Best Lunyee in 2026

🛵High-quality materials - electric permanent magnet DC brush geared motor, aluminum body, full copper coil, heat resistance, natural air cooling, low noise, high quality, longer service life.

🛵Motor parameters: rated voltage—DC24V; no-load current—2A; rated current—12.5A; DC motor no-load speed—3850rpm; DC motor rated speed—3200rpm; transmission ratio—9.78:1; rated torque—1.11N.m; DC deceleration Actual motor speed: 330 rpm; driving speed—15.5(MI/h)

🛵Motor size: pitch: 12.7mm (1/2"); tooth thickness: 3mm; inner diameter: 11mm; outer diameter: 41mm; efficiency >78%; working direction: CW/CCW

【Laser Engraver Module】This laser module has a machine power of 120W and an output laser power of 20W. The 20W laser cutting module can cut through 8mm plywood and 12mm black acrylic with one pass. This laser module can engrave 304 stainless steel at a speed of 400mm/s with a focal length of 40mm. It has excellent compatibility with 3D printers, 3018 series CNC engraving machines, laser engraving machines, laser cutting machines, and CNC routers.

【Beam Compression Technology】The laser module adopts beam compression technology to reduce the focal area and improve resolution. Our engraving laser module uses high-quality original diodes with built-in FAC, which makes the beam size at the focus smaller, providing ultra-strong cutting penetration and accuracy. The power density is increased, and the engraving speed is correspondingly increased. At the same time, the accuracy is also increased.

【Professional Air Assist and Heat Dissipation Design】Using air-assist, the20W optical power laser module can make material edges cleaner and cut deeper when cutting. Air assistance can increase laser cutter efficiency to save time and enjoy concise beauty. The laser module has a built-in fan cooling system with a fan speed of 10000 rpm. Even after 30 minutes of 100% power output, the power decrease is only 300-400MW. Detachable eye protection cover can effectively filter blue light.

🛴【Technical specifications】🛴--10 inch wheel motor,rated voltage 60V,rated power(W) 3000W,Open size: 135mm,Hub motor weight: 7.5kg

🛴【High Speed】🛴--3000W powerful wide tyre wheel motors for faster speeds with a smooth ride,Max Speed：95-100Km/h

🛴【Powerful Hall Sensora】🛴--Electric Motor is equipped with powerful hall sensora which can be used as a electric scooter conversion motor motorcycle engine

🏍Wheel motors🏍：Voltage 48V，Power:  1500W，Shaft length: 160mm，Open Size: 145mm,Hub motor weight: 7.5kg

🏍Off-road essential🏍: wheel motor with geared tires, excellent grip performance, not easy to slip, not easy to idle,The disc brake suggest：140mm with 6 holes

🏍Excellent materials🏍:high quality stainless steel for wheels and INNOVA tires for long service life,Superior power and performance

HUB MOTOR:10 inch hub motor kit,rated voltage 60V,rated power(W) 3000W,Open size: 135mm,Hub motor weight: 12kg

HUB MOTOR:High-powered hub motor to give you faster speed, no-load speed up to 95-100km/h

HUB MOTOR:Complete wheel motor set, to meet all your needs for assembling electric bicycle, so you do not have to spend effort to buy additional accessories

Patented LED ring. Air flow - 40.6 CFM. Noise level - 24.0 decibels

Concentrated compression blades (CCB) is engineered to focus the inner weaker circle of Air outwards, allowing the outer section to pressurize and compress the Air.

Hydraulic Bearing/Low-Noise design lowers operating noise and improves efficiency. The Low-Noise cable can reduce the noise level by 24% from 24.6dBA to 18.7dBA.

Patented LED ring. Air flow - 40.6 CFM. Noise level - 24.0 decibels

Concentrated compression blades (CCB) is engineered to focus the inner weaker circle of Air outwards, allowing the outer section to pressurize and compress the Air.

Hydraulic Bearing/Low-Noise design lowers operating noise and improves efficiency. The Low-Noise cable can reduce the noise level by 24% from 24.6dBA to 18.7dBA.

