Best 3Degos in 2026

UPGRADED METAL EXTRUDER: Now without the pneumatic connector and the small gaps created inside, now you can print flexible, TPU, without a hitch!

ADVANTAGES, our extruder drive is you have stronger pressure on the gear arm for the filament into the printer nozzle resulting in less filament slip and accurate extrusion. Also, the spring tension on our new extruder is adjustable, by turning a small hex nut it will put more pressure so versatile for all kinds of filaments.

Compatible with virtually all Creality 3D Printer: Ender 3, Ender 3 Pro, Ender 3 X, Ender 3 V2, Ender 3 Pro X, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. This upgrade kit is also compatible with other 3D printers except the printers using a direct drive setup.

A full seven pieces dice set with necromancer death skull themed with skull and grass inside the dice. The individual piece has been crafted and inks with absolute precision to ensure each and every dice is the best.

A dice for a the necromancer that is set to destroy the world or rule the deaths

Can be used with any dice tower, dice tray, dice bag, and dice box. With a special resin that is more resilient to scratches than most other dice.

New Creality 3D printer Self Realising Glass Bed - Using a special microporous coating help release prints when the build plate cools, and there is no need to hack at it with the scrapper!

Prints stick firmly to the bed without any glue or hairspray. Just heat the bed to the temp you usually print PLA, PETG, or ABS, and the print will stick.

Save time and hassle of wiping the build plate of glue, unlike normal Borosilicate Glass. The perfect 3d printers accessories for all Creality printers: Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, and CR-20, CR-20 Pro, or any other printers with a bed size of 235mm by 235mm.

A full seven pieces dice set with necromancer death skull themed with skull and grass inside the dice. The individual piece has been crafted and inks with absolute precision to ensure each and every dice is the best.

A dice for a the necromancer that is set to destroy the world or rule the deaths

Can be used with any dice tower, dice tray, dice bag, and dice box. With a special resin that is more resilient to scratches than most other dice.

A full seven pieces RPG metal dice set to be used for Dungeons and Dragons. The individual piece has been crafted and inks with absolute precision to ensure each and every dice is the best.

A set made for the special character that you have in mind.

Can be used with any dice tower, dice tray, dice bag, and dice box, our metal dice are coated with a protective layer to prevent scratches and discoloration.

3D printer filament (1.75mm diameter, red; 1 kg spool); designed to fit most common 3D printers (check spool size for compatibility)

Made of PLA, a commonly used thermoplastic material known for its lower melting temperature and ease of use (no heated bed required), plus it’s low-warp, odorless, and offers a glossy-type finish

Engineered to reduce jamming

Compatible with ELEGOO Mars 3 and Mars 3 Pro Resin 3D printer.

Film dimensions: 146*195mm, Film thickness: 0.127mm. Note:Please remove the double-sided protective film before use.

Compared with FEP release film, PFA release liner film has higher temperature resistance and printing success rate, and less release tension for easier to remove models.

Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly

2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs

Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow

GREAT VALUE: sharp quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!

Anti-Static, Non-Magnetic CURVED PRECISION TWEEZERS; 3D printing tweezers great for nozzle maintenance and cleaning excess support material

10 pcs of 0.40mm diameter FLEXIBLE stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears

Durable, rigid construction; Solid rivets keep the blades in place, no more repurposed artist palette spatulas with spinning, twisting and turning cramp rings!

Long knife with a beveled front edge; Slides very gently underneath prints with ease to protect the build bed surface yet provides good reach and allows prying

Stiff, hardened stainless steel blades; Flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them

Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm; a set of 25pcs printer nozzles and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle.

Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs. Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother.

The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. NOTE: It can't be used to cure liquid resin directly and can't cure filament prints.

The 360° rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can't use batteries for power.Maximum display /rotate weighing less than 500g/1.1Pound which is also suggested size that the light can cure. TIPS: Close to light will help to speed up and rotate heavier.

The resin can be cured in 10-15 seconds from a distance of 5 cm from the light. NOTICE: thicker parts require more time to cure. What's more the dimension of the UV light is 3.35*4.53*3.74" and the turntable diameter is 3.5".

Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Parameter: 25pcs MK8 Brass nozzles, Input diameter 2.00mm, output diameter 0.4mm, screw thread: M6, hexagon diameter: 6 mm.

Applicability and Compatibility: MK8 extruder nozzles fit for 3D Printer Creality ender 3 ender 3 pro ender 5 cr-10 and so on, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

Professional: We always put the quality of our products first! High quality brass and rigorous workmanship give you a smooth and high resolution 3D printing experience.

Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.

Fit for Ender 3/Ender 3 Pro/Ender 3S / Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo /Ender 3 Max/CR-6 SE/CR 20/CR 20 Pro.

Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.

UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit.

STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder.

EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.

🎈【Quality Assurance】100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.

🎈【Work Better】Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.

🎈【Improved Performance】The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.

Original resin tank used for ELEGOO MARS 3 PRO resin 3D printer, and the PFA release liner is pre-installed.

Made of aluminum alloy, chemical corrosion resistance, not easy to deform, and durable for long-term usage, you don't need to worry about changing your resin vat frequently.

