Best Mach5Ive in 2026

American Made. We strive to offer the highest quality product for the lowest possible price. Your satisfaction is our #1 priority! Keep your resin 3D printer free of dust, UV rays and moisture, with more pliable material! Flaps on all four sides allow easy access to printer controls and ports. Our elite resin 3D printer blackout cover protects from damage and helps contain stray resin fumes. Also acts as a thermal insulator. Click on our store link above for bundle deals!

USER-FRIENDLY & VERSATILE - Slipping our cover on is fast and effortless on your resin 3D printer or wash and cure machine. Flaps on all four sides allow easy access to printer controls and ports.

CLEAN UP ON YOUR OWN TIME - Now you're no longer forced to tidy up your printer right after a project. Use our elite 3D printer blackout cover to keep the device secure until you have time for cleaning.

SAVE YOUR SCREEN! The Mach5ive Screen Saver is your custom, clear screen protection solution for Elegoo Saturn & Saturn S. Protects your screen and printer internals from the damage that a resin spill can cause. Seals the gap between the screen and printer chassis. You must re-level your build plate per the instructions included after install. You may need to increase your exposure times, as the Screen Saver will allow greater than 93% of the light through.

SAVE TIME WITH PREP - Now you're no longer forced to tidy up your printer right after a print. Apply our Screen Saver and have peace-of-mind knowing that your printer internals and LCD are protected from resin leaks.

QUALITY PROTECTION – Why take the risk of damaging your printer internals, LCD or FEP film? Avoid expensive repairs by applying our Screen Saver and protecting your printer. Several sizes are available!

MACH5IVE ELITE BLACKOUT COVER - 9.5" x 9.5" x 16" - American Made. Your satisfaction is our #1 priority! Keep your resin 3D printer free of dust, UV rays and moisture, with more pliable material! Flaps on all four sides allow easy access to printer controls and ports. Our elite resin 3D printer blackout cover protects from damage and helps contain stray resin fumes. Also acts as a thermal insulator, keeping heat in during printing.

MACH5IVE SCREEN SAVER [3-PACK, Mars 3] - The Mach5ive Screen Saver is your clear screen protection solution. Protects your screen and printer internals from the damage that a resin spill can cause. Seals the gap between the screen and printer chassis, keeping spilled resin on the outside of your printer.

PROTECT YOUR INVESTMENT - Completely protect your printer inside and out from moisture, dust, and curious pets, toddlers & resin spills!

MACH5IVE ELITE BLACKOUT COVER - 9.5" x 9.5" x 16" - American Made. Your satisfaction is our #1 priority! Keep your resin 3D printer free of dust, UV rays and moisture, with more pliable material! Flaps on all four sides allow easy access to printer controls and ports. Our elite resin 3D printer blackout cover protects from damage and helps contain stray resin fumes. Also acts as a thermal insulator, keeping heat in during printing.

MACH5IVE SCREEN SAVER [3-PACK, 5.5" & 6.x" Screens] - No need for a gasket! The Mach5ive Screen Saver is your clear screen protection solution. Protects your screen and printer internals from the damage that a resin spill can cause. Seals the gap between the screen and printer chassis, keeping spilled resin on the outside of your printer. Not compatible with Sonic Mini.

PROTECT YOUR INVESTMENT - Completely protect your printer inside and out from moisture, dust, and curious pets, toddlers & resin spills!

MACH5IVE ELITE BLACKOUT COVER - 12" x 12" x 18" - American Made. Your satisfaction is our #1 priority! Keep your resin 3D printer free of dust, UV rays and moisture, with more pliable material! Flaps on all four sides allow easy access to printer controls and ports. Our elite resin 3D printer blackout cover protects from damage and helps contain stray resin fumes. Also acts as a thermal insulator, keeping heat in during printing.

MACH5IVE SCREEN SAVER [3-PACK, Mono X / 6K & Photon M3 Plus] - The Mach5ive Screen Saver is your clear screen protection solution. Protects your screen and printer internals from the damage that a resin spill can cause. Seals the gap between the screen and printer chassis, keeping spilled resin on the outside of your printer.

PROTECT YOUR INVESTMENT - Completely protect your printer inside and out from moisture, dust, and curious pets, toddlers & resin spills!

GLOW MULTICOLOR CHANGE - Every 10 Meters color change with Green,Blue,Purple and Pink. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament

UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding

HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm

3D printer filament (1.75mm diameter, red; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)

Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish

Engineered to reduce jamming

Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly

2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs

Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow

Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.

Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.

Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.

Compatible with ELEGOO Mars 3 and Mars 3 Pro Resin 3D printer.

Film dimensions: 146*195mm, Film thickness: 0.127mm. Note:Please remove the double-sided protective film before use.

Compared with FEP release film, PFA release liner film has higher temperature resistance and printing success rate, and less release tension for easier to remove models.

GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!

Anti-Static, Non-Magnetic CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material

10 pcs of 0.40mm diameter FLEXIBLE stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears

Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying

Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them

Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.

Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors.

Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying.

Used for heated bed or hot end.

The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. NOTE: It can't be used to cure liquid resin directly and can't cure filament prints.

