Best Creality 3D 3D Printer Parts Accessories in 2026

🎈【Quality Assurance】100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.

🎈【Work Better】Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.

🎈【Improved Performance】The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.

UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.

STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.

EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.

The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.

The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.

Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃

[UPGRADING]: Original Aluminum Drive Feed for Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5, it is stable and durable.

[REPLACEMENT]: MK8 extruder drive feed kit, can replace acrylic parts of Creality Ender 3/3Pro CR-10, CR-10 S4, CR-10 S5.

[Easy TO USE]:for 1.75mm filament of 3D printer MK8 bowden extruder frame

ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.

EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.

CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.

Creality Upgrade Heater Block Silicone Cover Instead of Heat Insulation Cotton

Non-stick silicone material made

Keep the hotend temperature extremely stable.

UPGRADED METAL EXTRUDER: Now without the pneumatic connector and the small gaps created inside, now you can print flexible, TPU, without a hitch!

ADVANTAGES, our extruder drive is you have stronger pressure on the gear arm for the filament into the printer nozzle resulting in less filament slip and accurate extrusion. Also, the spring tension on our new extruder is adjustable, by turning a small hex nut it will put more pressure so versatile for all kinds of filaments.

Compatible with virtually all Creality 3D Printer: Ender 3, Ender 3 Pro, Ender 3 X, Ender 3 V2, Ender 3 Pro X, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. This upgrade kit is also compatible with other 3D printers except the printers using a direct drive setup.

【Increased Accuracy】Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.

【Stable Performance】 Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.

【Smooth Running】 Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.

Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY

MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS

CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE

Original Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5, it is stable and durable.

MK8 extruder drive feed kit, can replace acrylic parts of CR-10, CR-10 S4, CR-10 S5.

Full Metal Aluminum Alloy

Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W

Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S

Hot Bed Size:310x310x3mm，Hotbed With Cable Which be Installed Well.

Ender 3 Rubber belt

belt for ender-3 X axis Y axis

timing belts

Super Large Washing and Curing Size: Creality upgraded 10.1 inch washing and curing machine for 3d resin printer has a large washing/curing space, the maximum processing size can reach up to 9.5x6.3x7.9 inch/240x160x200mm, which is much larger than the other products. It can meet your processing needs of larger printing models.

Washing and Curing 2 in 1: The 2 in 1 design enables the washing and curing of 3D printing models in one machine. UW-02 is a professional solution that can save you time and make washing and curing more efficient. It has two speeds- Fast/Medium, and the time of 2-30min can be adjusted freely. The three sensitive touch buttons with high-definition LCD display is simple and convenient.

Multiple Washing Methods: The washing and curing station has two washing methods: 1. Basket Type Cleaning- Remove the model and put it in the basket for direct cleaning; 2. Platform Suspension Cleaning- Directly hung on the platform frame to reduce contact with resin. The large magnetic fan blades enable a super large vortex and high speed washing which can powerfully remove excess resin on the surface of the models.