Model Name:4 Pieces Synchronous Synchron Motor Turntable Motor Electric Cuptisserie Motor Cup Turner Motor Power: 4 watts; AC voltage range: 100-127 V; Frequency: 50/ 60 Hz; Rotating speed: 2.5-3 R per minute; Manner of working: CCW/ CW

Size: motor is 1.9 inch/ 4.8 cm in diameter, 1.57 inch/ 4 cm in height; Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length

Efficient synchronous motor: small power consumption and large torque

Model Name:4 Pieces Synchronous Synchron Motor Turntable Motor Electric Cuptisserie Motor Cup Turner Motor Power: 4 watts; AC voltage range: 100-127 V; Frequency: 50/ 60 Hz; Rotating speed: 5-6 R per minute; Manner of working: CCW/ CW

Size: motor is 1.9 inch/ 4.8 cm in diameter, 1.57 inch/ 4 cm in height; Cable is 0.08 inch/ 2 mm in diameter, 15.7 inch/ 40 cm in length

Efficient synchronous motor: small power consumption and large torque

Shaft 1/4" x 1"; Rotation = CCW; 3.3" Diameter Motor

Sheet metal = 8 15/16" x 8 15/16"; Wheel = 5.75" x 2"

2 Mounting Studs Opposite Shaft End

Bathroom exhaust fan replacement: 50CFM, 0.65 amps, 3000 Rpm, 120 volts, 60Hz

Shaft = 3/16" x 1 3/4", wire length = 6" with 2-prong plug

UL certified bathroom vent fan motor replacement kit: stable and durable

【 Product description】This universal bathroom exhaust fan motor and blower wheel eliminates bathroom odor, removes moisture from the air, and improves indoor air quality.

【 Package includes】1 motor & 1 fan. Motor is mechanically reversible - shipped ccw (counter clock wise) shaft end. Mounting studs, 1 7/8 inch on center

【Product specifications】0.65 amps, 3000 rpm, 120 volts 60hz, 50 cfm, continuous duty, air over. Shaft 1.75 inches long x 3/16 inches diameter, wire length = 6 inches with 2-prong plug

REPLACEMENT HOUSING: Fits NuTone 696N without "R0" number, 696N-R01, and 696N-R02, with housing size 8 inch. x 7-1/4 inch only - or units manufactured prior to the year 1999 (not compatible with models 696N, 696N-R01, 696N-R02 and 696N-R03 with housing size 7.25 in. x 7.5 in.)

DURABLE: Housing is constructed of durable PVC for lasting use

CONVENIENT: No drywall or duct work changes required with this replacement housing!

B2854 replaces old Century stock, B854

1-1/2 HP

230/115 volts

Rated Voltage: 13.5 VDC

3/8" shaft with 1 flat ("D" shaft) where flat to OD is 0.322" and the length of the shaft is 0.886" long

Rated Speed: 50 RPM

1/4 HP, 1625 RPM, 3.1 Amps, 115 V; 2-Speed; CW Lead End Rotation

Double Shaft: 5-3/4" x 1/2" x 5-3/4''; Sleeve Bearings

Bracket on motor bottom

Keep good air quality: Using our motor with fan on your RV, can effectively exhaust lingering smells in the bathroom and built-up moisture, provide a healthy environment for you!

Long lifespan: The fan blade made of durable plastic which can resist rust and corrosion, and last for a long time. And all our motor had been tested before you got it, we care a lot about your device safety. (Only for RV!)

Decide your rotation: The direction of spin is determined by looking down through the motor, at the top of the blade. and the vent fan motor has reverse polarity, which allows turning in both clockwise or counterclockwise. you can determine the direction yourself if it rotates in the wrong direction, just reverse the wires on the motor.

Variable 3-speed Ultra-Energy Efficient ECM

QuietCool Smart App Control

Up to 2,801 CFM on high at 148 Watts and Down to 1,337 CFM at 22 Watts

This is a TYC-50 AC 110V 28-33RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly. We promise we will tested ever motor before shipment.

【Specification】 Product Name:Synchronous Motor; Model:TYC-50; Shaft Diameter: 7mm ;Shaft Length: 16mm; Direction : CW/CCW(UNCONTROLLABLE); Voltage : AC 110V-130V; Speed : 28-33RPM; Power : 4W;Torque:≤1.1kgf.cm; Frequency : 50/ 60Hz;

【Application】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.

This is a TYC-50 AC 110V 2.5-3RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly. We promise we will tested ever motor before shipment.

