Best Luft Meistar in 2026

【Compatible Vehicle】This air suspension compatible with Infiniti QX56 2011-2013,For Infiniti QX80 2014-2023

【Replacement Part Number】Rear Left: 56211-1LA4A, E6211-1LA7B, E6211-6GW7B, E6211-6JS7A, E6211-1LA7A.Rear Right: 56210-1LA4A, E6210-1LA7B, E6210-6GW7B, E6210-6JS7A, E6210-1LA7A

【High Performance】According to the different road conditions and the signal from the distance sensor, the air suspension system will determine the height of the vehicle, and then control the air compressor and exhaust valve to automatically compress or extend the spring, thereby reducing or increasing the ground clearance of the chassis. In order to increase the stability of the high-speed vehicle body or the passability of complex road conditions.

Improved replacement - this window regulator and motor assembly features enhancements over the original design for greater reliability

Failure-resistant design - features cable tension springs to resist cable reel binding from insufficient tension

Simple replacement - no special tools are required to install this regulator assembly

Country of origin : United States

Package Dimensions: 68.58 H x 10.16 L x 10.16 W (centimetres)

Package Weight: 3.198 kilograms

Country of origin : United States

Package Dimensions: 67.792 H x 7.391 L x 7.797 W (centimetres)

Package Weight: 2.449 kilograms

Please check description for fitment details.

Brand New In Box

Representative Image Actual Product May Vary

Country of origin : United States

Package Dimensions : 26.8" L x 2.95" W x 2.95" H

Package weight : 5.64 pounds

DESIGNED FOR TRUCKS AND VANS -- Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling

BUILT TO LAST -- Heavy-duty nitrocarburized rod (non-shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

The highest quality replacement strut mount available

Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application

Superior rubber reduces noise, vibration and harshness

Country of origin : United States

Package Dimensions : 26.8" L x 2.95" W x 2.95" H

Package weight : 4.63 pounds

DESIGNED FOR TRUCKS AND VANS -- Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling

BUILT TO LAST -- Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction

Package Dimensions: 67.9 H x 7.6 L x 7.6 W (centimetres)

Package Weight: 2.436 kilograms

Fit type: Vehicle Specific

All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction

Hydraulic Lockout: Patented unique hydraulic lock-out isolates impact at the limits of suspension travel

High Pressure Nitrogen Gas Charged: High-pressure charge (240-260 PSI) provides a quicker response for excellent vehicle control

Includes front and rear 4600 Series Bilstein Shock Absorbers.

compatible with stock height 2001-2010 Silverado & Sierra 2500 HD 4WD.

Monotube gas pressure technology provides improved control and stability, precise handling, ultimate performance, and incredible comfort.

<br>Brand New Set of Bilstein 5100 Series Monotube Shock Absorbers, 2 Fronts and 2 Rear

<br>Fits: | * Chevy: | * Silverado 1500HD: | * 2001-2007 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, LS, and LT | * Excluding Quadrasteer | * Excluding ZX3 Electronic Suspension | * Silverado 2500: | * 1999-2005 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Cheyenne, Custom, LS, LT, and WT | * Excluding Quadrasteer | * Silverado 2500HD: | * 2001-2010 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, LS, LT, LTZ, and WT | * Silverado 3500: | * 2001-2007 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, LS, LT, and WT | * Silverado 3500HD: | * 2006-2010 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, LT, LTZ, and WT | * GMC: | * Sierra 1500HD: | * 2001-2007 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Classic, SLE, and SLT | * Excluding Quadrasteer | * Excluding ZX3 Electronic Suspension | * Sierra 2500: | * 1999-2004 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, SL, SLE, SLT, and WT | * Excluding Quadrasteer | * Sierra 2500HD: | * 2001-2010 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, SL, SLE, SLT, and WT | * Sierra 3500: | * 2001-2007 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including Base, Classic, SL, SLE, SLT, and WT | * Sierra 3500HD: | * 2007-2010 | * With 0" to 3" of Lift in the Front | * With 0" to 1.5" of Lift in the Rear | * Including SLE, SLT, and WT | * Bilstein's old part numbers on these shocks were F4-BE5-D146-H1 on the Fronts and F4-BE5-D147-H0 on the Rears

<br>Includes: | * 2 - Bilstein # 24-186735 Front Shocks, 46mm | * 2 - Bilstein # 24-186742 Rear Shocks, 46mm

Made in USA

Package Weight : 1.973 Kilograms

Package Dimensions : 26.8 L x 2.95 H x 2.95 W (inches)

Trustworthy replacement - engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles

Quality assured - extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life

Easy installation - reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information

Kit Includes: 2x Rear Shock Absorbers

Detroit Axle Suspension components are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs

Lids soft open gently, Ideal for supporting the lid to keep it open

Force: 18 Lbs(Per Strut), Length (Center-to-Center): 6.89 inch(175 mm), Compressed Length (Center-to-Center): 4.73 inch(120 mm)

Support opens lids to a maximum angle of 90 degrees. Available working temperature: -10℃~50℃/14℉-122℉

Maximum performance upgrade with up to 40% more damping performance than standard shock absorbers

Perfect solution when you need to upgrade suspension performance on your GM truck

Truck monotube design outperforms all other standard shock absorbers

#1 recommended Original Equipment replacement choice for Asian cars

Specifically calibrated to help restore the original handling and control characteristics of your Nissan

Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads; heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission; see owner's manual)

EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency

CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces

½ inch NPT Single Air Port

3/8-16 inch UNC Mounting Threads

600 PSI Maximum Restrained Pressure

Country of Origin : United States

Package Dimensions: 15.367 L x 67.614 H x 15.748 W (centimeters)

Fit type: Vehicle Specific

#1 recommended Original Equipment replacement choice for Asian cars

Specifically calibrated to help restore the original handling and control characteristics of your Honda Civic

Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life

The highest quality replacement strut mount available

Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application

Superior rubber reduces noise, vibration and harshness

Maximum performance upgrade with up to 40% more damping performance than standard shock absorbers

Perfect solution when you need to upgrade suspension performance on your GM truck

Truck monotube design outperforms all other standard shock absorbers