Best Creality 3D 3D Printer Parts Accessories in 2026

Compatible with ELEGOO Mars 3 and Mars 3 Pro Resin 3D printer.

Film dimensions: 146*195mm, Film thickness: 0.127mm. Note:Please remove the double-sided protective film before use.

Compared with FEP release film, PFA release liner film has higher temperature resistance and printing success rate, and less release tension for easier to remove models.

GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!

Anti-Static, Non-Magnetic CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material

10 pcs of 0.40mm diameter FLEXIBLE stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears

Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying

Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them

Sufficient content: this package contains 15 pieces extruder wheels in a pack, sufficient quantity to satisfy your various demands and replacements

Check the dimension: each 36 teeth gear measures approx. 11 x 11 mm/ 0.43 x 0.43 inch (L x W), its inner diameter is approx. 5 mm/ 0.2 inch, 36 teeth, fit for most standard 3D printers; Please check whether the size is suitable for your needs before purchasing

Practical function: our 3D printer parts can replace your broken one and make your printer work more efficiently, improve the performance and reliability for your 3D printers

🎈【Quality Assurance】100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.

🎈【Work Better】Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.

🎈【Improved Performance】The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.

The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.

The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.

Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃

Odor Control: Activated carbon can absorb and filter the irritant resin odor before they are ventilated throughout the cooling fan at a super adsorption rate, which gives you fresh and safe user experience.

Replaceable Carbon Filter: It comes with one activated carbon block which can be used for 3 to 6 months. The carbon can be replaced and need to be purchased separately.

Long Endurance：With the 2000mAh battery, it can work continuously for at least 24H once fully charged via the power adapter included.

▶ Direct Water Cleaning – Running tap water and a paint brush is all you need to effortlessly clean the parts. Please cure the used water with sunlight and strain the waste before dumping. DO NOT dump the used water directly

▶ Unique Formula for Fast Curing – After many times adjustments, ELEGOO uv resin has a higher liquidity than other, which makes the print cured quickly and well, and has a good tenacity

▶ Fine Details and Amazing Colour – ELEGOO 3d resin holds details fantastically, from large flat surfaces to tiny detail, meanwhile, the colour is also amazing. Quality of prints are exceptional

[UPGRADING]: Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable.

[REPLACEMENT]: MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.

[Easy TO USE]:for 1.75mm filament of 3D printer MK8 bowden extruder frame

Creality Upgrade Heater Block Silicone Cover Instead of Heat Insulation Cotton

Non-stick silicone material made

Keep the hotend temperature extremely stable.

This toothbrush is made of copper wire and is specially designed for cleaning the hot bed of 3D printer nozzles.

To clean the nozzle, heat the nozzle to 190°C.

Note: The copper wire toothbrush may be deformed during transport, but this will not affect its use. This is a handy tool.

Durable and Virtually: Adopt high quality aluminum, Excellently machined, Finished smoothly and high accuracy positioning.

Size: 20T 6mm bore Aluminum GT2 6mm Timing Belt Pulley.

Package Inclued: 5pcs × 2GT 20T Bore 6mm Timing Pulley + 1 xM4 Allen Key.

Brand new cr-10 upgrades 3d printer parts supporting rod set and high quality 3d accessories of Creality original. This kit is an all metal construction including the L brackets very strong. It's a great product and does what it's supposed to add rigidity to your printer.

Designed for upgrading 3D Printer CR-10 300 and CR-10S 300 reduces the vibration made by printing, supporting rod kit makes 3d printing more stable.

Durable and well appointed, package included all the necessary parts for supporting rod set, this frame support kit will satisfy your requirement to upgrade the old machine.

Compatibility: fit for most of the sizes 3D Printer extruder nozzles, such as MakerBot, RepRap, Creality CR-10, Ender 3, Prusa I3, Anet A8, E3D, MK8, MK10, etc.

Package Included: 2 Pcs 0.15 mm, 2 Pcs 0.25 mm, 5 Pcs 0.35mm, 5 Pcs 0.4 mm, 2 Pcs 0.5mm cleaning needles, total 16Pcs 3D printer nozzle cleaning needles in a bottle and 2 Pcs tweezers with straight and curved shape tip.

Material: the needles and tweezers are made of high-quality stainless steel material. The needles are sturdy, durable, and flexible, easy to bend but not broken. The tweezers tip are sharp, non-slip, anti-static, non-magnetic, easy handling control.

Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use for cleaning other small parts, such as throat and feeder gear

Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist

Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap

【Stainless nozzle cleaning needles 0.4mm 】This nozzle cleaning needles is made of stainless steel material, which is also flexible not easy to break , enough for a long time using. Note: Do not use too much force, it is easy to hurt yourself

【Two different Length 3D Printer Nozzle Cleaning Kit】We kindly prepared two types cleaning needles to meet your needs . The 105mm needles can clean the nozzles as well as other small parts, such as throat directly .The 70mm needs is mainly for nozzles cleaning , due to its shortness , which is more tougher and harder . Suggestion:Heat the nozzle to 200 ℃ or more before cleaning with a needle!

【Twist Handle and Sharp Needle Tip Design】The needle has a sharp to clean 0.4mm hotend nozzle, with a special handle you can easily twist it in during use. Note: Be careful your hands when usintg this 0.4mm Needles Cleaner

【Increased Accuracy】Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.

【Stable Performance】 Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.

【Smooth Running】 Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.

Ender 3 stepper motor cable, Compatible with Ender 3 / Ender 3 Pro/Ender 3X Printer Limit Switch

cable length：X Axis:790mm，Y Axis:400mm，Z Axis:300mm

One-piece plug design, easy to install, hard to snap, convenient to plug or release.

It is suitable for ender-3 ender -3s or CR-10 CR-10S printer use , and also suitable for other printers which also use 5mm bore and 20T GT2 pulleys

This pulley is used for 6mm width Gt2 belt

Package: 5pcs pulleys

Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY

MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS

CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE

Module Size: 27mm/1.06in x 15mm/0.59in; Cable Length: 100mm/3.94in; Weight: 5g

Package Included: 1pcs stepper motor parallel modules with 1pcs 100mm cables, easy to connect.

Application: special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.

Original Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, it is stable and durable.

MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.

Full Metal Aluminum Alloy

Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W

Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S

Hot Bed Size:310x310x3mm，Hotbed With Cable Which be Installed Well.

These are fixed bed brackets for the CR-10, Ender 3. They should replace the springs under the heating bed. Two firmware are required.

The new Ender 3 contains the spacers so you don't have to print the required parts. You only need to adjust the height of the limit switch module. If your printer is a CR-10 or Ender 3 old part, you need to print the required parts, reference files in thingiverse, keywords: CR-10 Solid Bed Mount.

The model is 3 high (18 mm) and 1 short (16 mm), black. (Print firmware not included). Please note: Before installation, you need to print two firmware (search for "3742788" in Thingiverse). An automatic level sensor is required. Please refer to the picture.

⭐Not Easy to Lose Step: The extruder adopts a double-gear double pneumatic joint extrusion structure, which makes the extrusion pressure greater, ensuring smooth feeding and not easy to lose step.

⭐High-quality Material: The product material adopts brand-new imported aviation aluminum material, and is processed by CNC imported from Japan.

⭐Widly Application: Not only suitable for CR10S PRO original machine, CR-10S PRO's original aluminum alloy driver, but also can be installed in Ender-3, Ender 3pro, Ender 5 and so on.

[DURABLE MATERIAL] --- The drill cleaning parts are made of high quality stainless steel material, good flexibility, not easy to break, longer service life, the use of new technology research and development, not easy to break through, durable and reliable. It comes with a handle, so you can easily twist it in during use

[PREMIUM PERFORMANCE] --- The excellent quality of the micro cleaning bit will clean your printer nozzle very well, making the 3D printer print better and cleaner. Affordable and practical solution to blocked nozzles due to dried ABS/PLA filament

[MULTI COMPATIBILITY] --- The 3D printer Matches all 3D print extruder nozzles offered from E3D hotend, MK8 or MK10 hot end Makerbot RepRap, etc. Compatible with most well known 3D Printers on the market, Such as Duplicator, MakerBot, RepRap and so on

Temperature sensor 100KΩ accuracy of ± 1%

Wiring length: 1 meter

Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer; NTC connector with terminal, easy to intall

Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking

Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly

🎅【Upgrade Aquila S2】Pre-Installed Leveling Assembly and Hardened Steel Nozzle, this Aquila S2 3D printer kit is equipped with all necessary parts of the fdm printer, which can save you time and money. （Extra high temperature brass nozzle 2pcs give as a present）

🎅【Spring Steel PEI Magnetic Build Plate】:Aquila S2 has used the spring steel PEI magnetic build plate, which has good adhesion to the printed model and enables fast heating up of the heat bed. The build plates is not only durable but also flexible. Once the printing completes, users can remove the printed model effortlessly with just a slight bend.

🎅【300°C High-temp Direct Extruder】The brand new nozzle made of brass can stand up to 300°C printing temperature, and it is compatible with multiple filaments, such as PLA, ABS, TPU, PETG, providing more possibilities for creation.

EASY REMOVAL OF PRINTS: CR-10 upgrade parts, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.

SIZE: 300x300mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds.

DURABILITY & EASY CLEAN: CR-10 bed surface is capable to work at 70ºC. Easy clean with alcohol.