitment: Replacement for Taurus 2013 2014 2015 2016 2017. OE Number: 172653, 172654, 182654, 182653, 1333489R, 1333489L, DG1Z18124V, DG1Z18124T, 3333489L, 3333489R, PM7000467, PM7000468, 2701634948, 2701634949, 817135

Shorten Braking Distance: A new struts assembly helps maximize tire-to-road contact and distributes body weight evenly to each tire, which can shorten braking distances due to strut wear

Bounce Reduction: Damping rods reduce body vibration and bounce by generating resistance through the flow of fluid to absorb or slow down the direct impact of energy

For ATV---- Practical accessory fits for ATV Go-Kart Scooter 49cc .Designed from the factory for the shocks to be load-bearing, so these are a perfectly acceptable solution in that application.

Better ride---- Shock Damper Kit,Use this shock damper to give you better ride quality.Built to meet standard specification, strictly follow factory quality control.

Quality metal---- Quality metal shell and spring, making it has long service life, durable to use.Original standard, direct replacement for the old or broken one.

Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base

Includes 4 steel jacks and a 3/4" hex magnetic socket to raise/lower jack faster by power drill!

Complete installation kit included: 16 pcs 3/8" mounting screws & one matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!