The metal resin vat with screws to fix it in place, and the feet on the bottom to keep the PFA release liner from making contact with your workbench.

WORKS ON MULTIPLE FILAMENTS: works great for ABS, PLA, PETG, HIPS, and TPU

WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton

EASY USE: applying Magigoo is as easy as child's play. Shake, press, apply to an active printing area. Magigoo welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo is easily cleaned with water

【Quality Assurance】MK8 nozzles are made of high-quality brass material. Heavy duty and provide a long service life. Easy to install and change.

【Precise Design】3d printer nozzles can prevent the print head leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer. Easy to identify with engraving the size on each nozzle.

【Applicability and Compatibility】MK8 extruder nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible with all 1.75mm PLA ABS 3D printers. Fit exactly like the original.

Made of high quality materials, non-toxic, tasteless and easy to use.

Suitable for 3D printer and engraving machine screw, optical axis, guide rail, and other transmission systems.

Anti-rust, smooth function. Silent work, protection for 3D printer.

【Package include】: Total 40Pcs printer nozzles for 3D printer; 10Pcs 0.4mm nozzles, 5 Pcs nozzles for each size 0.2mm 0.3mm 0.5mm 0.6mm 0.8mm 1.0mm

【Printer Nozzle Parameter】: Input diameter: 1.75mm, Nozzle precision: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm, Screw thread: M6, Easy to find your need

【Durable Material】: Ender 3 printer nozzles are made of premium brass material, sturdy and durable; Fit to most non-abrasive materials such as PLA, ABS, Nylon, TPE

PC4-M6 Fittings：thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm

PC4-01 Fittings：thread about 1/8, The upper parts can be inserted into 4MM pipe and self locking,the lower screw thread is 1/8 teeth

PC4-01 Fittings:Silver; PC4-M6 Fittings; Gold

100% Creality Original--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change.

Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle.

Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.

【300°High-temp Nozzle】Upgraded brass nozzle can stand up to 300°printing temperature and it is compatible with multiple filaments such as PLA, ABS, PVA, Wood, TPU, PRTG and PA which providing more possibilities for creation.

【Sprite Dual-Gear Direct Drive Extruder】Compatible with more filaments, Ender 3 S1 Pro 3d printer can print PLA, TPU, PETG, ABS.etc. It is more lighter and features less inertia and more precise positioning. Upgraded dual-gear direct extruder features two chrome steel gears that are engaged at a 1:3.5 gear ratio. With a pushing force of up to 80N, the extruder realizes smooth feeding and discharging of flaments without slipping and works extremely well in printing flexible flaments such as TPU.

【4.3 inch Touch Screen】The 4.3-inch touch screen supporting 9 languages, offers efficient UI interaction and is easy to use. It will dim out automatically for energy-saving if there is no action for 3 minutes.

<b>Great Value: </b>Total 27pcs include: 12pcs 0.4mm stainless steel needles,12pcs 0.35mm copper needles, 2pcs different shape precise tweezers, 1pc plastic bottle, Excellently cleaning 3d printer filament clog

<b>Good Performance Needles:</b> The Needles are flexible, won't break, twist easily, this drill bits will clean your printer nozzles and other small parts: throat, feeder gear perfectly

<b>High Quality Tweezers:</b> It include 2 different shape of precise tweezers, great for nozzle maintenance, cleaning up extruder hot ends and cleaning excess support material (PLA/ABS filament).

Very easy to take off the models, NO tools to remove models

Use clips to fix the glass plate on the hot bed.

Higher temperature higher sticky. The models will stick on bed firmly when temperature is high

Easy to Remove Model within 1 Minute: The coating of the microporous composite material has a microporous structure. The filament will be 'extruded' due to the reduction of platform temperature and shrinkage of composite materials, which makes the model remove easily.

High Viscosity and Strong Adhesion: Composite nano molecule coating has high viscosity after heating, which makes the model have strong adhesion.

0.15MM of Flatness Recovery Model: This is the combination of glass and composite. Due to the flatness of glass and the uniform composite coating of surface 'lattice', the platform has excellent flatness.

WELL MADE PEI SHEET- Spring stainless steel, PEI powder sprayed on the surface, golden yellow on the back. Our PEI bed is flexible, removable, and pei sheet can stick to magnetics very well. High strength and heat resistance.

ALL NEW FUNCTIONALITY - The flexible surface of the ender 3 Pro PEI bed can easily be cut to any dimension making it perfect for all build sizes and all FDM printer models.No more tape, no more glue, no more shovel, and release your printing anxiety.

EASY MODEL REMOVAL-The PEI spring steel 235x235 is easy to adhere to the printing surface, easy to remove the prints and flex slightly to pop your print right off.

Parameter--Input diameter: 1.75mm, Output Diameter: 0.8mm, Out thread: M6.

Premium Quality--The 3D printer nozzles are made of high quality brass material, sturdy and durable, brass can be used to print PLA, ABS and most any other non-abrasive materials.

Premium Characteristics--MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the greatest extent, low thermal conductivity, resistant to corrosion, high abrasion resistance.