Best Kunwu in 2026

Usually welding of similar steels, especially for welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications

Usually welding of similar steels, especially for welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications

10 pack of EWTh-2, 2% Thoriated (Red) Tungsten Electrodes for TIG Welding

Normally use for welding copper alloys, nickel alloys, titanium alloys, and stainless steel

All size of 6" (150mm) or 7" (175mm) in length and 0.04" (1.0mm), 1/16" (1.6mm), 3/32" (2.4mm) 1/8" (3.2mm) 5/32" (4.0mm) in Diameter

Low carbon (0.03 % maximum) in this filler metal reduces the possibility of intergranular chromium carbide precipitation and thereby increases the resistance to intergranular corrosion without the use of stabilizers such as niobium or titanium.

The 2.5 % molybdenum content of 316L gives the weld deposit excellent corrosion resistance at elevated temperatures against “pitting” that may be caused by sulfuric, phosphoric and acetic acids.

ER316L is usually used to 18% chromium – 12% nickel – 2.5% molybdenum austenitic stainless steels such as 316 and 317 but with a low ferrite, it can also be used for welding 304/304L to 316/316L stainless steels in cryogenic service at temperatures down to -452 ℉ (-269 ℃).

Real SUS304 Stainless steel, polished to a mirror sheen, corrosion resistant, dishwasher safe and easy to clean

Suitable for all dogs with fast eating habits, a pug, Terriers, Husky, Corgi, Akita, Alaskan Malamute, Saint Bernard, Shepherd, Poodle, Spotty, Labrador, etc..

Heavy duty and thick enough, durable, long lasting, never rust and will not be broken, ideal for all sizes of dogs

Occasionally used to weld Type 304 and similar base metals where severe corrosion conditions exist requiring higher alloy weld metal

Also used in dissimilar metal welds, welding of dissimilar steels or overlaying unalloyed structural steels

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Usually welding of similar steels, especially for welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications

Occasionally used to weld Type 304 and similar base metals where severe corrosion conditions exist requiring higher alloy weld metal

Also used in dissimilar metal welds, welding of dissimilar steels or overlaying unalloyed structural steels

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Usually welding of similar steels, especially for welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications

Welding of dissimilar steels or overlaying unalloyed structural steels

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Easily use in welding of kitchen, food equipment, furnace, motorbike and exhaust system

Usually welding of similar steels, especially for welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications

Usually welding of similar steels, especially for welding 19% chromium – 9% nickel austenitic stainless steels such as 304L, 308L as well as stabilized grades 321 and 347

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment, chemical tanks and general purpose applications where corrosion conditions are only a moderate concern, suitable for cryogenic applications

Welding of dissimilar steels or overlaying unalloyed structural steels

Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion

Easily use in welding of kitchen, food equipment, furnace, motorbike and exhaust system

Grade ER308L, Premium quality of stainless steel MIG welding wire 2-Lb spool

For single pass electrodes that have usability characteristics not covered by any presently defined classification

Conformed to Standards of AWS A5.9/ASME SFA A5.9/ER308L. Net weight of 2-lb ER308L stainless steel welding wire. The tensile strength, which is specified according to the requirements

Grade ER308L, Premium quality of stainless steel MIG welding wire 2-Lb spool

For single pass electrodes that have usability characteristics not covered by any presently defined classification

Conformed to Standards of AWS A5.9/ASME SFA A5.9/ER308L. Net weight of 2-lb ER308L stainless steel welding wire. The tensile strength, which is specified according to the requirements

【REINFORCED DOUBLE LAYER KEVLAER PADDING ON FINGER,PALM,ELBOW & BACK】:RAPICCA is the only brand which offer Double Reinforced Kevlar Layer Pading on both Fingers, Palms, Elbow& Backs on our welding gloves, this excellent design make RAPICCA welding gloves being the most extreme heat resistant gloves on the market.

【EXTREME FOUR LAYER HEAT RESISTANT PROTECTION】 Outermost layer: Double layer kevlar padding leather. Intermediate layer: a composite product by laminating a kind of high temperature resistant Air-isolated Aluminum Foil and a flame retardant cotton cloth . Inner layer:a 100% soft insulated cotton lining. Flame retardant thread stitching for advanced heat and cold resistance, sweat absorbent, breathable, allergy free. These gloves are guaranteed to withstand extreme temperatures up to 932°F(500℃)

【SUPERIOR SECURITY FOR FORERAMS】 - The 16 inches extra long glove with 7.5 inches long sleeve protect your forearms from grinding debris, welding sparks, hot coals and open flames, hot kitchen ware and hot steam. Effective even in extreme environments. Recommended for Stick welding (SMAW), Mig welding (GMAW), Flux-Core welding (FCAW), forging or other high temperature applications, Provide the most extreme heat protection.

Product 1: Used by professionals worldwide

Product 1: Tested for reliability and quality

Product 1: Made using the highest quality materials

Material: No Lead Brass

Color: Golden

Size : 1.984 mm(close to 2mm)/5/64 inch in Diameter 12 inch in Length

SMOOTH SURFACE:These brass rods have a smooth surface and are wrapped in professional metal wrapping paper. Even long-term storage, the brass rods are as bright as the new ones.

BRASS ROD SIZE: 30cm/12 inch in Length ,4.8 mm/3/16 inch in diameter

FEATURES: This solid brass rod is easy to cut, high strength, high hardness and corrosion resistance.

SMOOTH SURFACE:These brass rods have a smooth surface and are wrapped in professional metal wrapping paper. Even long-term storage, the brass rods are as bright as the new ones.

