Best Libertyyouxiangongsi in 2026

Product Name: Flange nut (fine teeth), for the fine flange nut, the fine nut has good retreat, suitable for anti-vibration, easy to adjust the gap, suitable for the place where the gap or torque should be adjusted.

Main color: silver tone; material: 304 stainless steel; Weight: 88 grams

Thread diameter: M10 / 0.39"; pitch: 1.25mm; please refer to the drawing for detailed dimensions.

Product name: stainless steel thickened 3-inch hinge (made of high-quality 304 stainless steel, with better anti-rust performance and long service life)

Easy to install: Install by screw, included here. Color: silver

Opening size: 75x 50 x 1.5mm / 2.95" x 1.97" x 0.06" (length * width * thickness); mounting hole diameter: 5.8mm; stainless steel screw size: M4x20 (thread diameter * length) detailed dimensions are shown in the figure

Product name: 1 inch stainless steel hinge (made of high-quality 304 stainless steel, with better anti-rust performance and longer service life)

Easy to install: install by screw, included here. Color: silver

Opening size: 26x 25 x 0.8mm / 1.02"x 0.98"x 0.03" (length * width * thickness); installation hole diameter: 4mm; please refer to the drawing for detailed dimensions

Product name: stainless steel 2-inch hinge (made of 304 stainless steel, good rust resistance and long service life)

Easy to install: Install by screw, included here. Color: silver

Opening size: 44x 32 x 0.9mm / 1.73‘’x 1.26’’x 0.035’’ (length * width * thickness); mounting hole diameter: 4mm; please refer to the drawing for detailed dimensions

Product name: stainless steel 3-inch hinge (made of high-quality 304 stainless steel, with better anti-rust performance and long service life)

Easy to install: Install by screw, included here. Color: silver

Opening size: 66x 37 x 1.0mm / 2.6" x 1.45" x 0.04" (length * width * thickness); installation hole diameter: 4.5mm; detailed dimensions please refer to the drawing

Product Name: Pneumatic Air PU Hose; Material: Polyurethane (PU)

Size: Diameter: 4mm / 0.157''; Wall thickness: 0.75mm / 0.029''; Total length: 5m / 196.85''; Working pressure: 0-1 Mpa145 psi; Maximum pressure: 1.5 Mpa / 217 psi / 15 bar. Burst pressure: 2.5Mpa (363Psi);

Working temperature of tubing: -4°F-176°F (-20°C--80°C); Tensile strength: 400kg/cm2; Wear resistance: 35mg; Oil resistance, non-corrosive; Color: black;

Product name: Flange nuts (fine teeth), used for thin flange nuts. The thin nuts have good retreatability, are suitable for anti-vibration, the gap is easy to adjust, and is suitable for places where the gap or torque needs to be adjusted.

Main color: silver tone; material: 304 stainless steel; weight: 60 grams

Thread diameter: M8 / 0.31 inch; pitch: 1.0mm; for detailed dimensions, please refer to the drawing.

☛Thread Size: M6(0.24"); Material: Stainless Steel

☛Product Name: Hex Flange Nut; Weight: 83g

☛Package Content: 26Pcs x Hex Flange Nut; Height: 6mm(0.24")

Package Included: 50 PCS M6 Serrated Flange Hex Locknuts

Thread Size: M6 or 6mm; Thread Pitch: 1.0mm

Flange Diameter (max): 14.2mm; Width across Flat Size: 9.78-10mm; Height of Nuts (max): 6mm;

Thread Size：#10-24; Thread Pitch: 24 TPI; Thread Type: Coarse Thread UNC

Hex Drive Size: 3/8 inch; Package Includes: 50 PCS

Made of 304 stainless steel 18-8 ( no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.

Metric or Imperial?: Metric

Thread Size: M6 (6mm)

Nut Width AF (F): 9.57mm

Product Name: Flange nut (fine teeth), for the fine flange nut, the fine nut has good retreat, suitable for anti-vibration, easy to adjust the gap, suitable for the place where the gap or torque should be adjusted.

Main color: silver tone; material: 304 stainless steel; Weight: 88 grams

Thread diameter: M10 / 0.39"; pitch: 1.25mm; please refer to the drawing for detailed dimensions.

Diameter: 14Mm

Material: Steel

Finish: Black phosphate

☛Product Name : Hex Flange Nut;Fastener Type : Hex Serrated Flange Nut;Thread Diameter : M8/ 5/16"； Included: M8 Hex Flange Nut 25pcs & Washer 25pcs & Spring Lock Washer 25pcs.Packing Quantity: 75pcs.

☛Thread Pitch : 1.25mm;Flange Diameter (d1) : 18mm/1";

☛Width Across Corner Size (e) : 14mm/ 9/16"

Standard: DIN 6923

Thread Size: M5-0.8; Thread Pitch: 0.8mm; Thread Type: Coarse Thread UNC

Hex Drive: 8mm; Package: 50 pcs

Flange Nuts are fasteners that look like a standard hex nut but the bottom has a widened circular flange or skirt that acts as a built-in washer and distributes the holding power of the nut evenly across the surface for a more secure fastening solution. These types of nuts are designed to remove the deficiencies commonly associated with the use of washers.