The 360° rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can't use batteries for power.Maximum display /rotate weighing less than 500g/1.1Pound which is also suggested size that the light can cure. TIPS: Close to light will help to speed up and rotate heavier.

The resin can be cured in 10-15 seconds from a distance of 5 cm from the light. NOTICE: thicker parts require more time to cure. What's more the dimension of the UV light is 3.35*4.53*3.74" and the turntable diameter is 3.5".

100% Creality Original--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Very easy to take off the models, NO tools to remove models

Use clips to fix the glass plate on the hot bed.

Higher temperature higher sticky. The models will stick on bed firmly when temperature is high

Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.

High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.

0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.

【300°High-temp Nozzle】Upgraded brass nozzle can stand up to 300°printing temperature and it is compatible with multiple filaments such as PLA, ABS, PVA, Wood, TPU, PRTG and PA which providing more possibilities for creation.

【Sprite Dual-Gear Direct Drive Extruder】Compatible with more filaments, Ender 3 S1 Pro 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

【4.3 inch Touch Screen】The 4.3-inch touch screen supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes.

THERMAL DYNAMIC COATING - Based on science, works like magic; Parts stick at hot and release when cooled; Dries fast and non tacky so it won't clog your nozzle with goo

LONG LASTING - Print several times on a single coating; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print

LOW ODOR & WATER SOLUBLE - No harsh smells; No headaches; Easy to touch up or remove with water

Sufficient content: this package contains 15 pieces extruder wheels in a pack, sufficient quantity to satisfy your various demands and replacements

Check the dimension: each 36 teeth gear measures approx. 11 x 11 mm/ 0.43 x 0.43 inch (L x W), its inner diameter is approx. 5 mm/ 0.2 inch, 36 teeth, fit for most standard 3D printers; Please check whether the size is suitable for your needs before purchasing

Practical function: our 3D printer parts can replace your broken one and make your printer work more efficiently, improve the performance and reliability for your 3D printers

42-40 motor for the e-axis of the printer of the Creality Ender series and the CR series, like Ender3 / 3pro / 5 / 5pro / 5plus; CR10 / 10MINI / 10SProV2 / 10S4 / 10S5 / 10MAX / 10V2 / 10V3; The motor 42-40 also fits the Y-axis of Ender5 / 5pro / CR-10V2 / CR-10SProV2.

1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.

Shaft diameter: 5mm （D-shape）

American Made. We strive to offer the highest quality product for the lowest possible price. Your satisfaction is our #1 priority! Keep your resin 3D printer free of dust, UV rays and moisture, with more pliable material! Flaps on all four sides allow easy access to printer controls and ports. Our elite resin 3D printer blackout cover protects from damage and helps contain stray resin fumes. Also acts as a thermal insulator. Click on our store link above for bundle deals!

USER-FRIENDLY & VERSATILE - Slipping our cover on is fast and effortless on your resin 3D printer or wash and cure machine. Flaps on all four sides allow easy access to printer controls and ports.

CLEAN UP ON YOUR OWN TIME - Now you're no longer forced to tidy up your printer right after a project. Use our elite 3D printer blackout cover to keep the device secure until you have time for cleaning.

3D printer filament with 1.75mm diameter + / - .05mm; designed to fit most common 3D printers (check spool size for compatibility); ideal for printing small parts, phone cases, watch bands, and more; Black; 1 kg spool

Made of strong yet flexible thermoplastic polyurethane (TPU), which is easy to use and offers excellent layer-to-layer bonding; resists oil, grease, and scratches; holds up well to more rigorous wear and tear

Spool’s built-in gauge shows percentage of material remaining and approximate length remaining

Compatible: The stepper motor 42-40 applies to Eixe series Ender and CR-10 (e.g. Ender-3 / Ender 3 Pro / CR 10 / CR 10S etc.).

1.8 degree step angle, 0.4 N.M holding torque, with 0.8 A rated current per phase.

High Quality Stepping Motor: The high quality motor with low power, smooth speed, stable performance, low noise and no loss during operation, which ensures the stable operation of the extrusion mechanism.

🎈【Quality Assurance】100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.

🎈【Work Better】Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.

🎈【Improved Performance】The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.

NO EDGE CURLING - Ender 3 pro glass bed with the composite coating. The models will stick on the bed firmly without glue, avoiding the issue of the print's edges curling. Equipped with 4 clips to fix the hotbed.

LONG DURABILITY - Inorganic coating, high hardness of 8 Mohs, avoiding the deformation of the ordinary aluminum heat bed after long-term use.Undiminished performance after repeated use, no need for frequent replacement.

EXTRA GLASS CLIPS - Use clips to fix the glass plate on the hot bed

UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.

STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.

EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.

Creality 3D Printer Original Stepper Motor 42-40/1pcs and 42-34/1pcs 2 Phase 0.8A 1.8 Degree 0.4N.M for 3D Printer DIY CNC Accessory Replacement

Lower noise, strong torque, stable property and high accuracy.

 42-34 Stepper motor apply for 3D printer (like CR-10 Series Z axis or Ender-3 X/Y/Z axis), machinery and equipment. 42-40 stepper motor apply for Ender and CR-10 series E aixs.

The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.

The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.

Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