EXACT SIZE: 30cm/12 inch in length ，1/8 inch in diameter

FEATURES: The 1/8 brass round rod is a free cutting brass . It can be easily soldered and brazed and provides good resistance to corrosion.

Country of Origin:China

Package length:14.5"

Package width:4.25"

Premium quality ER308L stainless steel TIG welding rods; available diameters 0.045", 1/16", 3/32" and 1/8" with 36" length. Package of 1-Lb, 5-Lb and 10-Lb.

Specification: AWS A5.9/ASME SFA A5.9/ER308L; 36" (914mm) length of rod with single end stamped; typical deposited chemical composition %: C=0.02, Si=0.32, Mn=1.70, P=0.01, S=0.009, Cr=20.0, Ni=10, remain=Fe.

Features and Applications: filler metal for TIG welding (GTAW) process in stainless steel 304, 304L, 308, 308L, 321 and 347; with carbon content held to a max of .03% to reduce the possibility of intergranular carbide precipitation; most popular stainless wire for general-purpose applications where corrosion is moderate and applications at cryogenic temperatures; shielding gas required, usually 100% Argon.

HIGH-QUALITY CONSTRUCTION – Made with performance, medium action graphite and high-grade AAA cork grips. The cork grips have burled ends while the burl reel seats are double-locking, dyed to showcase this rod’s impressive wood graining.

DYNAMIC 4-PIECE ROD – Cork grips keep this rod lightweight, while copper anodized hardware keeps the rod finish sleek and durable from the reel seat to the tip top. This model comes with two rod tip sections, so you’ll always have a replacement handy.

PORTABLE CANVAS TUBE – This rod comes with a durable, hard canvas fly rod tube. Embroidered with the Moonshine logo, this tube protects your fly rod from bumps, dirt, water, mud, and more. The case’s sleek, compact design gives you the freedom to fly fish anywhere.

HIGH-QUALITY CONSTRUCTION – Made with performance, medium action graphite and high-grade AAA cork grips. The cork grips have burled ends while the burl reel seats are double-locking, dyed to showcase this rod’s impressive wood graining.

DYNAMIC 4-PIECE ROD – Cork grips keep this rod lightweight, while copper anodized hardware keeps the rod finish sleek and durable from the reel seat to the tip top. This model comes with two rod tip sections, so you’ll always have a replacement handy.

PORTABLE CANVAS TUBE – This rod comes with a durable, hard canvas fly rod tube. Embroidered with the Moonshine logo, this tube protects your fly rod from bumps, dirt, water, mud, and more. The case’s sleek, compact design gives you the freedom to fly fish anywhere.

HIGH-QUALITY CONSTRUCTION – Made with performance, medium action graphite and high-grade AAA cork grips. The cork grips have burled ends while the burl reel seats are double-locking, dyed to showcase this rod’s impressive wood graining.

DYNAMIC 4-PIECE ROD – Cork grips keep this rod lightweight, while copper anodized hardware keeps the rod finish sleek and durable from the reel seat to the tip top. This model comes with two rod tip sections, so you’ll always have a replacement handy.

PORTABLE CANVAS TUBE – This rod comes with a durable, hard canvas fly rod tube. Embroidered with the Moonshine logo, this tube protects your fly rod from bumps, dirt, water, mud, and more. The case’s sleek, compact design gives you the freedom to fly fish anywhere.

HIGH-QUALITY CONSTRUCTION – Made with performance, medium action graphite and high-grade AAA cork grips. The cork grips have burled ends while the burl reel seats are double-locking, dyed to showcase this rod’s impressive wood graining.

DYNAMIC 4-PIECE ROD – Cork grips keep this rod lightweight, while copper anodized hardware keeps the rod finish sleek and durable from the reel seat to the tip top. This model comes with two rod tip sections, so you’ll always have a replacement handy.

PORTABLE CANVAS TUBE – This rod comes with a durable, hard canvas fly rod tube. Embroidered with the Moonshine logo, this tube protects your fly rod from bumps, dirt, water, mud, and more. The case’s sleek, compact design gives you the freedom to fly fish anywhere.

HIGH-QUALITY CONSTRUCTION – Made with performance, medium action graphite and high-grade AAA cork grips. The cork grips have burled ends while the burl reel seats are double-locking, dyed to showcase this rod’s impressive wood graining.

DYNAMIC 4-PIECE ROD – Cork grips keep this rod lightweight, while copper anodized hardware keeps the rod finish sleek and durable from the reel seat to the tip top. This model comes with two rod tip sections, so you’ll always have a replacement handy.

PORTABLE CANVAS TUBE – This rod comes with a durable, hard canvas fly rod tube. Embroidered with the Moonshine logo, this tube protects your fly rod from bumps, dirt, water, mud, and more. The case’s sleek, compact design gives you the freedom to fly fish anywhere.

1/2 inch diameter x 12 inch length

Made of aluminum

Great for scratch builders, modelers, crafts, machine shops and architectural applications

Color: Golden

Package: 1PCS

Material: brass

Easy to machine, bend, plated, soldered and brazed and has high strength as well. Looks similar to gold when polished, non-sparking, and offers great corrosion resistance.

Applications nuts, bolts, dowels, rivets, valve stems, pump shafts, marine hardware, musical instruments, decorative purposes, fixtures and plumbing, models car ship/boat plane, locks, axels, harwares and other applications where low friction properties are needed.

Brass is a beautiful alloy and can be frequently found in a variety of home, commercial, and industrial applications. Brass can be endlessly recycled without degradation and is often an excellent substitute for copper.