The serrations on the nut are meant to dig into the surface of the work to create a more secure connection that resists loosening which also makes it a popular choice with electronics fasteners as they are less prone to damaging fragile, soft metal surfaces as compared to a traditional nut.

M8 - M12 Diameter JIS (Japanese Industrial Standard) Flange nuts have smaller hex sizes than ISO and ANSI type bolts and are commonly used for import cars, auto repair, truck, car, and motorcycle frames, vehicle engines, transmission and exhaust. They are also mostly used for automotive and fastening applications such as steering and suspension parts, cylinder, and flywheels, and also for high strength mechanical applications and forged parts.

Flange Nuts are fasteners that look like a standard hex nut but the bottom has a widened circular flange or skirt that acts as a built-in washer and distributes the holding power of the nut evenly across the surface for a more secure fastening solution. These types of nuts are designed to remove the deficiencies commonly associated with the use of washers.

The serrations on the nut are meant to dig into the surface of the work to create a more secure connection that resists loosening which also makes it a popular choice with electronics fasteners as they are less prone to damaging fragile, soft metal surfaces as compared to a traditional nut.

M8 - M12 Diameter JIS (Japanese Industrial Standard) Flange nuts have smaller hex sizes than ISO and ANSI type bolts and are commonly used for import cars, auto repair, truck, car, and motorcycle frames, vehicle engines, transmission and exhaust. They are also mostly used for automotive and fastening applications such as steering and suspension parts, cylinder, and flywheels, and also for high strength mechanical applications and forged parts.

Nut Type: Hex serrated flange nut(Fine thread); Thread diameter: M10 / 0.39"; Pitch: 1.25mm; Hex width: 15 mm / 0.59"; Measuring system: metric.

Self-locking serrated flange digs into the material being fastened to help prevent loosening.

Made of high quality stainless steel 304, provides good strength and corrosion resistance in bad environments.

Nut Type: Hex serrated flange nut(Fine Pitch); Thread diameter: M12 / 0.47"; Pitch: 1.25mm; Hex width: 15 mm / 0.59"; Measuring system: metric.

Self-locking serrated flange digs into the material being fastened to help prevent loosening.

Made of high quality stainless steel 304, provides good strength and corrosion resistance in bad environments.

Product name: Flange nuts (fine teeth), used for thin flange nuts. The thin nuts have good retreatability, are suitable for anti-vibration, the gap is easy to adjust, and is suitable for places where the gap or torque needs to be adjusted.

Main color: silver tone; material: 304 stainless steel; weight: 60 grams

Thread diameter: M8 / 0.31 inch; pitch: 1.0mm; for detailed dimensions, please refer to the drawing.

12 Pcs 5/16" Thread x 5/8"L barrel length, plated steel

5/16" Hex drive bit required to secure

Open ended, full pass through

Diameter: 7/16"

Material: Steel

Finish: Yellow Zinc

➤[Package Includes]: You'll receive 15pcs M5 nylon insert flange lock nuts in total, which are important accessory in your daily, very practical for various use.

➤[High Quality Material]: Flange lock nuts are made of high quality 304 stainless steel, have good performance of rust, corrosion and chemical resistance. High hardness and good quality make it work well in indoor and outdoor environment, you can feel relieved to use our products.

➤[Nylon Insert Design]: Our flange lock nuts with nylon insert are able to prevent getting loose under vibrations and torque and protect nut threads from deformation. Flange design allows nut to insert larger holes than ordinary lock nuts.

Premium Quality: The Made of high quality stainless steel M3-M12 which offers a high level of chemical and corrosion resistance.

Hardwear Nut Type: Hex Serrated Flange Nut;

Size: M10 Pitch of thread is 1.25 mm. Inside Diamter 14.8mm, Outside Diameter 20.4mm.

Diameter: 3/8"

Material: Steel

Finish: Yellow Zinc

Flange Lock Nuts Are One Piece, All-Metal Prevailing Torque Hex Flange Nuts

The Protruding Circular Flange Increases The Nut'S Bearing Surface Allowing Them To Be Used With Irregular And Oversized Holes

Zinc-Plated For Moderate Corrosion Resistance

[DIMENSIONS] Type: serrated flange nuts; Standard: ANSIB18.2.2; Material: 18-8 (A2, 304) Stainless Steel; Dimensions: #8-32; Quantity: 50 pcs.

[MATERIAL] 100% Made of high quality 304 stainless steel (also known as 18-8 or A2 stainless steel), they have good corrosion resistance, rust resistance and high hardness, which provides a longer service life, can be used indoor and outdoor, even in humid environment.

[FEATURE] Flange works like a washer to distribute the load. Serrations can help grip the material surface and prevent the nuts from loosening due to vibration.