【Specification】 Product Name:Synchronous Motor; Model:TYC-50; Shaft Diameter: 7mm ; Shaft Length: 16mm;Direction : CW/CCW(UNCONTROLLABLE); Voltage:AC 110V-130V;Speed:2.5-3RPM; Power : 4W; Torque:≤9.5kg.cm; Frequency : 50/ 60Hz;

【Application】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.

This is a TYC-50 AC 110V 0.8-1RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly. We promise we will tested ever motor before shipment.

【Specification】 Product Name : Synchronous Motor; Model : TYC-50; Shaft Diameter: 7mm ; Shaft Length: 16mm; Direction : CW/CCW(UNCONTROLLABLE); Voltage : AC 110V-130V; Speed : 0.8-1RPM;Power : 4W;Torque:≤14kg.cm; Frequency : 50/ 60Hz;

【Application】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.

This is a TYC-50 AC 110V 5-6RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is combination of metal/plastic to ensure the gear working continuously and quietly. We promise we will tested ever motor before shipment.

【Specification】 Product Name: Synchronous Motor; Model : TYC-50;Shaft Diameter: 7mm ; Shaft Length: 16mm； Direction : CW/CCW(UNCONTROLLABLE); Voltage : AC 110V-130V; Speed : 5-6RPM;Power : 4W;Torque:≤4.8kg.cm; Frequency :50/ 60Hz;

【Application】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue machines, electric ovens, rotating lamps, electric tables, electric models, electric advertising, electric shelves, dishwashers, control appliances , curtain machines, etc.

NEW 3.7HP COMPRESSOR DUTY MOTOR, SINGLE PHASE, 56 FRAME, 3450RPM, 5/8" SHAFT DIAMETER

IF THE MOTOR YOU ARE REPLACING SHOWS HP AS (5HP SPL) OR JUST (SPL) AND IS ALSO RATED BETWEEN 15-17 FULL LOAD AMPS AT 230V, THIS MOTOR WILL REPLACE YOURS

CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE

5HP SINGLE PHASE 208-230 VOLT COMPRESSOR DUTY ELECTRIC MOTOR

56HZ FRAME, 7/8" SHAFT DIAMETER, 3450 RPM, MADE IN USA BY BALDOR / ABB

__THIS MOTOR HAS A 1.15 SERVICE FACTOR AND IS USABLE AT 208V __

High-quality, super efficient replacement motor

Corrosion-resistant outer shell

Square flange design

1/3 HP, 115 Volts, 1675 RPM, 2 Speed, 3.4 Amps

Replaces Fasco D1092

Reference 7184-0156, 7184-0432, Coleman Part # 1468-306, 1468-3069, 7855MVA-A11U (8333 series). Note: we have reversed this motor in the past by removing the end bell opposite the lead end and reverse the rotor/shaft. BM = 3 1/2"; Bolt Pattern 4-1/2"

Top quality OEM replacement part

Insulation Class: B with auto reset O.L.

Rotation: CCW from lead end

Peel-and-stick gasket for mounting vacuum motors

Fits all motors with a 5. 7" diameter fan housing as used in many carpet extractor motors and other vacuum / blower motor applications

Ametek Lamb Motor Mounting Gasket for 5. 7 inch motors

Price For: Each Motor Shaft Design: Keyed Hz: 60 Motor Bearings: Ball Motor Shaft Rotation: CCWSE Phase: 1 Ins. Class: B Full Load Amps: 22.0 Motor Mounting Type: Rigid Base Shaft Length: 2-1/4" Max. Ambient Temp.: 40 Degrees C Capacitor Included: Yes Motor Application: Air Compressor Motor Enclosure Design: Open Dripproof Item: Air Compressor Motor

Nameplate RPM: 3450 HP: 5 Motor Thermal Protection: Manual Motor Design: Capacitor-Start/Run Shaft Dia.: 7/8" Duty: Continuous Voltage Compatibility: 115/208-230, 208-230, 208-240 Motor Service Factor: 1.15 Frame: 56Y Voltage: 208-230 Overall Length: 14-5/8" Country of Origin (subject to change): China

1/4 hp, 1100 RPM, 1.4 amps, 208-230V; 1-Speed

Rotation = CCW Shaft End; Shaft 1/2" x 1.5"; 40° Ambient Temp

TEAO; Sleeve Bearings; Body Diameter 5-5/8"